4.2 Operation and use of key board
4.2.5 Method for operating keypad
Can carry on various operation to the inverter through keypad for example:
(1) Status parameter display switching:
After pressing key display C group status supervision parameter; after displaying one supervision parameter code for 1 second, will display this parameter value automatically.
electrification
ENTER ENTER
MENU Second-class
menu
First class menu Third-class
menu
MENU/ESC
MENU /ESC ENTER/DATAstore para.
Editing status Waiting status
parameter Display or run status parameter display or failure alarm display
Set frequency
Switch display run parameter Frequency
setting mode Digital provision MENU /ESC
ESC MENU
ENTER
DATA ENTER
ESC DATA MENU
SHIFT
www.enc.net.cn/en Tel/Fax:86-755-26984485/26985120 4 Run and operation explanation for inverter
Fig. 4-6 waiting status parameter display operating example Description:
1> All status parameters C-00 C-14 can be displayed when the inverter leaves factory. You can make a change by modifying function code F2.11, F2.12 if you want to, for detail please refer to F2.11, F2.12function code description.
2> Can press key to switch into constant supervision C-01 display status directly when the user see about status supervision parameter.
(2) Function code parameter setting
Take function code F2.06 modified from 5.00Hz to 6.00Hz as example.
Boldface in Fig.4-7 shows flickering digit.
Fig.4-7 example for parameter setting and modification
Description: under third-class menu, if the parameter has no blinking digit this function code can’t be modified possible reasons are as follows:
1> This function code shouldn’t be modified, for example actualdetected status parameter, run record parameter etc.
2> This function code can’t be modified under run status and can be changed after stopping running
ENTER DATA
50.00 -F0- -F2- F2.00 F2.06
05.00 -F2-
Key-press operation
order Enter into
editing Status display first-class menu
Choose F2 group function code
Function group confirmation go into second-class menu
Choose function code F2.06
Go back to First-class
menu Exit editing
status
Store modified value,back to second-class menu Display next function code LEDdisplayed
content
05.00
F2.07 06.00
Function code confirmation, Enter into third-class menu Parameter
modification, Choose parameter digit
Parameter modification, 5 6 ESC
MENU ENTER
DATA ENTER
DATA
SHIFT ENTER
DATA ESC
MENU ESC
MENU LED displayed content
1s 1s
50.00 C-01 Set frequency
Key-press operation order
Output frequency Output current
Output voltage Pulse input
Para. value C-02 Para. value
C-03 1s parameter C-14
1s parameter
SHIFT SHIFT
SHIFT SHIFT
SHIFT
www.enc.net.cn/en Tel/Fax:86-755-26984485/26985120 4 Run and operation explanation for inverter
3> Parameter protected. All the function code can’t be modified when function code F2.13=1 or 2 in order to avoid wrong operation. Need to set the function code F2.13 to 0 if you want to edit function code parameter.
(3) Specified frequency adjustment for common run
Take example modifying specified frequency from 50.00Hz to 40.00Hz at F0.00=0 during running for explanation.
Fig. 4-8 set frequency adjustment operation example (4) Jog run operation
For example, keypad as current run command channel, jog run frequency 5Hz, waiting status.
Fig.4-9 Jog run operating example
(5) Operation for entering to function code editing status after setting user password
“user password”FF.00 is set to 6886 . Boldfaced digit in Fig.4-7 shows blinking bit.
Fig.4-10 inputting password to go into function code operation 0.0.0.6 6.0.0.6 0.0.0.0
50.00 0.0.0.6
6.8.0.6 6.0.0.6 6.8.8.6
-F0- 6.8.0.6
Nonediting status
user password effective, go into password validation status
At first last Digit flash, Increase to 6
move cursor position to first digit
Increase to 6
Increase to 8
Increase to 8
Move to second digit Press confirmation
Key, pass validation, Go into editing status
Move to third digit LED displayed
content Key-press operation order
ENTER DATA
SHIFT ESC
MENU
SHIFT SHIFT
5.00 50.00
0.01 50.00
release
waiting waiting
Display run output frequency
Output frequency Increased by 5Hz LED displayed
content Key-press operation
order Display set frequency
press keep
Output frequency Fall down to 0Hz Stop running
0.01
REVJOG REV
JOG REV
JOG
50.00 45.00 40.00
Press decreasing button for one time
Adjust frequency based on requirement 49.99
Stop pressing after set value reached, go back to normal display status after 1 second LED displayed
content Key-press operation order
www.enc.net.cn/en Tel/Fax:86-755-26984485/26985120 4 Run and operation explanation for inverter
(6) See about failure parameter under failure status:
Fig.4-11 failure status searching operation example Description:
1> If press key under failure status the user can see about Fd group function code parameter, search range Fd.06 Fd.14 LED first display function code number when the user press key and display parameter digit of this function code after 1s.
2> When the user see about failure parameter can press key directly to switch back to failure alarm display status (E0XX)
(7) keypad key-press locking operation
Under unlocked keypad situation press key for 5s to lock the keypad.
For detailed operation please refer to 2nd bit of F2.13 function code.
(8) keypad key-press unlocking operation
Under locked keypad situation press key for 5s to unlock the keypad.
1s 1s 1s
1s
E001 Fd.06 50:00 Fd.07 45:00 Fd.08 5.5
Fd.09 380
Fd.13 1111
1s Fd.14
1500 1s
Failure set freq. Failure output freq. Failure current
Failure output volt.
Failure terminal status Failure run time
LED displayed content
Key-press operation order
SHIFT SHIFT SHIFT
SHIFT SHIFT
SHIFT SHIFT
SHIFT
SHIFT
ENTER DATA
ESC MENU
ESC MENU
www.enc.net.cn/en Tel/Fax:86-755-26984485/26985120 4 Run and operation explanation for inverter