Mastering autodesk inventor 2014
Mastering Autodesk ® Inventor ® 2014 and Autodesk ® Inventor LT ™ 2014 Mastering Autodesk ® Inventor ® 2014 and Autodesk ® Inventor LT ™ 2014 Curtis Waguespack Senior Acquisitions Editor: Willem Knibbe Development Editor: Jim Compton Technical Editor: Luke Larue Production Editor: Dassi Zeidel Copy Editor: Linda Recktenwald Editorial Manager: Pete Gaughan Production Manager: Tim Tate Vice President and Executive Group Publisher: Richard Swadley Vice President and Publisher: Neil Edde Book Designers: Maureen Forys, Happenstance Type-O-Rama; Judy Fung Proofreader: James Saturnio, Word One New York Indexer: Ted Laux Project Coordinator, Cover: Katherine Crocker Cover Designer: Ryan Sneed Cover Image: Curtis Waguespack Copyright © 2013 by John Wiley & Sons, Inc., Indianapolis, Indiana Published simultaneously in Canada ISBN: 978-1-118-54486-0 ISBN: 978-1-118-75810-6 (ebk.) ISBN: 978-1-118-75828-1 (ebk.) No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechan- ical, photocopying, recording, scanning or otherwise, except as permitted under Sections 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 646-8600. Requests to the Publisher for per- mission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, or online at http://www.wiley.com/go/permissions. Limit of Liability/Disclaimer of Warranty: The publisher and the author make no representations or warranties with respect to the accuracy or completeness of the contents of this work and speci cally disclaim all warranties, including without limitation warranties of tness for a particular purpose. No warranty may be created or extended by sales or promotional materials. The advice and strategies contained herein may not be suitable for every situation. This work is sold with the understanding that the publisher is not engaged in rendering legal, accounting, or other professional services. If professional assistance is required, the services of a competent professional person should be sought. Neither the publisher nor the author shall be liable for damages arising herefrom. The fact that an organization or Web site is referred to in this work as a citation and/or a potential source of further information does not mean that the author or the publisher endorses the information the organization or Web site may provide or recommendations it may make. Further, readers should be aware that Internet Web sites listed in this work may have changed or disappeared between when this work was written and when it is read. For general information on our other products and services or to obtain technical support, please contact our Customer Care Department within the U.S. at (877) 762-2974, outside the U.S. at (317) 572-3993 or fax (317) 572-4002. Wiley publishes in a variety of print and electronic formats and by print-on-demand. Some material included with standard print versions of this book may not be included in e-books or in print-on-demand. If this book refers to media such as a CD or DVD that is not included in the version you purchased, you may download this material at http://booksupport.wiley.com. For more information about Wiley prod- ucts, visit www.wiley.com. Library of Congress Control Number: 2013934764 TRADEMARKS: Wiley, the Wiley logo, and the Sybex logo are trademarks or registered trademarks of John Wiley & Sons, Inc. and/or its af liates, in the United States and other countries, and may not be used without written permission. Autodesk, Inventor, and Inventor LT are trademarks or registered trademarks of Autodesk, Inc. All other trademarks are the property of their respective owners. John Wiley & Sons, Inc. is not associated with any product or vendor mentioned in this book. 10 9 8 7 6 5 4 3 2 1 Dear Reader, Thank you for choosing Mastering Autodesk Inventor 2014 and Autodesk Inventor LT 2014. This book is part of a family of premium-quality Sybex books, all of which are written by outstand- ing authors who combine practical experience with a gift for teaching. Sybex was founded in 1976. More than 30 years later, we’re still committed to producing consis- tently exceptional books. With each of our titles, we’re working hard to set a new standard for the industry. From the paper we print on, to the authors we work with, our goal is to bring you the best books available. I hope you see all that re ected in these pages. I’d be very interested to hear your comments and get your feedback on how we’re doing. Feel free to let me know what you think about this or any other Sybex book by sending me an email at nedde@wiley.com. If you think you’ve found a technical error in this book, please visit http://sybex.custhelp.com. Customer feedback is critical to our efforts at Sybex. Best regards, Neil Edde Vice President and Publisher Sybex, an Imprint of Wiley To Jennifer for all of the love, support, and encouragement. Acknowledgments This book is a collaborative effort involving many more people than those listed on the cover. Personally, I would like to thank my family, whose patience and understanding made this, and all other pursuits, possible. Professionally, I would like to thank the coworkers, clients, custom- ers, and friends whose input and ideas have helped build the knowledge and experience that I draw from in applying concept to practice. I would like to thank Lucas Larue for the outstanding work he performed as technical edi- tor as well as the many tips and tricks he’s contributed to this book and my overall knowledge of Autodesk ® Inventor ® software. A special thank you goes out to those who have contributed content to the Mastering Inventor series in the past: Thom Tremblay, Sean Dotson, Bill Bogan, Andrew Faix, Seth Hindman, Loren Jahraus, Shekar Subrahmanyam, Bob Van der Donck, and the late Dennis Jeffrey, all of whom are true masters of Autodesk Inventor. Thank you to the team at Wiley—Jim Compton, Dassi Zeidel, Linda Recktenwald, James Saturnio, Connor O’Brien, Willem Knibbe, and Pete Gaughan—for their patience, focus, and professionalism, without which there would be no book. Your hard work and support always ease the effort of turning ideas into pages. . Mastering Autodesk ® Inventor ® 2014 and Autodesk ® Inventor LT ™ 2014 Mastering Autodesk ® Inventor ® 2014 and Autodesk ® Inventor LT ™ 2014 Curtis. 5 4 3 2 1 Dear Reader, Thank you for choosing Mastering Autodesk Inventor 2014 and Autodesk Inventor LT 2014. This book is part of a family of premium-quality