Tài liệu Raceway Systems docx

24 325 0
Tài liệu Raceway Systems docx

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

www.adc.com • +1-952-938-8080 • 1-800-366-3891 221 Raceway Systems FiberGuide ® Fiber Cable Management Standard 222 Plenum 238 222 6/04 • 1247379 MSO Market Solutions www.adc.com • +1-952-938-8080 • 1-800-366-3891 222 FiberGuide ® Fiber Management System Introduction The Industry’s Most Comprehensive Optical Raceway System ADC’s FiberGuide ® Fiber Cable Management System is a trough system designed to protect and route fiber optic patch cords, multifiber cable assemblies, and intrafacility fiber cable (IFC) to and from fiber splice enclosures, fiber distribution frames, and fiber optic terminal devices. The FiberGuide system is designed to ensure a 2-inch minimum bend radius is maintained throughout the system. The FiberGuide system is a complete set of products designed and manufactured to ensure total off-frame protection. Basic components include horizontal and vertical straight sections, horizontal and vertical elbows, downspouts, junctions, and numerous support hardware and flex tube kits. The FiberGuide system is available in a variety of sizes: 2x2 — Ideal for smaller installations or for vertical routing into individual fiber bays. It has the trough capacity to support a maximum of (400) 2 mm fiber optic patch cords. All 2x2 FiberGuide products are shipped with covers. 2x6 — Designed for height-restricted environments, this robust system provides the same support and system flexibility of the traditional 4-inch-high system while saving 2 inches of overhead space. It features a maximum capacity of (1,200) 2 mm patch cords. 4x4 — Features the maximum capacity to support (1,600) 2 mm patch cords. It has been engineered to allow straight sections to be self-supporting over a span of up to 6 feet (1.83 m). 4x6 — Features the same benefits of the 4-inch system and a maximum trough capacity of (2,400) 2 mm patch cords. 4x12 — The largest system in the FiberGuide family, this 12-inch- wide trough has a maximum capacity to support nearly (5,000) 2 mm patch cords. Perfect for runs over fiber frame lineups and perimeter routes. 223 6/04 • 1247379 MSO Market Solutions www.adc.com • +1-952-938-8080 • 1-800-366-3891 223 FiberGuide ® Fiber Management System New Products ADC continues to add innovative products to the FiberGuide ® Fiber Management System to ensure that it remains the comprehensive solution for all optical raceway requirements and applications. These new products increase the functionality and flexibility of the FiberGuide System and are compatible with existing raceway components. Snap-Fit Junction ADC introduces the latest addition to its industry-leading FiberGuide System. The Snap-Fit Junction is the industry’s first and only completely tool-less junction. No additional tools are needed for installation or removal. Quick and easy to install, the FiberGuide Snap-Fit Junction saves valuable time and money. Express Exit ™ ADC now features three options, the low-profile Express Exit, 2-Inch Express Exit, and 4-Inch Express Exit in the innovative patented* Express Exit family to accommodate various raceway environments and applications. By simply securing an Express Exit to the sidewall of any 4x4, 4x6, or 4x12 FiberGuide straight section, jumpers can be permanently or temporarily routed to the fiber optic terminal (FOT) equipment or fiber frames below. No cutting of the FiberGuide system is required. Positioning a drop with a member of the Express Exit family greatly simplifies installation, protects the integrity of fibers already present in the raceway, and increases the overall flexibility of the raceway system. 2x6 FiberGuide ® System The 2x6 FiberGuide system provides another option to securely route and protect patch cords. Designed for height-restricted environments, this robust system provides the same support and system flexibility of the traditional 4x6 system while saving 2 inches of overhead space. A complete set of fittings, straight sections, junctions, and an Express Exit are available along with adapters to both the 4x4 and 4x6 systems. Raceway Reconfiguration Solutions ADC introduces two new products to facilitate easy on-site raceway reconfigurations. Available for the 4x4, 4x6, and 4x12 systems, the cut-in T and the expandable straight section provide the required flexibility to optimize raceway systems in retrofit applications without jeopardizing the integrity of existing cables. *Other patents pending Express Exit Family 2x6 FiberGuide System Cut-in T Snap-Fit Junction 224 6/04 • 1247379 MSO Market Solutions www.adc.com • +1-952-938-8080 • 1-800-366-3891 224 FiberGuide ® Fiber Management System Patch Cord Densities 2.0 mm Patch Cords 102 3.0 mm Patch Cords 44 1.7 mm Patch Cords Recommended capacity takes into consideration random jumper placement into the FiberGuide ® system. Maximum density refers to the maximum number of fiber jumpers in a given cross-section of a FiberGuide installation. The TracerLight ™ Connector Identification System is ADC’s newest patch cord solution. It features slightly different dimensions than standard patch cords. Recommended Patch Cord Density (per in 2 ) 2.0 mm Patch Cords 90 3.0 mm Patch Cords 40 2-inch 3-inch 4-inch Trough Pileup 1080 1620 2160 480 720 960 720 1080 1440 320 480 640 2x2 FiberGuide System 360 - - 160 - - 3.0 mm 2.0 mm 4x4 FiberGuide System 4x6 FiberGuide System Maximum Patch Cord Density (per in 2 ) 142 ADC Recommended Density Maximum Density 1.7 mm Patch Cords 120 480 - - 1.7 mm 3.0 mm 2.0 mm 960 1440 1920 1.7 mm 3.0 mm 2.0 mm 1440 2160 2880 1.7 mm 4x12 FiberGuide System 2160 3240 4320 960 1440 1920 3.0 mm 2.0 mm 2880 4320 5760 1.7 mm 2-inch 3-inch 4-inch Trough Pileup 1224 1836 2448 528 792 1056 816 1224 1632 352 528 704 408 - - 176 - - 3.0 mm 2.0 mm 4x4 FiberGuide System 4x6 FiberGuide System 568 - - 3.0 mm 2.0 mm 1136 1704 2272 1.7 mm 3.0 mm 2.0 mm 1704 2556 3408 1.7 mm 4x12 FiberGuide System 2448 3672 4896 1056 1584 2112 3.0 mm 2.0 mm 3408 5112 6816 1.7 mm 2x6 FiberGuide System 1080 - - 480 - - 3.0 mm 2.0 mm 1440 - - 1.7 mm 2x2 FiberGuide System 1.7 mm 1224 - - 528 - - 3.0 mm 2.0 mm 1704 - - 2x6 FiberGuide System 1.7 mm 2-inch 260 780 520 780 1560 3-inch ––780 1170 2340 4-inch ––1040 1560 3120 Trough Pileup 4x4 FiberGuide System 4x6 FiberGuide System 4x12 FiberGuide System 2x2 FiberGuide System 2x6 FiberGuide System TracerLight ™ Patch Cords – 65 Patch Cords per in 2 225 6/04 • 1247379 MSO Market Solutions www.adc.com • +1-952-938-8080 • 1-800-366-3891 225 The rigid 2-inch drop option and 2-inch flex tube option are two methods for directing fibers out of overhead FiberGuide ® downspouts and into optical equipment bays. The rigid system is recommended because it offers excellent bend radius control and ensures a quality fiber backbone installation. 2" Flex Tube Drop Option2"x 2" Rigid Drop Option FGS-MDSP-B 4x6 Downspout FGS-MSHS-B 4x6 Straight Section FGS-MFAW-B 4x6 Junction Assembly FGS-MJWR-C 2x2 Junction Kit FGS-KTW1-C* 2x2 Vertical Slotted Duct Kit FGS-MU4A-C* 2x2 45° Up Elbow FGS-MD4A-C* 2x2 45° Down Elbow FGS-HDSI-AB 4x4/4x6 Downspout Insert FGS-HMEC-B 4x6 End Cap Kit FGS-MDSP-B 4x6 Downspout FGS-MSHS-B 4x6 Straight Section FGS-MFAW-B 4x6 Junction Assembly FGS-HMEC-B 4x6 End Cap Kit FGS-MCDS-AB Cover for 4x6 Downspout FGS-KT03-A1 4x4 End Cap with one 2" Flex Tube, 5' long FGS-KTW1-C 2x2 Vertical Slotted Duct Kit *Shown without cover FiberGuide ® Fiber Management System Applications: Downspout Drop Options For complete ordering information, please contact ADC or visit www.adc.com 226 6/04 • 1247379 MSO Market Solutions www.adc.com • +1-952-938-8080 • 1-800-366-3891 226 The rigid 2-inch drop option and 2-inch flex tube drop option are two methods for delivering patch cords out of overhead FiberGuide ® straight sections and into optical equipment bays. The Express Exit ™ allows a vertical transition virtually anywhere along FiberGuide straight sections. 2"x 2" Rigid Drop Option 2" Flex Tube Drop Option FGS-MSHS-B 4x6 Straight Section FGS-MEXP-A/B/F* Express Exit 2x2 FGS-MJWR-C 2x2 Junction Kit (4) FGS-MSHA-C* 2x2 Horizontal Solid Straight Section FGS-KTW1-C* 2"x 2" Vertical Slotted Duct Kit * Shown without Cover FGS-MD4A-C 2x2 45° Down Elbow FGS-MSHS-B 4x6 Straight Section FGS-MEX1-C-5F 2" Flex Tube Attachment with 5' of Flex Tube FGS-MEXP-A/B/F* Express Exit 2x2 FGS-KTW1-C 2"x 2" Vertical Slotted Duct Kit * Shown with Cover FiberGuide ® Fiber Management System Applications: Express Exit ™ Drop Options For complete ordering information, please contact ADC or visit www.adc.com 227 6/04 • 1247379 MSO Market Solutions www.adc.com • +1-952-938-8080 • 1-800-366-3891 227 For complete ordering information, please contact ADC or visit www.adc.com The trumpet flare is recommended at the bottom of a downspout when directing fibers into a fiber distribution bay. Trumpet flares provide bend radius protection and allow for a large number of fiber patch cords to transition into a fiber bay. A 4x4 trumpet flare is used for the 4x4 and 4x6 downspouts and a 4x6 trumpet flare is used for the 4x12 downspout. FGS-MHRT-F/B 4x12 Horizontal T with single 6" Exit FGS-MFAW-F 4x12 Junction Assembly (2) FGS-HNTR-F-5/8 New Threaded Rod Bracket Kit FGS-MSHS-F 4x12 Horizontal Straight Section FGS-MTRM-B 4x6 Trumpet Flare Kit Horizontal T and Trumpet Flare Downspout with Trumpet Flare FiberGuide ® Fiber Management System Applications: Trumpet Flare Options When attaching a straight section or fitting to the exit of a 4x4 or 4x6 downspout, the FGS-MJWR-A junction must be used. This junction is only required to connect the vertical part, the FGS-MFAW junction can be used to connect the horizontal parts. Shown Assembled FGS-MFAW FGS-MJWR-A Exploded View FGS-MSHS-B 4x6 Straight Section FGS-MDSP-B 4x6 Downspout FGS-MFAW-B 4x6 Junction Assembly (2) FGS-MTRM-A 4x4 Trumpet Flare Kit 228 6/04 • 1247379 MSO Market Solutions www.adc.com • +1-952-938-8080 • 1-800-366-3891 228 For complete ordering information, please contact ADC or visit www.adc.com Fixture attached to sidewall of raceway Fixture protects cables during cutting of sidewall Fitting fills gap left by removed sidewall Supplied hardware secures fitting to raceway and completes installation ADC’s innovative Cut-in T Fitting and Fixture enable on-site raceway modifications without jeopardizing the integrity of installed fibers. Available in 4-, 6-, and 12-inch widths, the cut-in T fitting can be retrofitted to any installed 4-, 6-, and 12-inch straight section using the cut-in T fixture and the hardware supplied with the fitting. No special tools are required. FiberGuide ® Fiber Management System Applications: Cut-in T and Fitting 229 6/04 • 1247379 MSO Market Solutions www.adc.com • +1-952-938-8080 • 1-800-366-3891 229 For complete ordering information, please contact ADC or visit www.adc.com FiberGuide ® Fiber Management System Applications: Expandable Straight Sections Raceway system with gap between opposing runs Completed installation Expandable straight section extends to connect runs ADC’s Expandable Straight Section simplifies installation and enhances the overall flexibility of the raceway system. The innovative straight section also provides an access point for future reconfigurations. Available in 4-, 6-, and 12-inch widths, the expandable straight section reduces the installation time necessary to connect opposing runs and provides continuous support for patch cords. 230 6/04 • 1247379 MSO Market Solutions www.adc.com • +1-952-938-8080 • 1-800-366-3891 230 The 4x12 Island T is designed to be used over the Next Generation Frame (NGF) or FOT storage bay. The 4x12 Island T, a horizontal T with spool and factory-installed trumpet flare, channels fiber directly into the vertical cableways below. 4x12 Island T shown installed over an FOT storage bay FiberGuide ® Fiber Management System Applications: 4x12 Island T ADC also offers a 12-inch Island T with recessed spool. Designed to be used over the NGF or FOT storage bay, it is used in applications where the drop is positioned high above the frame and protection is required for exiting cables. The part is shipped as a T with a factory-installed, recessed spool. A junction and fitting can then be attached to manage the exiting cables. For complete ordering information, please contact ADC or visit www.adc.com [...]... bracket kit FGS-HNTR-F-5/8 FGS-HETR-F-5/8 FGS-HNTS-F-5/8 FGS-HNTS-F-5/8-LP FGS-HNTP-F-5/8 FGS-HNLR-F www.adc.com • +1-952-938-8080 • 1-800-366-3891 236 FiberGuide® Fiber Management System Vertical Duct Systems Ordering Information 6/04 • 1247379 MSO Market Solutions Description Catalog Number 2x2 vertical slotted duct kit, 6-feet 2x2 vertical 1.5-inch slotted duct kit, 6-feet 2x2 vertical solid duct... to support the Plenum FiberGuide system The short, long, span, and diagonal bracket kits are used for supporting straight sections from round or square tubing Flexible tubing: Used in Plenum FiberGuide systems when the exact layout of the equipment drop locations is unknown or when frequent equipment relocations are expected The flexible tubing is 2 inches in diameter and attaches to the end of a 2x2, . to both the 4x4 and 4x6 systems. Raceway Reconfiguration Solutions ADC introduces two new products to facilitate easy on-site raceway reconfigurations the 4x4, 4x6, and 4x12 systems, the cut-in T and the expandable straight section provide the required flexibility to optimize raceway systems in retrofit

Ngày đăng: 17/01/2014, 11:20

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan