Instructions for IC CPD (waterfall light)

Microsoft Word Instructions for IC CPD Waterfall light IC CPD Instructions Standards IEC 62196 1 2014, IEC 62196 2 2014, IEC 61851 1 2017 IEC 62752 2016 Rated Voltage 220V AC（95 270 for North America.

IC-CPD Instructions A、Parameters Standards IEC 62196-1 2014, IEC 62196-2 2014, IEC 61851-1 2017 IEC 62752 2016 Rated Voltage 220V AC（95-270 for North American market） Rated Current 8A-10A-13A-16A/16A-25A-32A Operating Freqyebcy 50Hz Insulation Resistance ＞10MΩ Level of Pretection IC-CPD IP67,Vehicle Connector IP54 Contact Resistance ≤0.5mΩ Insection&Extraction Force Operating Temperature ≤100N -40℃～+50℃ Storing Temperature -40℃～+80℃ Operating Humidity 5%～95RH weight 2.1kg B、Safety Informations Thanks for using adjustable IC-PCD，please read instructions carefully before using the product in order to help you use the product correctly Symbol： Caution The symbol means: In the case of may or some extent endanger the safety of personal and property or damage the product facilities, give a reminder to avoid accidents Symbol： Warning The symbol means：In the case of seriously endangering personal and property safety or damage to product facilities, prohibition instructions are given to avoid serious consequences Caution  The product should avoid to immerse in water as far as possible it should be above 0.75m away from the ground in charging  Do not tramp, pull, bend, knot and other rough actions on vehicle connector and cable  The product is a precision integrated circuit equipment, to avoid falling from high place, heavy objects hit pressure and other behaviors  The minimum operating temperature of the product is -40℃  The supply cable specification is 3*4mm2  The surface label of this product is waterproof Please not tear the label forcibly Warning  This product is only used in the environment with leakage protector at the supply end  If the cable is damaged, not use this product  The product is only used for electric vehicles  The product must be use in well grounded  Do not use extra wire or switch plug in charging  It is strictly prohibited to touch the internal conductive unit of the vehicle connector with fingers  It is strictly prohibited to disassemble and repair C、Caution ● Ensure the charging equipment, charging interface, cable, IC-CPD, wires and plug surface without damage, rust and other abnormal conditions before charging ● When the surface of the supply plug,vehicle connector, IC-CPD damp or stained, please wipe it with a dry and clean cloth under the condition of power failure to ensure that the product can be used normally ● Before charging, please make sure that the supply plug is consistent with the specification and model of the supply socket ● In charging status, the IC-CPD should be placed in a clean and tidy space to ensure that the cables are neatly and placed without folding or winding ● Do not use this product in the environment of corrosive liquid, flammable dust, flammable materials, etc 1、 D、Charging Operation Steps 1、First of all, make ture the gounding function of power soket is well done 2、To check whether the local voltage is consistent with the rated voltage 3、Plug into power supply,the LED will power on,the equipment start to selfinspection,it will be for seconds.then you can see the charging interface Self-inspection interface Charging interface 4、Current Setting A When the blue waterfall light is on(not blinking),Long press function switch seconds in charging interface.the function interface is on two options you can see Function interface Power option interface B Short press function switch ,choose power option(the arrow is here ) C Long press function switch(3 seconds),the currents interface will be on 8A Current 16A Current D Short press function switch,the current will be charged.choose the current that you want(there are options for 16A equipment;there are options for 32A equipment) E Long press function switch(3 seconds),the screen will be back to charging interface.the current setting finished F Insert the vehicle connector to vehicle inlet.the waterfall light turns blue to green(blinking means charging,always on means charger finished) 5、Appointment charging Setting A When the blue waterfall light is on(not blinking),Long press function switch seconds in charging interface.the function interface is on two options you can see Function interface Time option interface B Short press function switch ,choose time option(the arrow is here ) C Long press function switch(3 seconds),the time interface will be on No time setting Finished time setting D Short press function switch, set the time that you want(one press one hour,12 hours can be set) F Stay the time interface on insert the vehicle connector to vehicle inlet.the waterfall light turns blue to green.start to charge E、Waterfall light and Screen status Description Waterfall light Screen Vehicle connector status Status R/G/B Blinking Self-inspection interface Disconnected Self-inspection Blue on Function interface Disconnected Standby Function interface/setting Blue on Current setting Disconnected interface Current setting Green blinking Function interface Connected Charging Green on Function interface Connected Charger finished Red on Earth Protection Connected Charging fault Red on Overvoltage Proteciton Connected Charging fault Red on Undervoltage Proteciton Connected Charging fault Red on Leak Protection Connected Charging fault Red on Overcurrent Protection Connected Charging fault Red on Overtemperature Protection Connected Charging fault Red on Relay Fault Connected Charging fault Red on Communication Failure Connected Charging fault F、Dimension 1， Product Length 5000mm 2， Power cable is 500mm long（From plug to function box） 3， Function box length,width,height:246.5*96*53.5mm 4， Vehicle Connector cable is 4500mm long（From Connector to box） 5， Packaging length,width,height:360*230*120mm G、Product Name and Quantity Serial Number Name Quantity Adjustable IC-CPD Instruction Quality Certificate Bag(Customer Requirement) H、Warranty 1， The pruducts have passed strict inspection.The products have a one-year warranty,except for quality problems caused for improper operation 2， The products because of the user's improper handling, installation, improper use and maintenance, or due to natural disasters of the general product damage or scrap, are not within the scope of warranty ... Voltage 220V AC（95-270 for North American market） Rated Current 8A-10A-13A-16A/16A-25A-32A Operating Freqyebcy 50Hz Insulation Resistance ＞10MΩ Level of Pretection IC- CPD IP67,Vehicle Connector IP54... Insection&Extraction Force Operating Temperature ≤100N -40℃～+50℃ Storing Temperature -40℃～+80℃ Operating Humidity 5%～95RH weight 2.1kg B、Safety Informations Thanks for using adjustable IC- PCD，please read instructions. .. product  The product is only used for electric vehicles  The product must be use in well grounded  Do not use extra wire or switch plug in charging  It is strictly prohibited to touch the internal