2 measure RF cable loss for CIS BR 20141211

10-1 Li-Shin-Yi RD, Science-Based Industry Park, Hsin-Chu 300, Taiwan Phone: 011-886-3-666-7799; Fax: 011-886-3-666-7711 URL: www Wneweb.com Wistron NeWeb Corp Measure RF Cable Loss Operation Procedure Prepared by: Mir Zhang Approved by: Andy Fang Department: NH Engineering Department Date: 2014/12/09 This document contains proprietary information that is the property of Wistron NeWeb Corporation and is strictly confidential and shall not be disclosed to others in whole or in part, reproduced, copied, or used as basic for design, manufacturing or sale of apparatus without the written permission of Wistron NeWeb Corporation 一一 Purpose Easier to setup production line for Engineer 一一 Scope Only for L91,LR21 model process 一一 Software Install 3.1 IQ-xel Measure RF cable loss Procedure 3.1.1 Power On IQ-xel, press button (Fig.1), continue press soft button(Fig.2) Copyright® Wistron NeWeb All Rights Reserved All Other Trademarks mentioned are the Property of Their respective owners 10-1 Li-Shin-Yi RD, Science-Based Industry Park, Hsin-Chu 300, Taiwan Phone: 011-886-3-666-7799; Fax: 011-886-3-666-7711 URL: www Wneweb.com Wistron NeWeb Corp Fig.1 Fig.2 3.1.2 Setting Neworkcard IP address is: 192.168.100.100 (as Fig.31)Open IE browser, entering IQ-xel’s IP address: 192.168.100.254(Fig.3-2,Fig.4) Copyright® Wistron NeWeb All Rights Reserved All Other Trademarks mentioned are the Property of Their respective owners 10-1 Li-Shin-Yi RD, Science-Based Industry Park, Hsin-Chu 300, Taiwan Phone: 011-886-3-666-7799; Fax: 011-886-3-666-7711 URL: www Wneweb.com Wistron NeWeb Corp Fig.3-1 Fig.3 Copyright® Wistron NeWeb All Rights Reserved All Other Trademarks mentioned are the Property of Their respective owners 10-1 Li-Shin-Yi RD, Science-Based Industry Park, Hsin-Chu 300, Taiwan Phone: 011-886-3-666-7799; Fax: 011-886-3-666-7711 URL: www Wneweb.com Wistron NeWeb Corp Fig.4 3.1.3 click “admin”, select “diagnostics”, as Fig.5 Fig.5 3.1.4 unload any RF connector or RF cable (as Fig.6 -1)click “Start Diagnostics”(Fig.6), waiting for a moment, it will show the result , click ok(Fig.7) Copyright® Wistron NeWeb All Rights Reserved All Other Trademarks mentioned are the Property of Their respective owners 10-1 Li-Shin-Yi RD, Science-Based Industry Park, Hsin-Chu 300, Taiwan Phone: 011-886-3-666-7799; Fax: 011-886-3-666-7711 URL: www Wneweb.com Wistron NeWeb Corp Fig.6-1 Fig.6 Copyright® Wistron NeWeb All Rights Reserved All Other Trademarks mentioned are the Property of Their respective owners 10-1 Li-Shin-Yi RD, Science-Based Industry Park, Hsin-Chu 300, Taiwan Phone: 011-886-3-666-7799; Fax: 011-886-3-666-7711 URL: www Wneweb.com Wistron NeWeb Corp Fig.7 3.1.5 click “tools”, select ”port routing”(Fig.8) Fig.8 3.1.6 click “VSA”(transmit power port) and “VSG”(receive power port), Fig.9 Copyright® Wistron NeWeb All Rights Reserved All Other Trademarks mentioned are the Property of Their respective owners 10-1 Li-Shin-Yi RD, Science-Based Industry Park, Hsin-Chu 300, Taiwan Phone: 011-886-3-666-7799; Fax: 011-886-3-666-7711 URL: www Wneweb.com Wistron NeWeb Corp Fig.9 3.1.7 click ”Technology”, select “WIFI SISO”, as Fig.10 Fig.10 3.1.8 click “VSG1 ->settings”, and then setting band=2(enter the keypad), Frequency=2G4, as Fig.11 Copyright® Wistron NeWeb All Rights Reserved All Other Trademarks mentioned are the Property of Their respective owners 10-1 Li-Shin-Yi RD, Science-Based Industry Park, Hsin-Chu 300, Taiwan Phone: 011-886-3-666-7799; Fax: 011-886-3-666-7711 URL: www Wneweb.com Wistron NeWeb Corp Fig.11 3.1.9 click “VSG1->Hardware”, select “waveforms->load”, as Fig.12 Fig.12 3.1.10.select the file “wifi>WIFI_N_BW20_SS1_MCS2_BCC_Fs80M.iqvsg”, as Fig.13 Copyright® Wistron NeWeb All Rights Reserved All Other Trademarks mentioned are the Property of Their respective owners 10-1 Li-Shin-Yi RD, Science-Based Industry Park, Hsin-Chu 300, Taiwan Phone: 011-886-3-666-7799; Fax: 011-886-3-666-7711 URL: www Wneweb.com Wistron NeWeb Corp Fig.13 3.1.11.setting Frequency=2412MHz, Power level= -10dB, click “waveforms->play”, as Fig.14 Fig.14 3.1.12.click “VSA1->Results”, select “TXQuality OFDM”, as Fig.15 Copyright® Wistron NeWeb All Rights Reserved All Other Trademarks mentioned are the Property of Their respective owners 10-1 Li-Shin-Yi RD, Science-Based Industry Park, Hsin-Chu 300, Taiwan Phone: 011-886-3-666-7799; Fax: 011-886-3-666-7711 URL: www Wneweb.com Wistron NeWeb Corp Fig.15 3.1.13.loop RF1 and RF2 as Fig.16 Fig.16 3.1.14.setting frequency (which you want to measure!), then click “VSA1->Hardware ->VSA settings ->AGC”, record the power in” TX Quality OFDM ->Power: ???”(as Fig.17), for example: if power =-10.3dBm, the RF cable loss= -10.3-(-10.0)=-0.3dB 10 Copyright® Wistron NeWeb All Rights Reserved All Other Trademarks mentioned are the Property of Their respective owners 10-1 Li-Shin-Yi RD, Science-Based Industry Park, Hsin-Chu 300, Taiwan Phone: 011-886-3-666-7799; Fax: 011-886-3-666-7711 URL: www Wneweb.com Wistron NeWeb Corp Fig.17 3.1.15.changed other Frequency ,and return 3.1.14 record the loss, which you measured 11 Copyright® Wistron NeWeb All Rights Reserved All Other Trademarks mentioned are the Property of Their respective owners ... Wistron NeWeb Corp Fig.1 Fig .2 3.1 .2 Setting Neworkcard IP address is: 1 92. 168.100.100 (as Fig.31)Open IE browser, entering IQ-xel’s IP address: 1 92. 168.100 .25 4(Fig.3 -2, Fig.4) Copyright® Wistron... NeWeb Corp Fig.11 3.1.9 click “VSG1->Hardware”, select “waveforms->load”, as Fig. 12 Fig. 12 3.1.10.select the file “wifi>WIFI_N_BW20_SS1_MCS2_BCC_Fs80M.iqvsg”, as Fig.13 Copyright® Wistron NeWeb All... “admin”, select “diagnostics”, as Fig.5 Fig.5 3.1.4 unload any RF connector or RF cable (as Fig.6 -1)click “Start Diagnostics”(Fig.6), waiting for a moment, it will show the result , click ok(Fig.7)