1 Black Belt in Origami Diagrammed by R.Glynn © February 1999 2 3 Preliminary fold 4 5 6 Pull out the loose paper (it helps if you unfold to step 4 first) 7 Fold the point up inside the model (you need to pull the model apart to do this) 8 This is the half way stage 9 10 11 12 13 Repeat steps 3-8 on this side 14 15 16 Fold the point up inside the model (much harder than step 7!) 17 18 19 See step 20 20 Swivel the point to the left Line shown in step 18 Black Belt in Origami Diagrammed by R.Glynn © February 1999 21 Tuck inside 22 Repeat steps 20-21 on the right 23 24 Closed sinks 26 Crimp 25 Wrap the double layer from behind to the front 27 28 29 Sqash to form feet 30 Tuck into pockets behind 31 Crimp 32 Release trapped paper from behind 33 Mountain fold shoulders, neck and head simultaneously 34 35 36 37 . 1 Black Belt in Origami Diagrammed by R.Glynn © February 1999 2 3 Preliminary fold 4. 19 See step 20 20 Swivel the point to the left Line shown in step 18 Black Belt in Origami Diagrammed by R.Glynn © February 1999 21 Tuck inside 22 Repeat