Work Station Media Converters ADC’s solution for media conversion at the work area is simple, uncluttered and cost-effective. Traditional solutions typically consist of an outlet optical interface, fiber jumper for connection to the media converter, a media converter on floor or desk, and a power supply that plugs in to a wall outlet. Unlike the cluttered approach, the ADC work area solution consists of two simple components: • An integrated media converter with conversion circuitry behind the faceplate. Tx and Rx fiber cables connect on the rear of the media converter – behind the faceplate and protected from the office environment – and RJ45 station cord for the NIC connects on the front. Each single port media converter fits into any 6000 Multimedia Outlet with a 2-port opening. Built-in intelligence for optical link integrity and UTP link integrity indicators at the work area streamline installation, troubleshooting, and maintenance. In addition, installation is simple because there are no DIP or crossover switches to adjust. • Local power supply through a compact power adapter that mounts behind the PC or on the desk, obtaining power through a standard PS/2 mouse interface with a RJ45 patch cord. The media converter can also be powered through the USB port of the PC by means of a simple patch cord or through a conventional AC/DC wall outlet power adapter. With ADC media converters, there is no jumble of components at the desktop – just a simple and logical approach to work area media conversion. And media conversion is just one part of the complete line of ADC work area solutions that provide one work area platform for all outlet requirements, including modular jacks and media adapters for fiber, coax, RCA and S-Video applications. Why media conversion? • Protect network investment. By using media conversion at wall outlets, the useful life of active copper electronics is greatly extended. • Deliver bandwidth where it is needed. Fiber is not an “all-or-nothing” proposition. With media conversion, more bandwidth can be delivered economically to individual workstations. • Extend distances. Media conversion extends distances between hubs, switches and fileservers up to 300 meters while greatly increasing the maximum channel length for remote workstations. • Reduce cost of network upgrades. With copper port switch technology a fraction of the cost of optical switch technology, media conversion provides an incremental approach to providing increased bandwidth without upgrading active electronics or purchasing repeaters. OptEnet ™ Media Converters 4/04 • 100349 Data Connectivity 2 www.adc.com • +1-952-938-8080 • 1-800-366-3891 OptEnet ™ Media Converters Work Area Media Conversion Media converter shown with modular jacks in faceplate. Power adapter mounts behind PC or on the desk and provides power to media converter through the mouse port. Front view of media converter shows convenient front location of indicators for UTP and optical link integrity. Workstation Mouse Power Adapter Wall Media Converter Features • Reduces work area clutter by placing media conversion circuitry behind the faceplate • Eliminates external power adapter and fiber jumper in workstation applications • Improves protection of circuits by securing circuitry behind the faceplate • Streamlines installation and troubleshooting with built-in intelligence for optical link integrity and UTP link integrity indicators at work area • Supports 10Base-T and 100Base-TX UTP and 10Base-FL, 100Base-SX, and 100Base-FX multimode fiber with auto negotiation 3 4/04 • 100349 Data Connectivity www.adc.com • +1-952-938-8080 • 1-800-366-3891 OptEnet ™ Media Converters – Work Area Applications and Powering Options 10/100 Ethernet Hub or Switch OptEnet™ Platform 10/100 Wall Outlet Ethernet Media Converter Power Adapter RJ45 Patch Cable Multimode Fiber Up To 300m PC Work Station PS/2 Mouse RJ-45 Patch Cable DIN Cable PS/2 Mouse Port (DIN Interface) 10/100 Ethernet Port (RJ-45 Interface) 10/100 Ethernet OPTICAL Hub or Switch 10/100 Wall Outlet Ethernet Media Converter Power Adapter 100BASE-SX Ports 850-nm Multimode Fiber Up To 300m PC Work Station PS/2 Mouse RJ-45 Patch Cable DIN Cable PS/2 Mouse Port (DIN Interface) 10/100 Ethernet Port (RJ-45 Interface) 10/100 Ethernet Hub or Switch OptEnet™ Platform 10/100 Wall Outlet Ethernet Media Converter Power Adapter RJ45 Patch Cable Multimode Fiber Up To 300m PC Work Station WALL ADAPTER RJ-45 Patch Cable 10/100 Ethernet Port (RJ-45 Interface) AC Input +5VDC Either DIN Port Can Be Used Configuration for Network Printers and Other Devices that Cannot Provide Power to the Media Converter. 10/100 Ethernet OPTICAL Hub or Switch 10/100 Wall Outlet Ethernet Media Converter 100BASE-SX Ports 850-nm Multimode Fiber Up To 300m PC Work Station Custom Patch Cable USB Port 10/100 Ethernet Port (RJ-45 Interface) Ideal Configuration for LapTop Computers No EtherPower Adapter Required Wall Outlet Power Option USB Port Power Option Mouse Port Power Option ADC’s work station media converters compliment the ADC OptEnet ™ optical extension platform. Positioned in the data center, the OptEnet ™ platform can extend the 10 Mb/s, 100 Mb/s, 1000 Mb/s signal to the work station. OptEnet ™ Media Converters Work Area Media Converter Kits Mouse port power option 850nm ADC6S1SXSTMM1XX* 1300nm ADC6S1FXSTMM1XX* Kit includes media converter, power adapter, 3' PS/2 jumper, and 3' blue RJ45 patch cord Wall outlet power option 850nm ADC6S1SXSTMM2XX* 1300nm ADC6S1FXSTMM2XX* Kit includes media converter, power adapter, AC/DC wall outlet power adapter, and 3' blue RJ45 patch cord USB port power option 850nm ADC6S1SXSTMM3XXYY** 1300nm ADC6S1FXSTMM3XXYY** Kit includes media converter and USB patch cord Accessories RJ45 patch cord, Category 5e with boots Work area – for optional station cable Rack mount – for connecting to power supply White ADCPC-RRC6B-WTZZ*** Gray ADCPC-RRC6B-GYZZ*** Blue ADCPC-RRC6B-BLZZ*** Description Catalog Number Ordering Information All work area media converters have ST® optical connectors Ordering notes: * Replace XX in catalog number with choice of color for media converter below ** To order USB port power cable, replace YY in catalog number with desired length in meters: 02, 05, 07, or 10. Replace XX in catalog number with choice of color for media converter *** To order optional RJ45 station cable, replace ZZ in catalog number with the desired length in feet: 03, 05, 07, 10, 15, 20, 25, or 50. Custom colors and lengths available. 02 = Black 00 = Electrical Ivory 01 = Office White ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 100349 4/04 Revision © 2002, 2004 ADC Telecommunications, Inc. All Rights Reserved Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 For a complete listing of ADC’s global sales office locations, please refer to our web site. . Work Station Media Converters ADC’s solution for media conversion at the work area is simple, uncluttered and cost-effective OptEnet ™ Media Converters 4/04 • 100349 Data Connectivity 2 www.adc.com • +1-952-938-8080 • 1-800-366-3891 OptEnet ™ Media Converters Work Area Media Conversion