02-Mentor Client Network Analysis Tools

Ultima Mentor Network Analysis Tools Privileged and confidential. The information contained in this material is privileged and confidential, and is intended only for the use of the individual to whom it is addressed and others who have been specifically authorized to receive it If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this material is strictly prohibited If you have received this material in error, please destroy it immediately Lesson Objectives By the end of this lesson you will be able to analyze the network performance and quality based on the network model or rich data from the call database Network Analysis Tools Analysis Tools The following tools can be used for the network analysis: • • • • • • KPI-based maps and reports Call trace-based maps and reports Event Viewer Statistics Viewer Combined maps Computed maps Network Analysis Tools Network Performance KPI-based Maps KPI map layers are based on selected KPIs, showing aggregated data for a time resolution ranging from hour up to all the dates included in the model Network Analysis Tools Network Performance KPI-based Maps – KPIs and Aggregation • Select the required KPIs (the available KPIs appear according to the network vendor) • Each selected KPI will be saved as a separate layer Network Analysis Tools Commonly Used KPIs – Example • • • • • • • • • Bad Call Rate Call Attempts Soft HO Factor Softer HO Factor Primary Traffic Code Traffic Access Failure Rate Dropped Call Rate Average Power Network Analysis Tools Network Performance KPI-based Maps – Time Range • Date and Time Range • Click the browse button to open the Date and Time Range dialog box • In the Date Range area, select a date range or specific dates • In the Time Range area, select one of the available options: 24 hours, Busy Hours, Hours (from/to) Network Analysis Tools Network Performance KPI-based Maps – Save Layer • By default, the layers are saved to a default KPIs folder under the GIS category (folder can be edited) If you not choose to save the layers, they can be displayed in the Detailed Table only Network Analysis Tools Network Performance KPI-based Maps – Display • Once the KPI map is ready, a dialog box is displayed: • Details – displays warnings generated during the map creation • Detailed Table – displays the selected KPIs for each sector in the selection in the Detailed Table • Each selected KPI layer is displayed in the Layers pane, in the specified folder under the GIS category Network Analysis Tools Network Performance KPI-based Maps – Example • • Use the sector tooltip to view the KPI summary for selected layers In the Detailed Table you can view individual element values Network Analysis Tools 10 ... analyze the network performance and quality based on the network model or rich data from the call database Network Analysis Tools Analysis Tools The following tools can be used for the network analysis: ... element values Network Analysis Tools 10 Displaying Histograms You can display a histogram of the map layers in order to view a graphical display of the values in the layer Network Analysis Tools 11... all hours Network Analysis Tools 15 Performance Maps (cont.) • Choose the Map type: • Binned map • Sector-level map – map will be aggregated to cell level (Model only) Network Analysis Tools 16