Tài liệu Fiber Panels docx

Fiber Panels Wall Mount Boxes FL1000 Fiber Termination Products Rack Mount Panels FL2000 System FPL Series Fiber Panels Fiber Management Trays www.adc.com • 70 75 89 96 +1-952-938-8080 • 1-800-366-3891 69 FL1000 Fiber Termination Products Two-Door Wall-Mount Boxes The FL1000 two-door, wall-mount boxes feature a unique design and many integrated features such as: • Multiple, configurable locking options that allow users and service providers separate access for security • Acceptance of strength member tie-off hardware • Acceptance of cable clamps at each corner MSO Market Solutions Grounding screws, mounting screws, and dust caps are included with each panel Other accessories are available 12-Position Termination/Splice Wall Box Strength Member Tie-Off (Optional) Tie Swing-Out Lance Door Splice Tray (Optional) 13.0" 3.6" Designation Label PNT0 6pak Adapter Plate (Optional With or Without Pigtails) PNT1 11.2" Cable Channel (Optional) Splice Deck Compression Fitting (Optional) Radius Limiter Cable Clamp (4 Places) (Optional) 24-Position Termination/Splice Wall Box 14.0" 3.6" Strength Member Tie-Off (Optional) Tie Swing-Out Lance Splice Tray Door (Optional) Swing-Out Door 1247379 Designation Label 6pak Adapter Plate (Optional With or Without Pigtails) 15.1" Splice Deck Compression Fitting (Optional) Cable Channel (Optional) Cable Clamp Radius Limiter (Optional) (4 Places) • 6/04 Swing-Out Door 48-Position Termination/Splice Wall Box Strength Member Tie-Off (Optional) Tie Swing-Out Lance Door Splice Tray (Optional) Swing-Out Door 17.0" 6.2" 6pak Adapter Plate (Optional With or Without Pigtails) Designation Label 17.7" Cable Clamp (Optional) Radius Limiter Splice (4 places) www.adc.com • Deck +1-952-938-8080 Compression Fitting (Optional) • 1-800-366-3891 70 FL1000 Fiber Termination Products Two-Door Ordering Information Select wall box type Select 6pak (with or without fiber) not installed in wall-mount box (recommended for quicker availability) OR Select 6pak (with or without fiber) installed in wall-mount box Select 6pak adapter type (if factory installed, choose placement in the wall-mount box) Select splice tray with chip Select number of cable clamps (0-9) Select number of compression fittings (0-9) Select number of bonding grounding kits (0-9) Select number of strength member tie-off kits (each wall box accepts 2, maximum) (0-9) Select locks FL1- - Wall Box Type G 2-Door, 12-position termination/splice wall box H 2-Door, 24-position termination/splice wall box J 2-Door, 48-position termination/splice wall box 6paks not Installed into Wall Box (with or without Fiber) N Adapters with pigtails (2.0 mm x 3.0 m) Adapters only None/NA 3A 3B 3C 3D 3E N C A E D C B Door Side Blank None/NA Locks A B C D E N Two A keys Two B keys One A key, one B key One A key One B key None Numerous locking options are available for separate user and service provider access Choose the combination appropriate for your security needs Accessories Cable clamp Compression fittings Bonding grounding kit Strength member tie-off Number of splice trays received depends on amount of 6paks used: 1-2 6paks = splice tray 6paks = splice trays 6paks = splice trays 6paks = splice trays Wall-Mount Bulkhead D Splice Tray with Chip Bare fusion Heat shrink fusion Mechanical (elastomeric) N None Adapters with pigtails preinstalled into wall box (2.0 mm x 3.0 m) Adapters preinstalled into wall box E Singlemode FC ultra polish SC ultra polish F FC 8° angled polish J SC 8° angled polish L FC with zirconia sleeves R SC with zirconia sleeves X LX.5® 6paks Installed into Wall Box (with or without Fiber)* Multimode and Singlemode 6pak Adapter/Connector Type OR 6/04 • 1247379 MSO Market Solutions How to order an FL1000 two-door wall-mount box Enter the desired quantity (0-9) above the corresponding accessory Mounting Wall Side Viewed from Equipment Side * Use the guide above for placement of factory-installed 6paks Place the desired connector or adapter type (from guide above) above the corresponding location designation of 3A, 3B, 3C, 3D or 3E The diagram illustrates the location of each 6pak within the bulkhead Other connector and splice types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 71 FL1000 Fiber Termination Products One-Door Wall-Mount Boxes The FL1000 one-door, wall-mount boxes feature a unique design and many integrated features such as: • Numerous cable tie points within the panels • Ability to accept hasp-style locks • Acceptance of cable clamps at each corner MSO Market Solutions Grounding screws, mounting screws, and dust caps are included with each panel Other accessories are available 12-Position Termination/Splice Wall Box Swing-Out Door Designation Label Splice Tray Shown With Cover Removed (Optional) Compression Fitting (Optional) 1.0" 19.8" 12.0" 7.8" 6pak Adapter Plate (Optional, With or Without Pigtails) 10.2" (25.96 cm) Cable Clamp Grounding Kit Mounting Holes 3.58" 1.2" (9.1 cm) Tie Lance Radius Limiter Splice (4 Places) Deck 24-Position Termination/Splice Wall Box Swing-Out Door Designation Label Splice Tray Shown With Cover Removed (Optional) 6pak Adapter Plate (Optional, With or Without Pigtails) DATE CODE CAT # S/N MADE IN USA 1247379 ‚ 21.4" Compression Fitting (Optional) 13.0" 8.4" Grounding Kit Mounting Holes 3.58" 1.2" (9.1 cm) DANGER BEAM LASER RADIATION INVISIBLE EXPOSURE TO AVOID DIRECT DATE CODE CAT # S/N ‚ MADE IN USA 15" (38.1 cm) DANGER BEAM LASER RADIATION INVISIBLE EXPOSURE TO AVOID DIRECT Cable Clamp Tie Lance 6/04 • Radius Limiter Splice Deck (4 Places) 48-Position Splice Wall Box Designation Label Swing-Out Door Splice Tray Shown With Cover Removed (Optional) Compression Fitting (Optional) 1.0" 21.4" 8.4" 13.0" Grounding Kit Mounting Holes 3.58" 1.2" (9.1 cm) 15" (38.1 cm) Cable Clamp Tie Lance Radius Limiter Splice (4 Places) Deck www.adc.com • +1-952-938-8080 • 1-800-366-3891 72 FL1000 Fiber Termination Products One-Door Ordering Information How to order an FL1000 one-door wall-mount box Select wall box type Select 6pak (with or without fiber) not installed in wall-mount box OR Select 6pak (with or without fiber) installed in wall-mount box Select 6pak adapter type (if factory installed, choose placement in the wall-mount box) Select splice tray with chip Select number of cable clamps (0-9) Select number of compression fittings (0-9) Select number of bonding grounding kits (0-9) FL1- N N - Blank N None/NA Singlemode FC ultra polish SC ultra polish F FC angled polish J SC angled polish K E-2000 angled polish L FC with zirconia sleeves P ST® with zirconia sleeves R SC with zirconia sleeves X LX.5® 6paks not Installed into Wall Box (with or without Fiber) N Multimode and Singlemode 6pak Adapter/Connector Type Wall Box Type A 1-Door, 12-position termination/splice wall box B 1-Door, 24-position termination/splice wall box C 1-Door, 48-position splice-only wall box 3A 3B 3C 3D Adapters with pigtails (2.0 mm x 3.0 m) Adapters only None/NA C Number of splice trays received depends on amount of 6paks used: 1-2 6paks = splice tray 3-4 6paks = splice trays Wall Box Type C = splice trays * Use the guide to the right for placement of factory-installed 6paks Place the desired connector or adapter type (from guide above) above the corresponding location designation of 3A, 3B, 3C or 3D The diagram illustrates the location of each 6pak within the bulkhead A D B Door Side Accessories Cable clamp Compression fittings Bonding grounding kit Splice Tray with Chip Bare fusion Heat shrink fusion Mechanical (elastomeric) N None Wall-Mount Bulkhead Adapters with pigtails preinstalled into wall box (2.0 mm x 3.0 m) Adapters preinstalled into wall box Enter the desired quantity (0-9) above the corresponding accessory OR 6paks Installed into Wall Box (with or without Fiber)* Mounting Wall Side Viewed from Equipment Side Other connector and splice types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 73 FL1000 Fiber Termination Products 6pak Adapter Packs To add capacity to an existing FL1000 panel, simply order the appropriate 6pak 6paks without fiber 6paks with fiber Singlemode 6/04 • 1247379 MSO Market Solutions 6pak without fiber Catalog Number Singlemode Catalog Number SC Duplex SC FC SC (with zirconia sleeve) Duplex SC (with zirconia sleeve) FC (with zirconia sleeve) SC 8º Angled FC 8º Angled Duplex SC 8º Angled LX.5® FL2-6PSMSC FL2-6PSMDSC FL2-6PSMFC FL2-6PSMSC-Z SC Duplex SC FC SC (with zirconia sleeve) Duplex SC (with zirconia sleeve) FC (with zirconia sleeve) SC 8º Angled FC 8º Angled Duplex SC 8º Angled LX.5® FL1-6P7SC003 FL1-6PESC003 FL1-6P2SC003 FL1-6PRSC003 FL2-6PSMDSC-Z FL2-6PSMFC-Z FL2-6PSMASC FL2-6PSMAFC FL2-6PSMDASC FL2-6PSMLX FL1-6PCSC003 FL1-6PLSC003 FL1-6PJSC003 FL1-6PFSC003 FL1-6PBSC003 FL1-6PXBC003 6pak with fiber Accessories Ordering Information Description Catalog Number Compression fitting FL1-ACC001 Radius limiters (set of for use with rack-mount panels) Strength member tie-off kit NEMA box access tool Cable clamp Bonding grounding kit Lock and Key Type A Lock and Key Type B FL1-ACC002 FL1-ACC003 FL1-ACC004 FL2-ACC007 FL2-ACC006 IPA-K1 IPA-K2 Mini-splice tray (used only in 12-position, wall-mount box) Bare fusion Heat shrink fusion Mechanical (Elastomeric) FL1-M-FT FL1-M-HS FL1-M-MT Standard splice tray Bare fusion Heat shrink fusion Mechanical (Elastomeric) FST-FT FST-HS FST-MT www.adc.com • +1-952-938-8080 • 1-800-366-3891 74 FL2000 System Introduction MSO Market Solutions FL2000 Rack Mount Chassis FL2000 Rack Mount Chassis (door open) The economical and flexible FL2000 series of fiber optic products is ideal for small fiber counts and can be used in moderate fiber count applications as well by combining various panels This leading fiber optic panel is now available in black Features • Fully adaptable for large or small main distribution frame (MDF), intermediate distribution frame (IDF) or telephone closet (TC) applications • Designed for 19" (48.26 cm) EIA rack or cabinet environment found in many broadcast networks; optional brackets are available to accommodate 23" (58.42 cm) or ETSI rack or cabinet mounting • Provides termination, splicing and storage capabilities for in-building cables, outside plant cables and fiber optic terminal (FOT) equipment patch cords • Modular design offers maximum flexibility to satisfy both current needs and future growth requirements • FL2000 systems accommodate the Value-Added plug-in modules, adding flexibility and functionality to the optical transport systems Splitters, wavelength division multiplexers (WDMs) and other optical components can be easily incorporated • FL2000 panels and feature superior vertical cable protection and management • Rack mount panels are hinged on one side, allowing full access to the rear of the front plate and the interior of the panel • Rack mount panels are equipped with mounting brackets to provide 5" (12.7 cm) recess mounting; mounting brackets are available for virtually any mounting application • Rack mount panels can be wall mounted • The new FL2000 splice wheel allows easy roll-up of pigtail and buffer tube lengths and superior bend radius protection • The FL2000 splice deck is available to complete existing installations 6/04 • 1247379 • ADC’s patented removable angled retainers allow easy access for single fiber maintenance www.adc.com • +1-952-938-8080 • 1-800-366-3891 75 FL2000 System Rack or Cabinet Mount Termination/Splice Panels Preconfigured Panels with Pigtails 10.14" (25.76 cm) Features FL2000 panels can also be shipped with 6paks and/or pigtails pre-installed at the factory 19.60" (49.79 cm) 4.95" (12.58 cm) 5.25" (13.34 cm) 6/04 • 1247379 MSO Market Solutions PNT1 • Reduce installation time PNT1 • Simplify ordering process Use this configuration guide to determine the catalog number right for your application Catalog Number FL2 - Panel Type C Termination/Splice Number of Ports Loaded 10 11 Number of Splice Decks 12 Latch Type Black Nominal Capacity Panel Height A B D E F 12-position 24-position 48-position 72-position 96-position Putty Nominal Capacity 12-position 24-position 48-position 72-position 96-position 3.5" (8.89 cm) (2 RU) 5.25" (13.34 cm) (3 RU) 8.75" (22.23 cm) (5 RU) 14.0" (35.56 cm) (8 RU) 17.5" (44.45 cm) (10 RU) Pigtail or Adapter Type A P R K Adapters only 6-fiber softwall bundle 12-fiber ribbon 12-fiber softwall bundle Number of Cable Clamps Panel Height 3.5" (8.89 cm) (2U) 5.25" (13.34 cm) (3U) 8.75" (22.23 cm) (5U) 14.0" (35.56 cm) (8U) 17.5" (44.45 cm) (10U) Splice Type M W Connector Style Singlemode Ultra PCFC L FC with zirconia adapter F FC 8° angled polish Ultra PCSC N SC with zirconia adapter J SC 8° angled polish X LX.5® LC1 Latch Hole Plug Screwdriver K1 Lock K2 Lock clamp (standard) clamps Mounting Style2 None or N/A Mechanical (Wheel) Heat Shrink Fusion (Wheel) Bare Fusion (Deck) Heat Shrink Fusion (Deck) Mechanical (Deck) A B C D E 19" (48.26 cm) standard (19.6" [49.78 cm] overall) 19" (48.26 cm) maximum (19" [48.26 cm] overall) 19" (48.26 cm) flush mount 23" (58.42 cm) centered 23" (58.42 cm) with oversized VCG LX.5® and LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter Mounting kit shipped unattached if other than standard mounting style Other connector and splice types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 76 FL2000 System Rack or Cabinet Mount Termination Panels Preconfigured Panels with Pigtails MSO Market Solutions FL2000 panels can also be shipped with 6paks and/or pigtails pre-installed at the factory 1247379 • 4.95" (12.58 cm) 5.25" (13.34 cm) • Reduce installation time • Simplify ordering process Use this configuration guide to determine the catalog number right for your application Catalog Number FL2 - Panel Type R Termination only Black Nominal Capacity Panel Height A B C D E F 12-position 24-position 36-position 48-position 72-position 96-position 12-position 24-position 36-position 48-position 72-position 96-position 1.75" (4.45cm) (1 RU) 3.5" (8.89 cm) (2 RU) 5.25" (13.34 cm) (3 RU) 5.25" (13.34 cm) (3 RU) 8.75" (22.23 cm) (5 RU) 10.5" (26.67 cm) (6 RU) - 10 11 12 Pigtail or Adapter Type A P R K Adapters only 6-fiber softwall bundle 12-fiber ribbon 12-fiber softwall bundle Mounting Style2 A 1.75" (4.45cm) (1U) 3.5" (8.89 cm) (2U) 5.25" (13.34 cm) (3U) 5.25" (13.34 cm) (3U) 8.75" (22.23 cm) (5U) 10.5" (26.67 cm) (6U) Connector Style Singlemode Ultra PCFC L FC with zirconia adapter F FC 8° angled polish Ultra PCSC N SC with zirconia adapter J SC 8° angled polish X LX.5®1 LC1 Number of Ports Loaded Putty Nominal Capacity Panel Height 6/04 19.60" (49.79 cm) 10.14" (25.76 cm) Features B C D E 19" (48.26 cm) standard (19.6" [49.78 cm] overall) 19" (48.26 cm) maximum (19" [48.26 cm] overall) 19" (48.26 cm) flush mount 23" (58.42 cm) centered 23" (58.42 cm) with oversized VCG Latch Type Latch Hole Plug Screwdriver K1 Lock K2 Lock Number of Cable Clamps LX.5® and LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter Mounting kit shipped unattached, if other than standard mounting style clamp (standard) clamps Other connector and splice types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 77 FL2000 System Rack or Cabinet Mount Termination Panels Preconfigured Panels with Multifiber Cable Catalog Number 6/04 • 1247379 MSO Market Solutions 0 FL2 - - Panel Type S Singlemode M Multimode Latch Type Black Nominal Capacity Panel Height A B C D E F 12-position 24-position 36-position 48-position 72-position 96-position 1.75" (4.45cm) (1RU) 3.5" (8.89 cm) (2RU) 5.25" (13.34 cm) (3RU) 5.25" (13.34 cm) (3RU) 8.75" (22.23 cm) (5RU) 10.5" (26.67 cm) (6RU) 12-position 24-position 36-position 48-position 72-position 96-position A Up Down B C D E 19" (48.26 cm) standard (19.6" [49.78 cm] overall) 19" (48.26 cm) maximum (19" [48.26 cm] overall) 19" (48.26 cm) flush mount 23" (58.42 cm) centered 23" (58.42 cm) with oversized VCG Length in Meters XXX Cable Length (Meters) Ultra PCFC FC with zirconia adapter FC 8° angled polish Ultra PCSC SC with zirconia adapter SC 8° angled polish LX.5®1 LC1 Cable Type Singlemode IFC stranded A Plenum stranded F OSP single armor G Indoor-Outdoor H OSP dielectric J IFC stranded maxi-strip K M IFC ribbon Cable Size A Z Y X W U D 1.75" (4.45cm) (1RU) 3.5" (8.89 cm) (2RU) 5.25" (13.34 cm) (3RU) 5.25" (13.34 cm) (3RU) 8.75" (22.23 cm) (5RU) 10.5" (26.67 cm) (6RU) Connector Style Singlemode L F N J X Cable Exit Direction Mounting Style2 Putty Nominal Capacity Panel Height Standard Hole Plug Screwdriver K1 Lock K2 Lock 12 24 36 48 72 96 144 x 12 x 24 x 36 x 48 LX.5® and LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter Mounting kit shipped unattached, if other than standard mounting style Other connector and splice types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 78 FPL Series Fiber Panels Features • • • • • • • • • Available in 24, 48, 72, and 96 termination densities Panel may be ordered with adapters only for a termination-only interconnect solution Panel may be ordered with 3.5 m pigtails for use with splice and storage panels Rear panel pigtail storage Optional lock for both front and rear doors (available separately) Removable front polycarbonate door Designation labels included with each panel Mounting brackets included with panel can flip to accommodate 19" or 23" mounting and 4" or 5" recess Each panel includes cable clamps 1247379 MSO Market Solutions Termination Only 48-position 72-position 96-position 6/04 • 24-position www.adc.com • +1-952-938-8080 • 1-800-366-3891 89 FPL Series Fiber Panels Termination Only Catalog Number FPL- R – 0 Panel Height MSO Market Solutions Nominal Capacity 24 48 72 96 144 24-position 48-position 72-position 96-position 144-position 5.25" 8.75" 8.75" 8.75" 8.75" Ports Loaded 12 24 36 48 72 96 144 288 (3RU) (5RU) (5RU) (5RU) (5RU) Adapters and Pigtails A Adapters only P Stranded pigtails and adapters R Ribbon pigtails and adapters 12 24 36 48 72 96 144 288 Singlemode Connector Style (panel/stub) L F N J X Ultra PCFC FC with zirconia adapter FC 8º angled polish Ultra PCSC SC with zirconia adapter SC 8º angled polish LX.5®* LC* * LX.5® and LC are not available with standard pigtails (option P) in 96- or 144-position panels 6/04 • 1247379 Other connector types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 90 FPL Series Fiber Panels Termination with Intrafacility Fiber Cable 6/04 • 1247379 MSO Market Solutions Features • Available in 24, 48, 72, and 96 termination densities • Available with factory-installed multifiber intrafacility fiber cable (IFC) or OSP cable • Panels with multifiber cable attached ship as a single unit with cable clamp installed • Equipped with customer specified adapters, connectors, cable type and cable length • Attached multifiber cable reduces installation time and simplifies ordering process with a single part number • Optional lock for both front and rear doors (available separately) • Removable front polycarbonate door • Designation labels included with each panel • Mounting brackets included with panel may be flipped to accommodate 19" or 23" mounting and 4" or 5" recess 72-position with IFC Catalog Number FPL- / Nominal Capacity 24 48 72 96 144 24-position 48-position 72-position 96-position 144-position Dimensions Height 5.25" 8.75" 8.75" 8.75" 8.75" Cable Length XXX Length in meters (3RU) (5RU) (5RU) (5RU) (5RU) Cable Exit Direction U Up D Down Panel Type S Singlemode Cable Type Singlemode Connector Style (panel/stub) L F N J X Ultra PCFC FC with zirconia adapter FC 8º angled polish Ultra PCSC SC with zirconia adapter SC 8º angled polish LX.5®* LC* * 96- and 144-position panels using LX.5® or LC connector styles must use cable size option H (2 x 144) Cable A Z Y X W U T N E F H A F G H J K M L T Size 12 24 36 48 72 96 144 2x12 2x24 2x36 2x48 2x72 4x24 2x96 3x24 4x12 2x144 IFC stranded IFC plenum stranded OSP single armor stranded Indoor-outdoor OSP dielectric stranded IFC maxistrip IFC ribbon OSP single armor ribbon OSP dielectric ribbon Other connector types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 91 FPL Series Fiber Panels Termination and Splice Features MSO Market Solutions Front View Rear View Splice Tray Type Number of Splice Trays Included for a Fully Loaded Panel • Top Cover Removed with Pigtail Routing Shown 24 Single Height 6/04 1247379 • Available in 24, 48, 72, and 96 termination densities • Provides termination and splice of pigtails as well as associated fiber/pigtail storage • Rear splice area saves space by reducing panel height • ADC recommends completely splicing all OSP/IFC cables during initial installation to maintain minimal disturbance of the interior of the panel • Splice area provides up to a total of meters of slack storage for pigtails and OSP/IFC buffer tubes • Optional lock for both front and rear doors (available separately) • Removable front polycarbonate door • Designation labels included with each panel • Mounting brackets included with panel may be flipped to accommodate 19" or 23" mounting and 4" or 5" recess • Each panel includes cable clamps 48 Dual Height 72 Dual Height 96 Dual Height Panel Size www.adc.com • +1-952-938-8080 • 1-800-366-3891 92 FPL Series Fiber Panels Termination and Splice Catalog Number FPL- R - MSO Market Solutions Nominal Capacity 24 48 72 96 24-position 48-position 72-position 96-position Dimensions Height 5.25" 8.75" 8.75" 8.75" Splice Type None or N/A Bare fusion Heat shrink fusion Mechanical (3RU) (5RU) (5RU) (5RU) Adapters/Pigtails P Stranded pigtails and adapters R Ribbon pigtails and adapters Number of Pigtailed Terminations 12 12 24 24 48 48 72 72 96 96 144 144 Singlemode Connector Style (panel/stub) L F N J X Ultra PCFC FC with zirconia adapter FC 8º angled polish Ultra PCSC SC with zirconia adapter SC 8º angled polish LX.5®* LC* * LX.5® and LC are not available in 96-position panel 6/04 • 1247379 Other connector types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 93 FPL Series Fiber Panels 144-Position High Density FPL Termination and Splice MSO Market Solutions Features • Provides termination and splicing for up to 144 fibers within 8.75" height (5 RU) • Rear flip-down splicing area uses standard splice trays and provides slack storage of OSP/IFC buffer tubes • Angled bulkhead ensures ease of access to individual connectors • Panel is equipped with dual height splice trays • Optional lock for front door (available separately) • Removable front polycarbonate door • Designation labels included with each panel • Mounting brackets included with panel may be flipped to accommodate 19" or 23" mounting and 4" or 5" recess • Each panel includes cable clamps • Panel available with pigtails only • Maximum of three panels to be used within one rack, for a total of 432 terminations Top Cover Removed With Splicing Area Open 8.75” 15” Side View Splicing Area Closed 1247379 8.75” 13” 23.19” Side View Splicing Area Open Catalog Number 6/04 • FPL-144 R – Pigtails P Stranded pigtails and adapters R Ribbon pigtails and adapters Singlemode Connector Style (panel/stub) L F N J X Ultra PCFC FC with zirconia adapter FC 8º angled polish Ultra PCSC SC with zirconia adapter SC 8º angled polish LC1 LX.51 Splice Type None or N/A Bare fusion Heat shrink fusion Mechanical Number of Pigtailed Terminations 72 72 144 144 288 2882 LC and LX.5 available with ribbon pigtails only Only for LC and LX.5 Other connector types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 94 FPL Series Fiber Panels 11.98 11.98 REF Mounting Options for FPL PanelsREF 5.00 REF 5.00 REF The following mounting bracket options are available with all FPL panels except the single-drawer storage panels: (Vertical cable guides removed to show mounting brackets.) 23" 22.32" 5.15" 5.15" 23" Mounting 19" Mounting Mounting brackets may be flipped to provide either 19" or 23" mounting RACK 4" Recess 5" Recess Mounting brackets may be adjusted for 4" or 5" recess mounting 6/04 • 1247379 MSO Market Solutions 19" 18.32" www.adc.com • +1-952-938-8080 • 1-800-366-3891 95 Fiber Management Tray System Overview Four separate FMT configurations are available to meet your specific application 6/04 Secure Cable to Rack Termination and Storage Panels: Similar to the termination only panels this FMT will accommodate terminations in groups of 12, 16 or 24 This panel is distinguished from the termination only unit by its ability to store slack fiber for the line and/or equipment side of the demarcation It’s an ideal solution for interconnect applications that may see some reconfiguration activity and where exact patch cord lengths cannot be determined Slack storage within the panel also allows for reconnectorization of the fiber, should the need arise Care should be taken when ordering this panel to assure that the bulk slack storage is being ordered for the correct side of the panel Route Cable into FMT Through Trumpet Flare Termination and Splice Panels: The FMT termination and splice solution offers the capacity to terminate and splice 12, 16 or 24 fibers within RU Placement of the splice tray is available for both the left and right side of the tray, offering you great flexibility in ordering the panel to fit your specific network application It is recommended that this panel be ordered factory equipped with fiber dressed from the adapters to the splice area Slack Storage Panels: These panels perform the important task of properly managing and protecting excess optical jumper length at the equipment bay These panels may be used in conjunction with other FMT solutions or as standalone slack storage solution at the equipment bay Both bulk and discrete storage solutions are available for individual 1.7, 2.0 and 3.0 mm jumpers Tie Lances (2 on Each Side) Left Rear Radius Limiter Storage Radius Limiters Right Rear Radius Limiter • 1247379 MSO Market Solutions Termination Only Panels: This style FMT will accommodate 24 or 32 of today’s standard single circuit access connectors It is ideal for interconnect applications that will see a minimal amount of network reconfiguration Edge Protectors (6) Sliding Adapter Packs Mounting Bracket (2) Lock (optional) Sliding Radius Trumpet Flare (2) 12-Termination/Storage Tray, Universal Entry www.adc.com • • Sliding Adapter Packs - Each with two adapter/connectors provide easy hand access for connecting cables and cleaning connectors • Edge Protectors - Protect cables from sharp angles at bend points in the cable physical route • Rear Radius Limiters - Maintain a protective minimum bend radius for cables routed into panel • Tie Lances - Secure fibers at the ingress/egress point for additional cable management • Storage Radius Limiters - Provide slack storage for cable terminated within the panel • Mounting Brackets - Factory-installed per customer order, adapt the tray for different mounting options including the following: -19- or 23-inch reversible EIA or WECO mounting with a 5-inch, 2.2-inch or 40 mm recess -ETSI mounting with a 40 mm recess • Sliding Radius Trumpet Flare - Provides a continuous bend radius protection while opening and closing the drawer • Lockable - Further ensuring the integrity of the fibers by greatly reducing the chance for accidents +1-952-938-8080 • 1-800-366-3891 96 Fiber Management Tray Applications • Provides slack storage in or next to FOT equipment bays • Allows standard length jumpers to connect to network elements • Adds storage 1RU at a time • Bulk slack storage provides fast and easy initial installation and storage for equipment jumpers • High-density (1.6 mm to mm fibers) (60 to 32 fibers) • Discrete slack storage provides highly accessible, highly organized slack storage for equipment jumpers • Individual slack storage trays (16 in RU) ensure slack fibers can be easily and quickly identified and removed when changes are needed 6/04 • 1247379 MSO Market Solutions Slack Storage www.adc.com • +1-952-938-8080 • 1-800-366-3891 97 Fiber Management Tray Applications • Provides interconnection and slack storage in or next to FOT equipment bays • Provides fast and easy initial installation and storage for equipment jumpers • Allows standard length and style of jumpers to connect to network elements • Adds 1RU at a time • Allows for variable density/slack storage requirements (12-24 fibers) • Slack storage spools can also be used for storing multifiber cable breakouts, allowing fewer cables to be run between pieces of equipment 6/04 • 1247379 MSO Market Solutions Termination/Storage www.adc.com • +1-952-938-8080 • 1-800-366-3891 98 Fiber Management Tray Termination Only 32-Termination Only 24-Termination Only Catalog Number FMT-D 0A0 - Faceplate Color B Black P Putty Drawer Configuration RT Termination only Connector/Adapter Style Singlemode F J L N Number of Ports 24 32 Ultra PCFC Ultra PCSC FC 8° angled polish SC 8° angled polish FC with zirconia adapter SC with zirconia adapter Mounting Style A 19" EIA 5" recess C 19" EIA 2.2" recess E 19" EIA 40 mm recess F ETSI 40 mm recess S 23" WECO 2.2" recess 1247379 MSO Market Solutions The termination only Fiber Management Tray provides termination for 24 or 32 fibers in an all-front-access design This tray mounts in 19-inch, 23-inch, or ETSI racks, while sliding radius limiters provide cable management for incoming and outgoing fibers 6/04 • Lock Type No lock Lock, key type Lock, key type Other connector types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 99 Fiber Management Tray Termination and Splice 6/04 • 1247379 MSO Market Solutions The termination and splice Fiber Management Tray accommodates 12, 16, or 24 fibers in an all-front-access design This tray mounts in 19-inch, 23-inch, or ETSI racks, while sliding radius limiters provide cable management for incoming and outgoing fibers Panels loaded with pigtails come with 900 micron pigtails, color coded with different colors 12-Termination/Splice (right splice entry) 24-Termination/Splice (left splice entry) 24-Termination/Splice (right splice entry) 12-Termination/Splice (right splice entry) 24-Termination/Splice (right splice entry) Catalog Number FMT - D - Faceplate Color B Black P Putty Configuration TL Termination/splice with splice tray (left splice entry) TR Termination/splice with splice tray (right splice entry) Number of Ports 12 16 24 Connector/Adapter Style Singlemode F J L N Mounting Style A 19" EIA 5" recess C 19" EIA 2.2" recess E 19" EIA 40 mm recess F ETSI 40 mm recess S 23" WECO 2.2" recess Ultra PCFC Ultra PCSC FC 8° angled polish SC 8° angled polish FC with zirconia adapter SC with zirconia adapter Lock Cable or Adapter Type A Adapters only U Singlemode maxistrip pigtails Type No lock Lock, key type Lock, key type Chip Style (mini splice tray) N/A Heat shrink Mechanical Other connector types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 100 Fiber Management Tray Termination and Storage 12-Termination/Storage (universal storage) 16-Termination/Storage (universal storage) 24-Termination/Storage (right storage) 24-Termination/Storage (left storage) 12-Termination/Storage (universal storage) Catalog Number FMT-D 0A0 - Faceplate Color B Black P Putty Configuration SL Termination/storage (left storage) SR Termination/storage (right storage) ST Termination/storage (universal storage) Number of Ports 12 Available with ST configuration only 16 Available with ST configuration only 24 Available with SR and SL configurations only Connector/Adapter Style Singlemode F J L N Ultra PCFC Ultra PCSC FC 8° angled polish SC 8° angled polish FC with zirconia adapter SC with zirconia adapter Mounting Style A 19" EIA 5" recess C 19" EIA 2.2" recess E 19" EIA 40 mm recess F ETSI 40 mm recess S 23" WECO 2.2" recess 6/04 • 1247379 MSO Market Solutions The termination and storage tray terminates and stores 12, 16, or 24 fibers in an all-front-access design This tray mounts in 19-inch, 23-inch, or ETSI racks, while sliding radius limiters provide cable management for incoming and outgoing fibers Lock Type No lock Lock, key type Lock, key type Other connector types are available Please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 101 Fiber Management Tray Slack Storage The slack storage tray offers bulk storage for up to 60 fibers, and discrete slack storage for up to 16 fibers This all-front-access tray mounts in 19-inch, 23-inch, or ETSI racks, while sliding radius limiters provide cable management for incoming and outgoing fibers MSO Market Solutions Bulk/Storage Drawer Discrete/Storage Drawer Capacity • 6/04 mm cable mm cable 1.7 mm cable Bulk 1247379 Slack storage type 32 cables, 2.5 m each 48 cables, 2.5 m each 60 cables, m each Discrete 16 cables, 1.7 m each 16 cables, m each 16 cables, 2.5 m each Catalog Number FMT - D 0 00 - 00 Drawer Configuration BS Bulk storage DS Discrete storage Faceplate Color B Black P Putty Lock Mounting Style A 19" EIA 5" recess C 19" EIA 50 mm recess E 19" EIA 40 mm recess F ETSI 40 mm recess S 23" WECO 2.2" recess Type No lock Lock, key type Lock, key type www.adc.com • +1-952-938-8080 • 1-800-366-3891 102 Fiber Management Tray Specifications MSO Market Solutions PHYSICAL Approximate Weight: Configuration Options and Capacity: lbs (3.7 kg) Termination only (24 or 32 fibers) Termination/storage (12, 16, or 24 terminations) Bulk Storage mm outer diameter cable: 32 cables, length 2.5 m each mm outer diameter cable: 48 cables, length 2.5 m each 1.7 mm outer diameter cable: 60 cables, length m each Discrete storage mm outer diameter cable: 16 cables, length 1.7 m each mm outer diameter cable: 16 cables, length m each 1.7 mm outer diameter cable: 16 cables, length 2.5 m each Termination/splicing (12, 16, or 24 splices) 17.39" (44.2 cm) 11.01" (27.96 cm) C Top View 1.71" (4.34 cm) B A Available Mounting Styles A B C 19" EIA (2.2" recess) 18.31" (46.5 cm) 1.25" (3.2 cm) 2.25" (5.7 cm) 19" EIA (40 mm recess) 18.31" (46.5 cm) 1.25" (3.2 cm) 1.54" (3.9 cm) 19" EIA (5" recess) 18.31" (46.5 cm) 1.25" (3.2 cm) 5.0" (12.7 cm) • Configuration ETSI (40 mm recess) 20.28" (51.5 cm) 0.98" (2.5 cm) 1.54" (3.9 cm) 6/04 1247379 Front View 23" WECO (2.2" recess) 22.31" (56.7 cm) 1.0" (2.5 cm) 2.25" (5.7 cm) 23" WECO (5" recess) 22.31" (56.7 cm) 1.0" (2.5 cm) 5.0" (12.7 cm) 23" EIA (2.2" recess) 22.31" (56.7 cm) 1.25" (3.2 cm) 2.25" (5.7 cm) 23" EIA (5" recess) 22.31" (56.7 cm) 1.25" (3.2 cm) 5.0" (12.7 cm) www.adc.com • +1-952-938-8080 • 1-800-366-3891 103 ... flexible FL2000 series of fiber optic products is ideal for small fiber counts and can be used in moderate fiber count applications as well by combining various panels This leading fiber optic panel... Series Fiber Panels 11.98 11.98 REF Mounting Options for FPL PanelsREF 5.00 REF 5.00 REF The following mounting bracket options are available with all FPL panels except the single-drawer storage panels: ... termination densities • Available with factory-installed multifiber intrafacility fiber cable (IFC) or OSP cable • Panels with multifiber cable attached ship as a single unit with cable clamp installed