LoopStar ® 711 Leveraging a Full Suite of Ethernet and TDM Services to Cost-Effectively Utilize Fiber Networks Carriers and enterprises are looking for inexpensive ways to utilize their infrastructures to take advantage of the cost effectiveness of Ethernet transport and services. One area currently under consideration is how to fully utilize fiber build-outs to continue to offer revenue-generating services such as voice, and to add new packet-based services at the same time. The LoopStar 711 is a fixed configuration, multi-service access platform offering cost-effective and easy-to-manage Ethernet and TDM-based services that allow for the full utilization of fiber networks. The LoopStar 711 offers the complete suite of LoopStar 700 software, AC or DC power options, patented T1/E1 circuit emulation, intelligent management and a mix of connectivity choices, creating a multi-service access platform remarkably versatile for its price point. The LoopStar 711 comes equipped with two 100Base-FX ports, four 10/100Base-T ports and two T1/E1/J1 ports for circuit emulation services. The LoopStar 711 is uniquely designed to offer fiber extension transport, as well as the services that require this transport. Usually deployed at the customer premise, this product can create a resilient infrastructure ideally suited for a variety of applications. Applications • Ethernet anywhere—extending Ethernet services to any size location • Fiber extension—fully utilizing the maximum bandwidth of fiber cable plants • Legacy services—providing carrier-class circuit emulation over a packet infrastructure • MPLS to the edge—extending core services to any size location SPEC SHEET SPEC SHEET www.adc.com • +1-952-938-8080 • 1-800-366-3891 01/06 • 102160AE LoopStar ® 711 LoopStar ® 711 Leveraging a Full Suite of Ethernet and TDM Services to Cost-Effectively Utilize Fiber Networks 2 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Ethernet and Legacy Services for True Convergence Providers of all sizes and types are worried about revenue cannibalization, losing revenues from one type of service in order to add new services. With the LoopStar 711, providers can stop paying for a separate T1/E1 service for voice transport and now carry these TDM services along with new services such as Ethernet or Virtual Private LAN Service (VPLS) over a packet-based infrastructure to begin the migration of their revenue streams. Fiber Extension With its two built-in 100Base-FX ports, the LoopStar 711 is the perfect multi-service solution for providers looking to extend their footprints over fiber connections. This extension can now be used to transport Ethernet traffic or circuit-emulated TDM traffic over the same uplinks. The LoopStar 711 allows providers to leverage and extend their footprint by delivering Ethernet and TDM-based services over existing fiber connections. IP/MPLS Core 100FX Edge Switch Central Office Ethernet T-1 Wireless Backhaul Ethernet PSTN Ethernet Ethernet PBX T-1 T-1 T-1 100FX 100FX 100FX LS 750 LS 711 LS 750 LS 711 LS 711 Specifications Data Interfaces • 4 x 10/100Base-T • 4 x 10/100Base-T • 2 x T1/E1/J1 for circuit emulation • 2 x 100FX (SFP) Management • CLI management interfaces - RS-232 - 10/100 • In-band or out-of-band • SNMP • FTP to download multiple software images and configurations • LoopStar 700 intelligent management Ethernet Services • 802.1d bridging • 802.1p prioritization • 802.1q VLAN tagging/stacking • VLAN switching • MPLS/VPLS • 802.3ad Link Aggregation • Rate-limiting per port or VLAN - 1 Mb/s increments (1 to 100M) - 50 Mb/s increments (100 to 1000M) • Protected Switching Ring (PSR) with 50 msec resiliency • Spanning Tree Protocol Circuit Emulation Services • Framed or unframed mode • Fixed or Adaptive Jitter Buffer • Adaptive, BITS, Loop or Internal (Stratum 4) timing modes • Round-trip and one-way delay measurements • Local and remote loopbacks • ANSI t1.231 reports Physical • 2.2” high x 17” wide x 9” deep • 0° to 50° C (operating) • External AC or DC power • ETSI 300-119-3 • FCC Part 15 – Class A • 60950, EN 60950 • EN 55022 – Class A • CE Mark 01/06 • 102160AE LoopStar ® 711 LoopStar ® 711 Leveraging a Full Suite of Ethernet and TDM Services to Cost-Effectively Utilize Fiber Networks 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891 ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 102160AE 01/06 Original © 2006 ADC Telecommunications, Inc. All Rights Reserved Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site. SPEC SHEET Ordering Information Description Catalog Number LPS-711 AC Package (2T1/E1, 4 10/100BT, 2FX, no optics) *Includes: 1 AC power supply and AC power cord, blanking plate, LPS-711-AC L1 19” and 23” rack mount brackets, console cable, license for basic software and documentation LPS-711-48VDC Package (2T1/E1, 4 10/100BT, 2FX, no optics) *Includes: 1-48VDC power supply (OPM4812), LPS-711-48DC L1 19” and 23” rack mount brackets, console cable, license for basic software and documentation . LoopStar ® 711 Leveraging a Full Suite of Ethernet and TDM Services to Cost-Effectively Utilize Fiber Networks Carriers and enterprises are looking. • 102160AE LoopStar ® 711 LoopStar ® 711 Leveraging a Full Suite of Ethernet and TDM Services to Cost-Effectively Utilize Fiber Networks 2 www.adc.com