Tài liệu Compact Gas Springs P1 docx

subject to alterations f199 2·11936·8·1 ° Compact Gas Springs f200 subject to alterations Clamping flange VDI 3003 for 2480.21./2490.12.00420 Mounting example: 2·12599·8·1 ° Compact Gas Springs for small displacement and high forces Mounting variations 2490.12.00420. Pedestal foot clamp for 2490.12.00420 subject to alterations F201 Compact Gas Springs for small displacement 2490.12.00420. and high forces 2·12600·8·2 ° 2490.12.00420. 2490.12.00420.2490.12.00420. M6x5,5 deep stroke max. 2490.12.00420. Initial spring force at 150 bar = 420 daN stroke Order No max. l min l 2490.12.00420 .006 6 50 56 010 10 60 70 016 16 75 91 025 25 95 120 032 32 108 140 040 40 125 165 050 50 145 195 Note: Worn gas springs cannot be repaired, they have to be replaced completely. Pressure medium: Nitrogen N 2 Max. filling pressure: 150 bar Min. filling pressure: 25 bar Working temperature: 0°C to +80°C Temperature related force increase: ±0.3%/°C Max. recommended extensions per minute: approx. 50–100 (at 20°C) Max. piston speed: 0.5 m/s Valve f202 subject to alterations Mounting example: 2·19685· 2005·1 ° Compact Gas Springs for small displacement and high forces Mounting Variations 2490.12.00750. see Note! stroke stroke subject to alterations F203 Compact Gas Springs for small displacement 2490.12.00750. and high forces Note: Worn gas springs cannot be repaired, they have to be replaced completely. When mounting to floor, contact over the entire floor of the cylinder tube must be ensured! Pressure medium: Nitrogen N 2 Max. filling pressure: 150 bar Min. filling pressure: 25 bar Working temperature: 0°C to +80°C Temperature related force increase: ±0.3%/°C Max. recommended extensions per minute: approx. 50–100 (at 20°C) Max. piston speed: 0.5 m/s 2·19690·2005·1 ° 2490.12.00750. 2490.12.00750. M6 x 5,5 deep 2490.12.00750. stroke max. View X M6 Valve 2490.12.00750. Initial spring force at 150 bar = 750 daN stroke Order No max. l min. l g 2 * 2490.12.00750. 006 6 56,75 63 51 010 10 64,75 75 59 016 16 76,75 93 71 025 25 94,75 120 89 032 32 107,75 140 102 040 40 124,75 165 119 050 50 144,75 195 139 g 2 * see mounting example f204 subject to alterations 2·11937·8·1 ° Compact Gas Springs Mounting Variations 2490.12.01000. Note: 2) Attention: The spring force must be absorbed by the stop surface. Mounting example: Mounting example: with adapter baseplate with adapter baseplate stroke stroke stroke stroke see Note! subject to alterations F205 2490.12.01000. Initial spring force at 150 bar = 1000 daN stroke Order No max. l min. l g 2 * 2490.12.01000. 006 6 54,75 61 49 010 10 67,75 78 62 016 16 83,75 100 78 025 25 109,75 135 104 032 32 134,75 167 129 040 40 154,75 195 149 050 50 179,75 230 174 g 2 * see mounting example Compact Gas Springs for small displacement 2490.12.01000. and high forces Note: Order No for spare parts kit: 2490.12.01000 When mounting to floor, contact over the entire floor of the cylinder tube must be ensured! Before fitting the adapter base plate remove the valve from the gas spring. If vibration occurs, tighten the fixing screws accordingly. Pressure medium: Nitrogen N 2 Max. filling pressure: 150 bar Min. filling pressure: 25 bar Working temperature: 0°C to +80°C Temperature related force increase: ±0.3%/°C Max. recommended extensions per minute: approx. 100 (at 20°C) Max. piston speed: 0.5 m/s 2·11938·8·1 ° 2490.12.01000. 2490.12.01000. M6 x 6,5 deep 2490.12.01000. stroke max. View X M6 Valve 2480.00.20.01000 Adapter baseplate with connecting fitting, without valve (only for use with composite connections) f206 subject to alterations 2·11939·8·1 ° Compact Gas Springs Mounting Variations 2490.12.01800. Notes: 2) Attention: The spring force must be absorbed by the stop surface. 4) Square collar flange, non- rotating, fixing for composite connection. 5) Machine screws with hexa- gonal socket (compact head recommended). with adapter baseplate with adapter baseplate stroke stroke stroke stroke see Note! stroke Mounting example: Mounting example: subject to alterations F207 Compact Gas Springs for small displacement 2490.12.01800. and high forces Note: Order No for spare parts kit: 2490.12.01800 When mounting to floor, contact over the entire floor of the cylinder tube must be ensured! Before fitting the adapter base plate remove the valve from the gas spring. If vibration occurs, tighten the fixing screws accordingly. Pressure medium: Nitrogen N 2 Max. filling pressure: 150 bar Min. filling pressure: 25 bar Working temperature: 0°C to +80°C Temperature related force increase: ±0.3%/°C Max. recommended extensions per minute: approx. 100 (at 20°C) Max. piston speed: 0.5 m/s 2·11940·8·1 ° 2490.12.01800. 2490.12.01800. 2490.12.01800. Initial spring force at 150 bar = 1800 daN stroke Order No max. l min. l g 2 * 2490.12.01800. 006 6 59,75 66 52 010 10 69,75 80 62 016 16 89,75 106 82 025 25 109,75 135 102 032 32 129,75 162 122 040 40 149,75 190 142 050 50 169,75 220 162 g 2 * see mounting example 2490.12.01800. stroke max. deep View X Valve 2480.00.20.01800 11 x 6,9 deep (2x) Adapter baseplate with connecting tting, without valve (only for use with composite connections) fitting, rotating deep Screws M6 x 20 (2x) DIN EN ISO 4762 Connecting f208 subject to alterations 2·19695·2005·1 ° Compact Gas Springs for small displacement and high forces Mounting Variations 2490.12.03000. with adapter baseplate with adapter baseplate stroke stroke stroke see Note! Mounting example: Mounting example: [...]... ‹‹ SPC GAS Springs, cushioned TM AP P R O V ED /2 3 /E C 2· 21386·2007·1  k 97 subject to alterations f227 ››Speed ControlTM‹‹, SPC Gas Springs, cushioned Description FIBRO SPC Gas Springs »Speed ControlTM« have been engineered to reduce or eliminate blank holder bounce; commonly associated with increased return stroke speeds form link drive presses Benefits of the »Speed ControlTM« SPC Gas Springs, ... 4762 (3x) subject to alterations F211 Compact Gas Springs for small displacement and high forces Mounting Variations 2) A  ttention: The spring force must be absorbed by the stop surface 2490.13.07500 Mounting example: with adapter baseplate 2·11943·8·1  ° Mounting example: f212 subject to alterations 2490.13.07500 replaces 2490.12.07500 2490.13.07500 Compact Gas Springs for small displacement and high... 2490.13.04700 stroke Compact Gas Springs for small displacement and high forces Mounting Variations 2) A  ttention: The spring force must be absorbed by the stop surface Mounting example: with adapter baseplate see Note! f210 with adapter baseplate subject to alterations 2·11941·8·1  ° stroke stroke Mounting example: 2490.13.04700 replaces 2490.12.04700 2490.13.04700 Compact Gas Springs for small displacement... 2490.12.11800 Compact Gas Springs for small displacement and high forces Valve g2* see mounting example Note: 2480.00.20.11800 Order No for spare parts kit: 2490.12.11800 Adapter baseplate with connecting Fitting 18 x 11 deep (4x) When mounting to floor, contact over the entire floor of the cylinder tube must be ensured! Before fitting the adapter base plate remove the valve from the gas spring M10... subject to alterations F215 2490.12.18300 stroke stroke Compact Gas Springs for small displacement and high forces Mounting Variations stroke Notes: 2) A  ttention: The spring force must be absorbed by the stop surface 4) S  quare collar flange, nonrotating, fixing for composite connection 5) Mounting example: M  achine screws with hexagonal socket (compact head recommended) with adapter baseplate see... to alterations F223 Gas Springs with Low Build Height Mounting Variations 2485.12.01500 Notes: A  ttention: The spring force must be absorbed by the stop surface 4) S  quare collar flange, nonrotating, fixing for composite connection 5) M  achine screws with hexagonal socket (compact head recommended) 2·11954·8·1  ° 2) f224 subject to alterations 2485.12.01500 2485.12.01500 Gas Spring with Low... subject to alterations F213 2490.12.11800 stroke stroke Compact Gas Springs for small displacement and high forces Mounting Variations stroke Notes: 2) A  ttention: The spring force must be absorbed by the stop surface 4) S  quare collar flange, nonrotating, fixing for composite connection 5) Mounting example: M  achine screws with hexagonal socket (compact head recommended) with adapter baseplate see... 4762 (4x) subject to alterations F217 2·11949·8· 1  ° f218 subject to alterations 80 PH AS 80 IN G 100 OU T 20 20 Gas Springs with Low Build Height Power Line 2487.12.00500.025 53 82 82 PH AS IN G 100 OU T 135 Construction heights with the same stroke and the same/increased spring force 53 Compact construction heights 2485.71.00250.025 35 Normal construction heights 2480.12.00250.025 Low construction... · 2 l 2485.12.00500 subject to alterations F221 Gas Springs with Low Build Height Mounting Variations 2485.12.00750 Notes: A  ttention: The spring force must be absorbed by the stop surface 3) N  ot for use with composite connection 4) S  quare collar flange, nonrotating, fixing for composite connection 5) M  achine screws with hexagonal socket (compact head recommended) 2·13106·9·2  ° 2) f222... 2485.12.00750 2485.12.00750 Gas Springs with Low Build Height 2485.12.00750 stroke Order No max 2485.12.00750 06 0 6 013 12,7 019 19 025 25 038 38,1 050 50 063 63,5 080 80 100 100 125 125 lmin 56 62,7 69,1 75 88,1 100 113,5 130 150 175 l 62 75,4 88,1 100 126,2 150 177 210 250 300 strokemax Initial spring force at 150 bar = 750 daN Note: Order No for spare parts kit: 2485.12.00750 Gas spring with 2 connections . ° Compact Gas Springs f200 subject to alterations Clamping flange VDI 3003 for 2480.21./2490.12.00420 Mounting example: 2·12599·8·1 ° Compact Gas Springs. ° Compact Gas Springs for small displacement and high forces Mounting Variations 2490.12.00750. see Note! stroke stroke subject to alterations F203 Compact