... drive shaft and tripod.(3) Using a brass bar and hammer, remove the tripodfrom the drive shaft.(e) Remove the inboard and outboard joint boots and clamps.Slide out the 2 boots and 4 clamps.NOTICE:Do ... matchmarks on the drive shaft, inner race and cage.(2) Remove the 6 balls and cage.(3) Using a snap ring expander, remove the snap ring.(4) Using a brass bar and hammer, remove the innerrace.NOTICE:Be ... inner race.(5) Using a snap ring expander, remove the snap ring.(e) Remove inboard and outboard joint boots and inboardjoint clamps. Slide out the 2 boots and clamps.NOTICE:Do not disassemble...