| Tài liệu tham khảo |
Loại |
Chi tiết |
| 1. AASHTO (2010). AASHTO LRFD Bridge Design Specifications , 5th Edition, American Association of State Highway and Transportation Officials, Washington, DC |
Sách, tạp chí |
| Tiêu đề: |
AASHTO LRFD Bridge Design Specifications |
| Tác giả: |
AASHTO |
| Năm: |
2010 |
|
| 2. Kulicki, J., Wassef, W., Smith, C, and Johns, K., (2005). “AASHTO-LRFD Design Example: Horizontally Curved Steel Box Girder Bridge, Final Report,” National Cooperative Highway Research Project 12-52, Transportation Research Board, Washington, D.C |
Sách, tạp chí |
| Tiêu đề: |
AASHTO-LRFD Design Example: Horizontally Curved Steel Box Girder Bridge, Final Report |
| Tác giả: |
Kulicki, J., Wassef, W., Smith, C, and Johns, K |
| Năm: |
2005 |
|
| 3. Wright, R.N. and Abdel-Samad, S.R., (1968). “BEF Analogy for Analysis of Box Girders,” Journal of the Structural Division, ASCE, Vol. 94, No. ST7 |
Sách, tạp chí |
| Tiêu đề: |
BEF Analogy for Analysis of Box Girders |
| Tác giả: |
Wright, R.N. and Abdel-Samad, S.R |
| Năm: |
1968 |
|
| 4. Coletti, D.A., Fan, Z., Holt, J., Vogel, J., Gatti, W., (2005). Practical Steel Tub Girder Design , National Steel Bridge Alliance (NSBA) |
Sách, tạp chí |
| Tiêu đề: |
Practical Steel Tub Girder Design |
| Tác giả: |
Coletti, D.A., Fan, Z., Holt, J., Vogel, J., Gatti, W |
| Năm: |
2005 |
|
| 5. AASHTO/NSBA, (2006). G1.4-2006: Guidelines for Design Details , AASHTO/NSBA Steel Bridge Collaboration |
Sách, tạp chí |
| Tiêu đề: |
G1.4-2006: Guidelines for Design Details |
| Tác giả: |
AASHTO/NSBA |
| Năm: |
2006 |
|
| 6. Texas Department of Transportation (TxDOT), (2009). Preferred Practices for Steel Bridge Design, Fabrication, and Erection , Texas Steel Quality Council |
Sách, tạp chí |
| Tiêu đề: |
Preferred Practices for Steel Bridge Design, Fabrication, and Erection |
| Tác giả: |
Texas Department of Transportation (TxDOT) |
| Năm: |
2009 |
|
| 7. AASHTO/NSBA, (2003). G12.1-2003: Guidelines for Design for Constructibility , AASHTO/NSBA Steel Bridge Collaboration |
Sách, tạp chí |
| Tiêu đề: |
G12.1-2003: Guidelines for Design for Constructibility |
| Tác giả: |
AASHTO/NSBA |
| Năm: |
2003 |
|
| 8. Fan, Z. and Helwig, T., (1999). “Behavior of Steel Box Girders with Top Flange Bracing,” Journal of Structural Engineering, ASCE, Vol. 125, No. 8, pp. 829-837 |
Sách, tạp chí |
| Tiêu đề: |
Behavior of Steel Box Girders with Top Flange Bracing,” "Journal of Structural Engineering, ASCE |
| Tác giả: |
Fan, Z. and Helwig, T |
| Năm: |
1999 |
|
| 9. Helwig, T., Yura, J., Herman, R., Williamson, E., and Li, D., (2007). “Design Guidelines for Trapezoidal Box Girder Systems,” Report No. FHWA/TX-07/0-4307-1, Center for Transportation Research, University of Texas at Austin |
Sách, tạp chí |
| Tiêu đề: |
Design Guidelines for Trapezoidal Box Girder Systems |
| Tác giả: |
Helwig, T., Yura, J., Herman, R., Williamson, E., and Li, D |
| Năm: |
2007 |
|
| 10. AASHTO (2003). AASHTO Guide Specification for Horizontally Curved Steel Girder Highway Bridges . American Association of State Highway and Transportation Officials, Washington, DC |
Sách, tạp chí |
| Tiêu đề: |
AASHTO Guide Specification for Horizontally Curved Steel Girder Highway Bridges |
| Tác giả: |
AASHTO |
| Năm: |
2003 |
|
| 11. Heins, C.P. and Hall, D.H., (1981). Designers Guide to Steel Box Girder Bridges , Booklet No. 3500, Bethlehem Steel Corporation. Archived |
Sách, tạp chí |
| Tiêu đề: |
Designers Guide to Steel Box Girder Bridges |
| Tác giả: |
Heins, C.P. and Hall, D.H |
| Năm: |
1981 |
|