Thông tin tài liệu
Below Ground Fiber
Cross-Connect Systems (FSS96)
SPEC SHEET SPEC SHEET
www.adc.com • +1-952-938-8080 • 1-800-366-3891
ADC's FSS96 Below Ground Fiber Cross-Connect Enclosure allows service providers
the flexiblity to cost effectively meet their customer's service requirements.
Features:
• 96 termination capacity with splicing
• Built-in cable management and slack storage facilities
• Hand hole, manhole, pole or aerial mounting
12/05 • 101672AE
Below Ground Fiber Cross Connect
Below Ground Fiber Cross-Connect Systems
Application
2
www.adc.com • +1-952-938-8080 • 1-800-366-3891
The FSS96 is used at key FSAI flexibility points to:
• Optimize feeder and distribution plant fibers via cross-connect
• Reduce network operational costs
• Improve customer service levels
Feeder Cable
(24 Fibers)
12 F
12 F
12 F
24 F
Central Office
12/05 • 101672AE
Below Ground Fiber Cross Connect
Below Ground Fiber Cross-Connect Systems
Application
3
www.adc.com • +1-952-938-8080 • 1-800-366-3891
• 96 termination capacity with splicing
• Built in slack storage system allows use of single length patch cord within entire system
• Connect any feeder fiber to any distribution fiber with a 1.5 meter patch cord
• For use in aerial, pole mount, hand hole and manhole applications
• Base and dome closure allows easy access to terminations
• Cable entrance provisions for up to 12 OSP cables
• Cable blocking and bonding hardware provided
Oval Port for (2)
cables 10-25 mm
(0.4"-1.0")
cables 5-32 mm
Five round ports for
(0.2"-1.25")
Ground feed-
through lug
Mechanical
dome-to-base Seal
710 mm (28")
(Cable seals add 100 mm
(4") to length)
240 mm
(9.5")
260 mm
(10.2")
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you
may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications,
Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or
features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
101672AE 12/05 Revision © 2004, 2005 ADC Telecommunications, Inc. All Rights Reserved
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
SPEC SHEET
Catalog Number
FSS96-A
* Configured closures come equipped with hardware for sealing the specified
number of OSP cables
Splice Tray Type
Single Fiber HS Fusion2
* Number of Incoming OSP Cables
Number Between 02 and 12
Pigtail Type
Adapters only
Single Fiber 900m
0
A
—
Connectory Type
SMFC
PCFC Zirconia Sleeve
SMST
SMSC
PCSC Zirconia Sleeve
AFC
ASC
MMLC
SMLC
ALX.5
2
3
4
7
8
D
E
K
P
Y
Loaded Positions
12 Fiber
24 Fiber
36 Fiber
48 Fiber
60 Fiber
72 Fiber
96 Fiber
B
C
D
E
F
G
H
Cross Connect patch cords are ordered seperately
- 1.5 meter long patch cords are recommended
- Patch cord diameter should be 2.0 mm or less
Configured Closure Ordering Scheme
. Below Ground Fiber
Cross-Connect Systems (FSS96)
SPEC SHEET SPEC SHEET
www.adc.com • +1-952-938-8080 • 1-800-366-3891
ADC's FSS96 Below Ground Fiber. pole or aerial mounting
12/05 • 101672AE
Below Ground Fiber Cross Connect
Below Ground Fiber Cross-Connect Systems
Application
2
www.adc.com • +1-952-938-8080
Ngày đăng: 24/01/2014, 11:20
Xem thêm: Tài liệu Below Ground Fiber Cross-Connect Systems (FSS96) pdf, Tài liệu Below Ground Fiber Cross-Connect Systems (FSS96) pdf