Tài liệu End user standard update ppt

23 KRONE Standard Update Training Singapore 29 – 31 July 2002 Instructor: Anton Indrawata KRONE KRONE Standard Update Training Standard Update Training Singapore Singapore 29 29 – – 31 July 2002 31 July 2002 Instructor: Anton Instructor: Anton Indrawata Indrawata 23 Standards Framework  Mandatory z Local Authority Technical Standards: z Cable and cabling components (Permit or CCL required) z Wiring Practices (particularly separations/segregation's)  Industry Recommendations z ISO/IEC 11801 & EIA/TIA 568 B : Structured Cabling Design, dimensions, component specification, installation practices, compliance testing, Class D or Cat.5E bandwidth up to100MHz, Class E or Cat. 6 bandwidth up to 250 MHz parameters. z EIA/TIA 569A: Design and installation practices of cabling pathways, spaces, support structures, termination, cross connect enclosures and cable entrance facilities. z EIA/TIA 606: Administration of communications cabling systems includes plant symbols, cable records and component labeling. 23 Local Authority Compliance  Only licensed cable's install/maintain  Cable, cabling products and customer equipments must be either:  Labeled with local authority permit number, or  Listed in the Certified Components List ( CCL ), or  Labeled with the local authority symbol  All customer equipment shall exhibit Authority permits 23 Authority Technical Standards  Ensure a safe environment for: z carrier’s personnel z customer/user z carrier’s equipment and; z interference-free operation for carrier’s equipment z correct inter-working between carrier’s equipment and customer premises equipment 23 Cabling Standardisation history Cat 5 Cat 5E Cat 6, 7 Cat3 Cat4 = TIA 568-BTIA/ EIA TIA 568 TSB 36 TSB 40A TIA 568A TSB 67,72,75 TIA568A Add 1-5 TIA 568B.2-1 + = + ++ 1,2,3 ISO Class D New Class D Class E, F ISO 11801 Add 1-2 ISO 11801 Ed.2 ISO 11801 EN 50173 EN 50173 Add 1 1991 1995 1999 2001 CENELEC EN 50173 Ed.2 2000 2002 23 ISO/IEC 11801 Standards history  The first and most important document in this series is ISO/IEC 11801  ISO/IEC 11801 – 1995: Generic Cabling for Customer Premises z Defines performance of Category 5 / Class D of Basic and Channel Link z Superseded by ISO/IEC 11801 2 nd edition 2002  ISO/IEC 11801 AMENDMENT2- 1999 z Major update to ISO/IEC 11801 – 1995 z Adds requirements for new measurements, defines Permanent Link and Channel z Harmonized with EIA/TIA 568B Cat 5E  ISO/IEC 11801 2 nd edition – 2002 z The 2 nd edition incorporate specifications for Category 6 / Class E and Category 7 / Class F cabling components 23 CENELEC Standards history  EN 50173 - 1995: Generic Cabling Standard for Customer Premises z Specifies generic cabling for use within commercial premises z Very similar to ISO 11801 z Amendment 1999 add permanent link and channel definitions as well as new measurement parameters  EN 50173 – 2000 2 nd edition z To harmonize with ISO 11801 2 nd edition and include specifications of Category 6 / Class E and Category 7 / Class F cabling components  EN 50174-1-1999: Administration, documentation, records z Describes requirements for administration system, documentation of pathway, spaces, cables, terminations, grounding in accordance with EN 50173 23 North American Standards history  EIA/TIA 568A - 1995: Commercial Building Telecommunications Wiring Standard z Establishes technical and performance criteria for cabling system configuration, interfacing and connecting hardware  EIA/TIA 568A-A1 – 1998: Delay & Delay Skew z Defines and specifies requirement s for propagation delay and delay skew in cables, components, basic link and channels z Replaced by EIA/TIA 568B  TIA 568A-A2 – 1998: Miscellaneous Changes z Requirement for testing connecting hardware with both common and differential mode terminations z Replaced by EIA/TIA 568B 23 North American Standards history  EIA/TIA 568A-A3 – 1998: Bundled and Hybrid Cables z Defines and specifies requirement for testing of bundled and hybrid cables z Replaced by EIA/TIA 568B  EIA/TIA 568A-A4 – 1999: Patch Cords z Defines and specifies NEXT and RL for patch cables z Replaced by EIA/TIA 568B  EIA/TIA 568A-A5 – 1999: Additional Transmission Performance Specifications for Enhanced Category 5 Cabling z Provides performance requirements for Enhanced Category 5 components, cables and links; includes all the measurements in TSB67 and TSB95, Replaced by EIA/TIA 568B 23 North American Standards history  EIA/TIA 568B.1 – 2000: Commercial Building Telecommunications Wiring Standard z This is a major standard release that updates and replaces: TSB67, TSB72, TSB75, TSB95, TIA 568A and its addendum’s 1,2,3,4,5 and TIA ScTP. z Include Category 5E performance levels, 50/125um fiber z Category 5E becomes the minimum accepted performance level  EIA/TIA 568-B.2: 100 Ohm Twisted Pair Cabling Standard z Technical content 0n 100 Ohm twisted pair cabling referenced by TIA 568-B.1  EIA/TIA 568 – B.2-1: Category 6 z The draft 11 th has been ratified and finalized in June 17,2002, the most complete document providing Category 6 performance [...]...North American Standards history EIA/TIA 568-B.3: Optical Fibre Cabling Standard Technical content on optical fibre cabling that is referenced by EIA/TIA 568-B.1 EIA/TIA 568-B.4: Shielded Twisted Pair Cabling Standard Technical content on shielded twisted pair cabling that is referenced by EIA/TIA 568-B.1 EIA/TIA 569A – 1995: Commercial Building Standard for Telecommunications Pathways... Telecommunications Wiring Standard Specifies residential cabling systems, requirements and structure 23 North American Standards history EIA/TIA 606 – 1994: Administration Standard for the Telecommunications Infrastructure of Commercial Buildings Specifies administration of communications wiring and connecting hardware, building distribution systems, grounding and bonding Standardized labeling and... •Testing TSB-95 Document : •Cable •Connector •Link •Model 568-B.2 100 ohm UTP/FTP 568-B.3 FIBER 568-B.4 STP-A 23 CENELEC Standards history EN 50173 - 1995: Generic Cabling Standard for Customer Premises Specifies generic cabling for use within commercial premises Very similar to ISO 11801 Amendment 1999 add permanent link and channel definitions as well as new measurement parameters EN 50173 – 2000 2nd edition... installed cabling inpremises To be used for acceptance testing, verification, and trouble shooting of faults 23 CENELEC Standards history EN 50173 - 1995: Generic Cabling Standard for Customer Premises Specifies generic cabling for use within commercial premises Very similar to ISO 11801 Amendment 1999 add permanent link and channel definitions as well as new measurement parameters EN 50173 – 2000 2nd edition... 50174-1-1999: Administration, documentation, records Describes requirements for administration system, documentation of pathway, spaces, cables, terminations, grounding in accordance with EN 50173 23 CENELEC Standards history EN 50174-2-2000: Planning and installation practises Specifies requirements for planning, specification, quality, assurance and installation of new balanced copper and optical fibre EN... performance requirements for the basicl link and channel, wire map, length, attenuation, NEXT Defines field measurement procedures and test instruments requirements; replaced by EIA/TIA 568B 23 North American Standards history EIA/TIA TSB95 – 1999: Additional Transmission Performance Specification for UTP For Gigabit Ethernet: defines minimum test requirements for RL, ELFEXT, Powersum ELFEXT, propagation delay... spaces, cables, terminations, grounding in accordance with EN 50173 23 EIA/TIA 569-A Overview EIA/TIA 569 pays attention to: Pathway separation from electrically - noisy sources Securing practices Minimum bending radii and minimizing hauling tensions Design/installation of closets, enclosures, equipment room and lead-in cable entrance facilities Pathway techniques: catenaries trays ducting down poles 23... other possible communication services 23 ISO 1180, General Purposes ISO/ IEC 11801 ensures: Flexibility Minimizes disruption Future proofing Guarantees transmission quality Compatibility without being vendor-specific Cabling support for a wide range of communications applications 23 ISO 11801, General Purposes Structured Cabling Elements: Campus Distributor (CD) - previously campus MDF Campus Backbone... Floor Distributor (FD) - previously floor IDC or TC Horizontal (floor) cabling Transition Point (TP) - optional and should be avoided Telecommunications Outlet (TO) Consolidation Point (CP) MUTO - Multi User Telecommunications Outlet 23 Campus Application of Generic Cabling System Horizontal cabling FLOOR DISTRIBUTOR equipped with: Active and Passive components FD TO Cross connect TO Optical-electrical . 23 KRONE Standard Update Training Singapore 29 – 31 July 2002 Instructor: Anton Indrawata KRONE KRONE Standard Update Training Standard Update Training Singapore Singapore 29. American Standards history  EIA/TIA 568B.1 – 2000: Commercial Building Telecommunications Wiring Standard z This is a major standard release that updates