ATM (CLASICAL IP) Key Commands Shows and Debugs Interface atm 0 Ip address 10.1.1.1 255.255.255.0 Atm pvc 1 0 40 aal5snap Atm pvc 2 0 50 aal5snap Map-group atm-map ! map-list atm-map ip 10.1.1.2 atm-vc 1 BROADCAST ip 10.1.1.3 atm-vc 2 BROADCAST appletalk 10.2 atm-vc 5 BROADCAST IPX 2C.1.1.1 atm-vc 10 BROADCAST On 1010: Int atm 1/0/0 Atm pvc 0 40 interface atm 1/1/1 0 140 Atm pvc 0 50 interface atm 2/2/0 0 160 Etc. Show atm ilmi Show interface atm 0. Use it to find the atm nsap address of the remote mapped svc target Show atm pvc Show atm svc Additional Commands Svc: Int atm 0 Ip address 10.1.1.1 255.255.255.0 Atm esi-address 11100000000.00 Atm pvc 1 0 5 qsaal Atm pvc 2 0 16 ilmi Map-group ccie ! map-list ccie ip 10.1.1.2 atm-nsap 47.009781000000003177775444. 222200000000.00 BROADCAST ip 10.1.1.3 atm-nsap 47.009781000000003177775444. 333300000000.00 BROADCAST Spot The Issue Notes 1 0 5 qsaal 1 0 16 ilmi • Use subinterfaces whenever possible (or allowed). • Only does IP! If you want to do IPX or Appletalk, must use LANE . Int atm 1/0/0 Atm pvc 0 40 interface atm 1/1/1 0 140 Atm pvc 0 50 interface atm 2/2/0 0 160 Etc. Show atm ilmi Show interface atm 0. Use it to find the atm. Map-group atm- map ! map-list atm- map ip 10.1.1.2 atm- vc 1 BROADCAST ip 10.1.1.3 atm- vc 2 BROADCAST appletalk 10.2 atm- vc 5 BROADCAST IPX 2C.1.1.1 atm- vc 10