computational chemogenomics
UV-disinfection Reactor Validation by Computational Fluid Dynamics and Relation to Biodosimetry and Actinometry
... output×Number of lamps/Volume of reactor (12) It was founded that the higher UV density leads to higher β values VALIDATION OF UV REACTOR BY COMPUTATIONAL FLUID DYNAMICS MODEL To know UV dose distribution ... turbulence and UV intensity gradient of reactor - 80 - Journal of Water and Environment Technology, Vol.3, No.1, 2005 Table the mixing characteristic coefficient...
Modeling optimizes PEM fuel cell durability using threedimensional multi-phase computational fluid dynamics model
... three-dimensional, multi-phase computational fluid dynamics model of a PEM fuel cell has been developed to investigate the hygro-thermal stresses in PEM fuel cell, which developed during the cell operation ... non-isothermal computational fluid dynamics model of a PEM fuel cell has been developed to simulate the hygro and thermal stresses in PEM fuel...
Computational fluid dynamics analysis of a twisted airfoil shaped two-bladed H-Darrieus rotor made from fibreglass reinforced plastic (FRP)
... types of Darrieus rotors are mainly available, namely troop skein (Eggbeater) Darrieus rotor and H-Darrieus rotor H-Darrieus rotor was in the same patent of 1931[2] It has two to three airfoil shaped ... 0.265 at a TSR of 2.214, and the maximum Ct obtained is 0.124 at a TSR of 1.962 And the standard deviation of computational Cp from experimental Cp is 0.81% an...
A computational study to investigate the effects of insulation and EGR in a diesel engine
... of insulation of an IDI diesel engine The indicated power increased at the adiabatic case 30% and 22.5% in part and full loads respectively Although in the EGR applying case, performance characteristics ... also worked as a Professor and Head of department in the Department of Mechanical Engineering, Vidya Vikas Institute of Technology, Andhra Pradesh,...
Computational Intelligence In Manufacturing Handbook P3
... holonic concepts into a manufacturing setting: Holon: An autonomous and cooperative building block of a manufacturing system for transforming, transporting, storing, and/or validating information ... be applied to manufacturing enterprise integration, supply chain management, intelligent design, manufacturing scheduling and control, material handling, and holonic manufacturing syste...
Computational Intelligence In Manufacturing Handbook P5
... Simulation of scheduling rules in a flexible manufacturing system using fuzzy logic, IEA-AIE96 Ninth International Conference on Industrial and Engineering Application of Artificial Intelligence and ... Part Dispatching Rules in FMSs This section explains a fuzzy real-time routing selection and an intelligent decision-making tool using fuzzy expert systems for machine loading in an FM...
Computational Intelligence In Manufacturing Handbook P4
... components for cellular manufacturing, keeping a concurrent engineering framework in mind It utilizes two middle layers, as shown in Figure 4.4 The inputs for the network include design features ... themselves In the traditional part–machine incidence matrix, assuming binary values, sequence information is ignored To include sequence information, a sequence-based incidence matrix is in...
Computational Intelligence In Manufacturing Handbook P7
... An intelligent design retrieving system should aim toward a natural linking of the next process planning and manufacturing stages 7.2.4 Conducting Retrieval Tasks with a Certain Degree of Incomplete ... engineering designs can be adapted in the research to represent a design One major disadvantage of using image-based indexing is that the disappearance of hidden features and internal line...
Computational Intelligence In Manufacturing Handbook P6
... design objectives may include minimizing intercellular movements, minimizing set-up time, minimizing machine load variation or maximizing machine utilization, and minimizing the system’s costs ... Algorithm for Finding the Optimum Process Routings for Parts The aim of a cellular manufacturing system design is minimizing the cost of the system It can be gained by dividing the system into ind...
Computational Plasticity- P2
... formulation Comp Meth Appl Mech Engrng 66: 199-219 Part II: Computational aspects Comp Meth Appl Mech Engrng 68: 1-31 Sim´ JC, Hughes TJR (1998) Computational inelasticity Springer-Verlag, New o York ... large strain elastoa plasticity In: Bathe KJ (ed) Computational fluid and solid mechanics 2003 Elsevier, Oxford 15 Mont´ns FJ, Bathe KJ (2005) Computational issues in large strain elas...
Computational Plasticity- P3
... medium and long–range forces which emerge in materials where Eugenio Oñate and Roger Owen (eds.), Computational Plasticity, 55–66 © 2007 Springer Printed in the Netherlands Please purchase PDF Split-Merge ... Surface-to-Surface Discretization Strategies for Analysis of Interface Mechanics Tod A Laursen and Bin Yang Computational Mechanics Laboratory Department of Civil and Environmental E...
Computational Intelligence In Manufacturing Handbook P9
... crossover of two strings Input: Output: string-1 and string-2 offspring-1 and offspring-2 Determine a cut point randomly from all the positions of a string Each string is divided into two parts, ... to be used in order to convert a piece-part from its original form to a final form that is specified on a detailed engineering drawing For machining, process planning includes determination of ......
Computational Intelligence In Manufacturing Handbook P8
... applying parallel machines in industrial manufacturing, only a handful of papers are found on sequencing machining operations for parallel machines [3, 22] The combinatorial nature of sequencing ... capability of activating i cutting tools (I Ն i Ն 1) on distinct MUs, in parallel, either for the purpose of machining a single workpiece, or for the purpose of machining, in parallel, l wo...
Computational Plasticity- P4
... dominated by large strains The relatively low computational cost (Calvo et al., 2003) of those techniques allows frequent remeshing without leading to unaffordable computational costs Alpha-shape techniques ... specific problems So far, most of the research and applications of PFEM can be found in the context of computational fluid dynamics (CFD) to tackle fluid mechanics problems in typica...
Từ khóa:
- computational methods in mass
- a computational treatment of sentence
- computational aspects of mgrammars
- association for computational linguistics
- a computational theory of prosestyle
- a computational theory of perspective
- a general computational treatment of comparatives
- a computational model of reference