Materials Handbook 15th 2010 Part 7 docx
Materials Handbook 15th 2010 Part 7 docx
... of 8,200 lb/in
2
( 57 MPa), a flex-
ural strength of 11,000 lb/in
2
(76 MPa), a compressive strength of
40,000 lb/in
2
( 276 MPa), and a modulus of 2.5 ϫ 10
6
lb/in
2
( 172 , 375
MPa). And having ... carbon monoxide emissions. Using gasoline with 2 .7%
oxygen by weight reduces these emissions by 15 to 20%. The 2 .7% is
typically met by blending 7. 7% ethanol or 15 MTBE by volume.
Califor...
Materials Handbook 15th 2010 Part 1 pptx
... at 350°F ( 177 °C). It also
increases use temperature, from 300°F (149°C) to 350°F ( 177 °C). FM
94 epoxy film adhesive, from Cytec Fiberite, cures at either 250°F
(121°C) or 350°F ( 177 °C), and has ... website.
Source: Materials Handbook
various particle sizes for use in glass and vitreous enamels to
increase the strength and luster. Hydrated alumina C -74 1 is this
material with partic...
Materials Handbook 15th 2010 Part 2 pps
... high-melting-point alloy for heavy service. It
melts at 78 8°F (420°C). Tinite is a tin-base metal hardened with
copper. Ajax bull contains 76 % lead, 7 tin, and 17 antimony, modi-
fied with other elements.
BAGASSE. ... phosphorus.
BIOMATERIALS. Materials used to repair, restore, or replace dam-
aged or diseased tissue, or those that comprise parts of artificial
organs, artificial tiss...
Materials Handbook 15th 2010 Part 3 ppsx
... react with oxygen at temperatures
above 800°F (4 27 C), necessitating oxygen-barrier coatings. Silicon
carbide, 0.005 to 0.0 07 in (0.1 27 to 0. 178 mm) thick, serves as such
a coating for applications ... Co., has a particle diameter of 1,140 in (29 m) and
a pH of 4.8, while Thermax MT, a thermal process black of Cancarb
Ltd., has a particle size of 10,800 in ( 274 m) and a pH of 7....
Materials Handbook 15th 2010 Part 4 pot
... use to about 350°F ( 177 °C).
Cycom 5250-4, 5260, and 5 270 -1 are BMIs from Cytec Fiberite. The
5250-4 and toughened 5260 have service temperatures to about 350°F
( 177 °C), the 5 270 -1 to as high as ... gravity, 5.5 to 7. 3; tensile strength, 75 ,000 to 155,000
lb/in
2
(5 17 to 1,069 MPa); modulus of elasticity, 36ϫ10
6
to 55ϫ10
6
lb/in
2
(248,000 to 379 ,000 MPa); and Rockwell hardness...
Materials Handbook 15th 2010 Part 5 potx
... thickness of the bark varies from
0.5 to 2 in (1. 27 to 5.08 cm). Cork bark is shipped in bales of 170 lb
(77 .1 kg), and cork wastes in bales of 148 lb ( 67. 1 kg).
Brazilian cork is the bark of the tree ... interparticle spacing, and the volume fraction of the
particle phase. In general, strength, especially at high temperatures,
improves as interparticle spacing decreases. Depending on...
Materials Handbook 15th 2010 Part 8 ppt
... 550°F ( 174 and 288°C).
It is a hydrocarbon of composition C
10
H
22
to C
16
H
34
, with a specific
gravity between 0 .74 7 and 0 .77 5. Commercial kerosene may be as
high a distillate as 6 17 F (325°C), ... 100,000 tons (90 ,70 0 metric
tons) of lignin occurs in the liquor from 1ϫ10
6
tons (9 07, 000 metric
tons) of sulfate-process paper pulp.
The melting point of lignin is 482 to 5 27 F (25...
Materials Handbook 15th 2010 Part 10 doc
... marketed in rolls of
widths from 30 to 72 in (76 to 183 cm) and in standard sheets vary-
ing from cap, 17 by 13 in (43 by 33 cm), to antiquarian, 52 by 31 in
(132 by 79 cm). Tracing cloth is made from ... den-
sity of 0.2 97 lb/in
3
(8,221 kg/m
3
), a coefficient of thermal expansion at
70 to 1600°F (21 to 871 °C) of 9.1 ϫ 10
Ϫ6
/°F (16.3 ϫ 10
Ϫ6
/K), and a
melting range of 2300 to 2 470...
Materials Handbook 15th 2010 Part 12 doc
... increases to 84,000 lb/in
2
( 579 MPa) and
yield strength to 62,000 lb/in
2
(4 27 MPa), while elongation
decreases to 3%. The alloy has a density of 0.316 lb/in
3
(8 ,74 7
kg/m
3
) and, annealed, has ... Freon 12. It liquefies at Ϫ21 .7 F (Ϫ30°C). Freon E3
is a fluorated hydrocarbon which boils at 306°F (152°C) and is stable
to 570 °F (299°C). It is pourable at 175 °F (79 °C). It is used for...
Materials Handbook 15th 2010 Part 15 doc
... carbide. It is used
for parts requiring high strength and hardness at high temperatures.
The alloy retains a tensile strength of 75 ,000 lb/in
2
(5 17 MPa) at
3500°F (19 27 C). Ammonium metatungstate, ... tensile strength above 100,000 lb/in
2
(690 MPa) at 1292°F (70 0°C), 70 ,000 lb/in
2
(483 MPa) at 1832°F
(1000°C), and 40,000 lb/in
2
( 276 MPa) at 2192°F (1200°C).
Vanadium salts are use...