Xuất các nghiên cứu tiếp theo

Một phần của tài liệu Thiết kế, chế tạo cơ cấu va đập tích hợp rung động theo phương ngang (Trang 66 - 70)

Trong phạm vi của đề tài này, vì giới hạn về thời gian không cho phép, mặc dù nghiên cứu đã chế tạo, vận hành thử nghiệm thành công cơ cấu rung va đập mới và đã đƣa ra đƣợc bộ thông số gồm tần số và khe hở va đập cho ra khoảng di chuyến lớn nhất nhƣng còn có một số vấn đề cần đƣợc nghiên cứu và tìm hiểu sâu hơn cho cơ cấu này ở các bƣớc kế tiếp. Cụ thể là:

Thử nghiệm tác dụng của rung động theo các phƣơng khác nhau. Tối ƣu hóa kích thƣớc và công suất.

Luận văn Thạc sỹ Kỹ thuật Chuyên ngành: CN-CTM

Số hóa bởi Trung tâm Học liệu http://www.lrc-tnu.edu.vn/

Tài liệu tham khảo

[1]. Erofeev L.V., Russian Impact-Vibration Pile driving Equipment;

[2]. Van-Du Nguyen and Ko-Choong Woo, Nonlinear dynamic responses of new electro- vibroimpact system, Journal of Sound and Vibration; Volume 310, Issues 4-5 (2008), pp. 769-775.

[3]. Van-Du Nguyen and Ko-Choong Woo, New electro-vibroimpact system, Proceeding of The Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, Vol. 222, No. 4. (2008), pp. 629-642.

[4]. Van-Du Nguyen, Ko-Choong Woo and Ekaterina Pavlovskaia, Experimental study and Mathematical Modelling of a New of Vibro-impact moling device, International Journal of Non-Linear Mechanics, vol. 43 (2008), issue 6, pp.542-550.

[5]. Jee-Hou Ho, Van Du Nguyen and Ko-Choong Woo, Nonlinear dynamics of a new electro-vibroimpact system; Nonlinear Dynamics; Vol 63; No 1-2; (2011); pp 35-49. [6]. Van-Du Nguyen and Ko-Choong Woo, Optimization of a solenoid-actuated vibro- impact mechanism for ground moling machines; Proceeding of the XXXV International conference “Advanced Problems in Mechanics”, St. Peterburg (Russia); 2007; pp. 459-471;

[7]. Rodger A.A. and Littlejohn G.S., A study of vibratory driving in granular soils, Geotechnique 30, 269, 1980

[8]. Lok, H.P., Neilson, R.D. and Rodger, A.A., Computer-based model of vibro-impact driving, Proceedings of ASME DETC: Symposium on Nonlinear Dynamics in Engineering Systems, Las Vegas, 1999;

[9]. Krivtsov A.M. and Wiercigroch M., Penetration rate prediction for percussive drilling via dry friction model, Chaos Solitons and Fractals 11 (2000), pp 2479-2485. [10]. Pavlovskaia E., Wiercigroch M., Woo K.-C., Rodger A.A., Modelling of Ground

Moling Dynamics by an Impact Oscillator with a Frictional Slider, Meccanica 38 (2003); pp 85-97.

[11]. Franca L.F.P., Weber H.I., Experimental and numerical study of a new resonance hammer drilling model with drift, Chaos, Solitons and Fractals 21 (2004), pp 789- 801;

Luận văn Thạc sỹ Kỹ thuật Chuyên ngành: CN-CTM

Số hóa bởi Trung tâm Học liệu http://www.lrc-tnu.edu.vn/

[12]. Nguyễn Văn Dự, La Ngọc Tuấn, Nguyễn Đăng Hào, Lê Xuân Hƣng; A New Electro-Mechanical Vibro-Impact Mechanism; International Conference "Recent Advances in Nonlinear Mechanics", Kuala Lumpur 9/2009.

[13]. Barkan, D.D., Dynamics of Bases and Foundations, McGraw-Hill, New York, 1962.

[14]. Mendrela E.A. and Pudlowski Z.J.; Transients and dynamics in a linear reluctance selfoscillating motor; IEEE Transactions on Energy Conversion, 7(1), pp 183-191, 1992. [15]. Mendrella,E.A., (1999), Comparision of the performance of a linear reluctance

oscillating motor operaring under ac supply with one under dc supply, IEEE Transactions on Energy Conversion,14(3), pp 328-332.

[16]. Nguyễn Văn Dự, Nonlinear Dynamics of Electro-Mechanical Vibro-Impact Machines, Luận án Tiến sỹ, Đại học Nottingham.

[17]. Erofeev L.V., Russian Impact-Vibration Pile driving Equipment. Available online at

http://www.vulcanhammer.net/info/udarvib.php.

[18]. Barkan, D.D (1962), Dynamics of Bases and Foundations, McGraw-Hill, New York. [19]. Pavlovskaia E., Wiercigroch, M. and Grebogi, C, (2001), Modelling of an impact

system with a drift, Phys. Rev. E 64, 056224.

[20]. Wiercigroch M., Krivtsov A. and Wojewoda, J. IN (2000) Nonlinear Dynamics and chaos of mechanical systems with discontinuities (M.Wiercigroch and B de Kraker, editors), Singapore: World Scientific, Dynamics of high frequency percussive drilling of hard materials.

[21]. Wiercigroch M.,Wojewoda J. and Krivtsov A.M (2005) Dynamics of ultrasonic percussive drilling of hard rocks, Journal of Sound and Vibration, 280(3-5):739-757. [22]. Woo, K.-C., Rodger, A.A., Neilson, R.D. and Wiercigroch, M., (2000)Application

of the harmonic balance method to ground moling devices operating in periodic regimes, Chaos, Solitons Fract, 11(15), 2515-2525.

[23]. Miller C., Bredemyer L. (2006), Innovative safety valve selection techniques and data. Journal of Hazardous Materials, (in print).

[24]. Topcu E.E, Yuksel I, Kamis Z (2006), Development of electro-pneumatic fast switching valve and investigation of its characteristics. Mechatronics 16, pp 365–378.

[25]. Ahn K., Yokota S.,(2005), Intelligent switching control of pneumatic actuator using on/off solenoid valves. Mechatronics 15, pp 683–702.

Luận văn Thạc sỹ Kỹ thuật Chuyên ngành: CN-CTM

Số hóa bởi Trung tâm Học liệu http://www.lrc-tnu.edu.vn/

[26]. Kallenbacha E., Kubea H., Zoe ppiga V., Feindta K., Hermannb, Beyerb F. (1999), New polarized electromagnetic actuators as integrated mechatronic components – design and application. Mechatronics 9, pp 769-784.

[27]. Gomis-Bellmunt O., Galceran-Arellano S., Andreu A.S., Montesinos-iracle D., Campanile L.F.,(2006), Linear electromagnetic actuator modeling for optimization of mechatronic and adaptronic systems. Mechatronics 17:153-163.

[28]. Rashedin R. and Meydan T., (2006) Solenoid actuator for loudspeaker application. Sensors and Actuators A 129, pp 220–223.

[29]. Nguyễn Văn Dự (2007), Mô hình nghiên cứu động lực học của một cơ cấu rung va đập mới, Tạp chí Khoa học & Công nghệ, Đại học Thái Nguyên; 4(44) Tập 1; 10/2007 trang 39-44.

[30]. Nguyen Van Du and Ko Choong Woo (2005), Experimental investigation of frictional characteristics of vibro-impact moling, IMA International Conference Recent Advances in Nonlinear Mechanics Aberdeen, UK, Book of abstract,

Springer 2005.

[31]. Jee-Hou Ho, Nguyen Van Du and Ko-Choong Woo,( 2007) Nonlinear dynamics and chaos of new electro-vibroimpact system; Chaos, Solitons and Fractals; Accepted December; in press.

[32]. Nguyen Van Du and Woo Ko Choong(2007), New and effective vibro-impact mechanism, International conference, Advance Problems in Mechanics, St. Peterburg (Russia), June 2007, pp 459-471.

[33]. Nguyen Van Du and Ko-Choong Woo, (2008) New electro-vibroimpact system, Journal of Mechanical Engineering Science, Vol. 222, No. 4. (2008), pp. 629-642. [34]. Nguyen Van Du and K-C. Woo,( 2008) Nonlinear dynamic responses of new

electro-vibroimpact system, Journal of Sound and Vibration; Volume 310, Issues 4-5, March 2008, pp. 769-775.

[35]. Nguyen Van Du, Ko Choong Woo and Pavlovskaia E (2007), Experimental study and mathematical modelling of a New of vibro-impact moling device, International Journal of Nonlinear Mechanics, vol. 43 (2008), issue 6, pp. 542-550.

Luận văn Thạc sỹ Kỹ thuật Chuyên ngành: CN-CTM

Số hóa bởi Trung tâm Học liệu http://www.lrc-tnu.edu.vn/

Một phần của tài liệu Thiết kế, chế tạo cơ cấu va đập tích hợp rung động theo phương ngang (Trang 66 - 70)