... attributes and
inf
H
the factor of opening’s position and
air force exposure.
Annual heating demand of the building is 33.78 kWh/m
2
whereas cooling demand is 27.34 kWh/m
2
.
3. GSHP system ... reads the annual TRNSYS heatingandcooling load profile so as to
determine the values of the peak heatingandcooling loads for each month of the year (see Table 2) and
their durations. Moreover, ... temperature estimations (average deviation ±2.5 K) when annual heatingandcooling
demand values are close and approximately equal to 30 kWh/m
2
and it is assumed heat pump absence.
5. Conclusion...
... INFORMATION
1-1. PURPOSE AND SCOPE. This document provides criteria and guidance for the design and
construction of heatingandcooling distribution systems and supplements information in ... INFORMATION
1-1. PURPOSE AND SCOPE. This document provides criteria and guidance for the design and
construction of heatingandcooling distribution systems and supplements information in ... Systems in
Concrete Trenches, Prefabricated Underground Heating/ Cooling Distribution Systems, and Aboveground
Heat Distribution Systems. The designer is also responsible for the expansion and...
... INFORMATION
1-1. PURPOSE AND SCOPE. This document provides criteria and guidance for the design and
construction of heatingandcooling distribution systems and supplements information in ... distribution systems include Heat Distribution
Systems in Concrete Trenches, Pre-engineered Underground Heat Distribution Systems, Prefabricated
Underground Heating/ Cooling Distribution Systems, and ... selecting the system type, refer to ASHRAE Handbook, "HVAC Systems and Equipment.”
2-3. SYSTEM TYPES. When selecting a distribution system, the designer must determine which system
types...
... HTHW and steam systems and PVC encased, prefabricated
underground heating/ cooling distribution systems to avoid thermal degradation of the PVC.
CEMP-E TI 810-32
10 January 2002
i
HEATING AND ... INFORMATION
1-1. PURPOSE AND SCOPE. This document provides criteria and guidance for the design and
construction of heatingandcooling distribution systems and supplements information in ... selecting the system type, refer to ASHRAE Handbook, "HVAC Systems and Equipment.”
2-3. SYSTEM TYPES. When selecting a distribution system, the designer must determine which system
types...
... Command from PC to phone, request send an SMS message to
3.2.4 Structure of ACK command from phone to PC
Type: type command of command needed to ack
IV. Details of the links in the system ... some PC to connect to remote PC and send device
control command. To do that, we open a chat window from YM and send a message
which contains standard control commands (ex: D01: ON#, Reload# ) ... 1221) and IP for each PC. The program on
center PC is designed to send control commands (messages) to remote PC after
connecting successfully. The program on remote PC will receive commands and...