Tài liệu Fiber Optic Panel (FOP) doc

Fiber Optic Panel (FOP) ADC’s family of Fiber Optic Panel (FOP) products are used in situations when fiber counts are less than 400. The line contains flexible solutions for wall, cabinet and rack mounting. In the case of rack mounting solutions, splicing is generally done on frame. All products stress four key elements of fiber cable management: bend radius protection, cable routing paths, cable and connector access and physical protection. The FOP family includes: FMT, FPL, FL2000, FL1000 rack mount, and the FL1000 Wall Box. Panel Types Models Port Counts Fiber Counts FMT-1RU Termination Drawer w/ Adapters or Pigtails 24 24 Termination & Splice Drawer w/ Adapters or Pigtails 24 24 Termination Drawer w/ Multifiber Cable 24 24 Termination & Storage Drawer 24 24 FMT-2RU Termination Drawer w/ Adapters or Pigtails 72 72 Termination & Splice Drawer w/ Adapters or Pigtails 48 48 Termination Drawer w/ Multifiber Cable 72 72 FPL Termination Panel w/ Adapters or Pigtails 12 to 144, 288* 12, 24, 48, 144, 2x144* Termination & Splice Panel w/ Adapters or Pigtails 12 to 144, 288* 12, 24, 48, 144, 2x144* Termination Panel w/ Multifiber Cable 12 to 144, 288* 12, 24, 48, 144, 2x144* *Using LC small form factor connectors. w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Cable Lengths (in meters) 8, 16, 23, 31, 39, 46, 54, 61, 77, 92 Note: Non-standard cable lengths also available. Cable Lengths (in feet) 25, 50, 75, 100, 125, 150, 175, 200, 250, 300 Connector Types Singlemode Multimode SC Ultra Polish SC SC Angled Polish SC Duplex SC Ultra Polish Duplex LC FC Ultra Polish LC Ultra Polish LC Angled Polish Note: Non-standard connector types also available. FPL Cable Types Singlemode Multimode IFC Stranded Riser IFC Stranded 62.5/125 µm IFC Ribbon Riser IFC Stranded 50/125 µm OSP Ribbon Armor OSP Stranded Dielectric FMT 1RU FMT-1RU Rack Mount FMT-2RU Rack Mount FPL Rack Mount Recommended applications 1.75"H – all front access 19"/23" all purpose panel; highest density in 1RU chassis 3.5"H – all front access 19"/23" all purpose panel; highest density in 2RU chassis IDF; small wire closet; high-density termination/splice panel solution; 288-fiber termination/splice in 8.75"H or 48-fiber termination/splice in 1.75" H (LC connectors) Number of fibers, future growth potential 12 to 32 48 to 72 12 to 144 Flexibility/ ability to grow Growth should be well planned and limited Growth should be well planned and limited Growth should be well planned and limited Interconnect Yes Yes Ideal Cross-connect Not recommended Not recommended Not recommended Accommodates on-frame splicing Yes. Built-in Yes. Built-in Yes. Built-in Accommodates off-frame splicing Yes. IFC + assembly available Yes. IFC + assembly available Yes. IFC cable + assembly available Rear access Not required Not required Required All front access Yes Yes No Customer premises application Ideal Ideal Ideal Wall mount Yes. A wall mount kit is available Yes. A wall mount kit is available No Cabinet mount Yes. Panel has option for 40 mm recess mount Yes. Panel has option for 40 mm recess mount Not recommended Mix equipment w/ fiber product? Ideal Ideal Ideal Use as dedicated fiber frame Not recommended Not recommended Not recommended 19" mounting Yes. Designed for it Yes. Designed for it Yes. Designed for it 23" mounting Yes. Adjustable Yes. Adjustable Yes. Adjustable 600 mm mounting ETSI compatible mounting option available ETSI compatible mounting option available N/A VAM capabilites No Yes. MicroVAM plug-ins available No Optimum jumper storage location Can be configured with storage Can be configured with storage IMP or separate storage panel required Vertical cable guide VCG available as separate item VCG available as separate item Includes VCG on both sides w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 FMT - 1RU Termination and Splice Drawer with Adapters or Pigtails 12-Termination/Splice (right splice entry) 24-Termination/Splice (right splice entry) Catalog Number FMT -__ __ __ 0 __ 0 __ __ __ - A __ __ P Drawer Configuration TL Term splice with splice tray (left splice entry) TR Term splice with splice tray (right splice entry) TU Universal entry (rear entry only) Lock Type Number of Ports 12 24 Pigtail or Adapter Type Chip Style (mini splice tray) Connector and Adapter Type The termination and splice tray terminates and splices fibers in an all-front-access design. This tray mounts in 19-inch, or 23-inch racks. Sliding radius limiters provide cable management for incoming and outgoing fibers. Panels loaded with pigtails come with color-coded 900 µm pigtails. 0 N/A 2 Heat shrink 3 Mechanical 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Cable Entry D Front Entry J Rear Entry Multimode 9 SC Singlemode 2 FC ultra polish 7 SC ultra polish J SC angled polish A Adapters only K Multimode pigtails (62.5/125 µm) U Singlemode Maxi-Strip pigtails R Singlemode ribbon pigtails The information below represents one of ADC’s leading Fiber Optic Panel products, the FMT 1RU Termination and Splice Drawer. This information is representative of ADC’s easier-to-understand ordering approach. See the Fiber Optic Panel catalog for information on this and other related products. 1 All 483 mm (19)" or 584 mm (23") mounting brackets are reversible and can mount in EIA and WECO racks. Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our Web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 104074AE 2/07 Original © 2007 ADC Telecommunications, Inc. All Rights Reserved Fiber Raceway Solutions (FiberGuide ® ) Splice Vault Cable Entrance Solutions (FEC) High-Density FDF Lineup Solutions (NGF, NG3) Level 3 FL1000 Wall Box Plenum FiberGuide ® Level 2 FL2000 Wall Mount Panel Plenum FiberGuide Level 1 OMX 600 ® Fiber Distribution Frame Plenum FiberGuide VAMs Customer Premises FL1000 Wallbox FiberGuide Express Exit ™ Traditional FDF Lineup Solutions (8" FCM, LSX) Intermediate FDF Solutions (8" FCM) FL2000 Panel FiberGuide ® Flex Tubing RiserGuide Vertical FiberGuide FPL Panel FMT Panel Fiber Optic Transport Lineup Fiber Optic Panel Solutions (FOP) Fiber Cable Assembly & Connector Solutions (FCC) Value-Added Module (VAM) Solutions (Monitors, Splitters, WDM, CWDM) Central Office 24" 12" 12" 12" 6" 6" 6" 6" 6" 6" . Tubing RiserGuide Vertical FiberGuide FPL Panel FMT Panel Fiber Optic Transport Lineup Fiber Optic Panel Solutions (FOP) Fiber Cable Assembly &. Fiber Optic Panel (FOP) ADC’s family of Fiber Optic Panel (FOP) products are used in situations when fiber counts are less than