Tài liệu Fiber Optic Cable Simplex and Duplex Loose Tube Cables docx

Fiber Optic Cable Simplex and Duplex Loose Tube Cables SPEC SHEET www.adc.com • +1-952-938-8080 • 1-800-366-3891 ADC's loose tube simplex and duplex cables provide factory standard guaranteed performance specifications. They are 100% optically tested and are offered with a variety of optical performance levels. Features: • Extremely light weight • Exstremely small outer diameter • UV stabilized polyethylene jacket • Easier to install than conventional loose tube cables • Eliminates the need for large cable trailers Applications: • Crowded ducts • Along or inside chain link fencing • Small conduit 10/05 • 101464 Simplex & Duplex Loose Tube Cables Fiber Optic Cable Simplex and Duplex Loose Tube Cables 2 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Environmental Characteristics: Storage Temperature -40˚ to 85 ˚C (-67˚ to 185 ˚F) Operating Temperature -40˚ to 70 ˚C (-40˚ to 158 ˚F) Installation Temperature -20˚ to 70 ˚C (-40˚ to 158 ˚F) Specifications Mechanical Characteristics: Test Procedure Units Results Crush Resistance EIA-FOTP-41A N/cm 900 Impact Resistance EIA-FOTP-25B # of impacts 100 Flexing (# of Cycles) EIA-FOTP-104A # of cycles 1,000 Maximum Pulling Load EIA-FOTP-33A N (lb) 400 (112) Maximum Operating Load EIA-FOTP-33A N (lb) 100 (67) Maximum Vertical Rise EIA-FOTP-33A m (ft) 30 (98) Min. Bend Radius @ Max Load EIA-FOTP-33A cm (in) 8.4 (3.3) 2 Fiber Cable Polyurethane Outer Jacket 4.2 mm Gel Filled Loose Tube Aramid Yarn Strength Member 245 Acrylate Coated Fiber 10/05 • 101464 Simplex & Duplex Loose Tube Cables Fiber Optic Cable Simplex and Duplex Loose Tube Cables 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Construction Characteristics: Strand Count Cable Diameter mm in 1 Fiber 4.2 0.165 2 Fiber 4.2 0.165 Optical Performance: Multimode Fiber Maximum Attenuation @ 850/1300 nm Typical Attenuation @ 850/1300 nm Minimum Bandwidth @ 850/1300 nm Core Diameter (µm) Clad Diameter (µm) Coat Diameter (µm) Numerical Aperture 50/125 3.5/1.5 2.6/0.6 500/500 50 ± 3 125 ± 2 500 ± 25 0.200 ± 0.015 62.5/25 3.5/1.5 2.7/0.8 200/500 62.5 ± 3 125 ± 2 245 ± 10 0.275 ± 0.015 100/140 6.0/3.0 4.5/2.0 100/100 100 ± 3 140 ± 4 500 ± 25 0.290 ± 0.020 200/230 7.0/15.0 5.0/12 20/30 200 ± 5 230 ± 10 500 ± 30 0.39 ± 0.020 Singlemode Fiber @ 1310/1550 nm @ 1310/1550 nm Mode Field Diameter (µm) @ 1310 nm @ 1550 nm 1.0/1.0 0.35/0.25 9.2 ± 0.4 10.4 ± 0.8 125 ± 1 245 ± 10 0.14 ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 101464 10/05 Original © 2005 ADC Telecommunications, Inc. All Rights Reserved Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site. SPEC SHEET *Replace XXX with Fiber Type below: XXX = Fiber Type 010 = Singlemode 062 = 62.5/125/245 µm Multimode 62E = 62.5/125/245 µm Enhanced Multimode 050 = 50/125/245 µm Multimode 50E = 50/125/245 µm Enhanced Multimode 50U = 50/125/245 µm Ultra Multimode for 300 m 10G bps 5U5 = 50/125/245 µm Ultra Multimode for 550 m 10G bps 100 = 100/140/500 µm Multimode 200 = 200/230/500 µm Multimode Ordering Information Description Diameter Catalog Number* mm in Simplex 4.2 0.165 0001LTDSFH XXX Duplex 4.2 0.165 0002LTDDUP XXX . fencing • Small conduit 10/05 • 101464 Simplex & Duplex Loose Tube Cables Fiber Optic Cable Simplex and Duplex Loose Tube Cables 2 www.adc.com • +1-952-938-8080. Fiber Optic Cable Simplex and Duplex Loose Tube Cables SPEC SHEET www.adc.com • +1-952-938-8080 • 1-800-366-3891 ADC's loose tube simplex and duplex