Tài liệu KRONE - Datasheet - Cat 6 - Patch Cord - UTP KM8 pdf

KRONE Premis NET ® Application: n Transmission performance exceeds Category 6 requirements n Patch Cords for use in structured cabling in accordance with pr DIN EN 50173 (2001-10) Possible Services: n Ethernet 10 BaseT n Fast Ethernet 100 BaseT n Gigabit Ethernet 1000 BaseT n ATM 155 Mbit/s n TP-PMD 125 Mbit/s n Cable sharing (same or different sevices) n CDDI/TPDDI (FDDI on copper) n Token Ring 4/16 Mbit/s n Analogue Telephony, ISDN KM8 RJ45 Patch Cords Unshielded / Shielded KRONE GmbH Beeskowdamm 3-11 Germany-14167 Berlin Phone +49 (30) / 8453-1422 Fax +49 (30) / 8453-1412 http://www.krone.com/km8series vertrieb@krone.com Return Loss KM8 RJ45 Patch Cord Frequency (MHz) Frequency (MHz) dB (97047) 02.2002 Subject to changes n Description All the KRONE Category 6 Patch Cords are based on the KRONE KM8 plug. The KM8 RJ45 Patch Cords exceed the requirements of Category 6 according to TIA/EIA 568 B.2-1 (Draft 9, 2001-06-16) or CD2 ISO/IEC 11801 2 nd edition (2001-04-19) due to the integrated cable management of the KM8 plug. The KM8 RJ45 Patch Cords have a transparent boot to maintain the minimal bending radius. The KM8 RJ45 Patch Cords are offered in different lengths. Typical measurements of a KRONE KM8 RJ45 Patch Cord (length 2m) NEXT KM8 RJ45 Patch Cord dB . the KRONE Category 6 Patch Cords are based on the KRONE KM8 plug. The KM8 RJ45 Patch Cords exceed the requirements of Category 6 according to TIA/EIA 568 . B. 2-1 (Draft 9, 200 1-0 6- 1 6) or CD2 ISO/IEC 11801 2 nd edition (200 1-0 4-1 9) due to the integrated cable management of the KM8 plug. The KM8 RJ45 Patch Cords