Synthesis lafeo3 for photodegradation of pollutants in wastewater Nghiên cứu tổng hợp vật liệu quang xúc tác LaFeO3 cho phản ứng phân hủy hợp chất hữu cơ gây ô nhiễm trong nước thải

Synthesis lafeo3 for photodegradation of pollutants in wastewater Nghiên cứu tổng hợp vật liệu quang xúc tác LaFeO3 cho phản ứng phân hủy hợp chất hữu cơ gây ô nhiễm trong nước thải Synthesis lafeo3 for photodegradation of pollutants in wastewater Nghiên cứu tổng hợp vật liệu quang xúc tác LaFeO3 cho phản ứng phân hủy hợp chất hữu cơ gây ô nhiễm trong nước thải luận văn tốt nghiệp thạc sĩ

MINISTRY OF EDUCATION AND TRAINING HA NOI UNIVERSITY OF SCIENCES AND TECHNOLOGY PHAN CHI NHAN PHAN CHI NHAN CHEMICAL ENGINEERING SYNTHESIS LAFEO3 FOR PHOTODEGRADATION OF POLLUTANTS IN WASTEWATER MASTER THESIS YEAR : 2017 HA NOI - 2019 MINISTRY OF EDUCATION AND TRAINING HA NOI UNIVERSITY OF SCIENCES AND TECHNOLOGY - PHAN CHI NHAN SYNTHESIS LAFEO3 FOR PHOTODEGRADATION OF POLLUTANTS IN WASTEWATER CHEMICAL ENGINEERING MASTER THESIS SUPERVISOR ASSOCIATE PROFESSOR: PHAM THANH HUYEN HA NOI - 2019 Declaration statement I declare that: This is my own research work, the data and results presented in the thesis are true, are allowed to use by the authors and have never been published in any works Ha Noi, October, 2019 Phan Chi Nhan ACKNOWLEDGEMENT This work has been supported by the RoHan Project funded by the German Academic Exchange Service (DAAD, No 57315854) and the Federal Ministry for Economic Cooperation and Development (BMZ) inside the framework “SDG Bilateral Graduate school programme I would like to express my deep gratitude to my principal supervisor, Associate Professor Pham Thanh Huyen I thank Assc Prof Pham Huyen wholeheartedly for her great academic guidance, valuable advice, and constant encouragement I would like to give a big thank to Professor Malte Brasholz, who is my supervisor at this time I worked in Germany Thank you for giving me an opportunity to study in a good condition and learn more about interesting culture of Germany Countless thanks are also dedicated to my Mum, my sister and younger brother, my other family members and my friends who have always supported and accompanied me from my MsC Beginning to end Finally, I would like to thank my father, Mr Phan Van Huan (1945 – 2017), who brought me to science, give me a passion about chemistry and he is the motivation for me to finish this project This thesis is a present, which I want to give to my father Thank him for all TABLE OF CONTENTS ACKNOWLEDGEMENT TABLE OF CONTENT I CHAPTER 1: LITERATURE REVIEW 1 Introduction .1 Lanthanum Ferrite (LFO) Perovskite 2.1 Structure .3 2.2 Optical property 2.3 Magnetic property Lanthanum Ferrite as Visible-light Photocatalyst 3.1 Application in textile wastewater treatment 3.2 Photocatalytic mechanism Synthetic methods of LFO 10 4.1 Sol-gel method 11 4.2 Hydrothermal method .13 4.3 Sol-gel hydrothermal method 17 Factors affecting photocatalytic activity of LFO material 18 5.1 Surface area 18 5.2 Band gap energy 21 5.3 Morphology .22 5.4 Crystallinity .25 5.5 Dopants 27 CHAPTER 2: EXPERIMENTAL .30 Synthesis of LaFeO3 30 Characterization of LFO .30 Experiment of photocatalytic activity 31 CHAPTER RESULTS AND DICUSSION 33 Thermal Analysis .33 i XRD analysis 34 Morphological analysis 35 BET analysis .36 Band Gap energy result 37 Calibration curve of dyes and 17β-Estradiol 38 Photocatalytic activity of LFO nanoparticles .40 Efect of reaction condition on photodegradation efficiencies 42 Effect of catalytic concentration on photodegradation efficiencies 44 10 Effect of H2O2 concentration on photodegradation efficiencies .45 11 Comparison of catalytic activity for different dyes 46 12 Photodegradation of 17β-Estradiol 47 47 13 Effect of light intensity on photodegradation efficiencies 48 CONCLUSIONS .49 Recommendations for future research 49 REFERENCES 51 ii LIST OF TABLES Table Optical band gap values of LFO nanomaterials synthesized by various methods .5 Table Particle size and morphologies of LFO synthesized by sol-gel method using different templates 12 Table The influences of the hydrothermal temperature on the formation of LFO powders (Adopted from (Ji, Dai et al., 2013)) 17 Table Photocatalytic performance of LFO for the degradation of dyes .20 Table Degradation rate of dyes solution on different morphologies LFO nanoparticles 24 Table Effects of calcination temperature on the BET specific surface area and pore parameters of LFO nanoparticles 37 iii LIST OF FIGURES Figure Schematic crystalline structure of orthorhombic LFO (Misch, Birkel et al., 2014) Figure Schematic diagram of LFO antiferromagnetic order (Lee, Yun et al., 2014) Figure Schematic diagram of the reaction mechanism of LFO nanostructures for organic degradation (Adopted from (Thirumalairajan, Girija et al., 2013)) Figure FESEM images of LFO powders from (Feng, Liu et al., 2011) (a) and (Liu and Xu, 2011) (b) 13 Figure XRD patterns of different LFO nanostructures (Thirumalairajan, Girija et al., 2013) 15 Figure Image of LFO nanospheres by HRSEM (Dhinesh Kumar and Jayavel, 2014) 16 Figure RhB degradation % by using LFO samples with different particle sizes (Thirumalairajan, Girija et al., 2012) 19 Figure SEM images of LFO nanostructures with different morphologies: (a) nanocubes; (b) nanorodes; (c) nanospheres; (d) dendritic nanostructures (e) florallike nanosheets; (f) nanowires; (g) nanofibers (Yang, Huang et al., 2006; Leng, Li et al., 2010; Thirumalairajan, Girija et al., 2012; Thirumalairajan, Girija et al., 2013; Dhinesh Kumar and Jayavel, 2014; Thirumalairajan, Girija et al., 2014) 23 Figure (a) XRD pattern at different calcination temperatures; (b and c) degradation of RhB and MB in the presence of LFO calcined at 800°C (Thirumalairajan, Girija et al., 2014) 26 Figure 10 (a) XRD pattern of LFO samples calcined at different temperatures; (b) Degradation of RhB with the use of different LFO samples and P-25TiO2 (Su, Jing et al., 2010) 27 Figure 11 TGA curve of synthesized LaFeO3 sample 33 Figure 12 XRD patterns of LaFeO3 34 Figure 13 SEM images of (a) LFO-C600, (b) LFO-C700, (c) LFO-C800, and (d) LFO-C900 35 Figure.14 HRTEM image of the LFO-C800 .36 Figure.15 Nitrogen adsorption-desorption isotherms of the LFO nanoparticles calcined at different temperatures 36 Figure 16 (a) LFO solid UV-vis absorption spectrum and (b) Schematic of determination of band gap energy .38 Figure 17 Calibration curve of MB 38 39 iv Figure 18 Calibration curve of MB 39 Figure 19 Calibration curve of MO 39 Figure 20 Calibration curve of 17β-Estradiol 40 Fig 21 The photodegradation efficiencies of RhB under visible light irradation by different photocatalysts .40 Figure 22 The change in colour of RhB solution during the reaction 42 Fig.23 Photodegradation efficiencies of Metyl Orange under differences condition 43 Fig 24 Effect of catalytic concentration on photodegradation of MO 44 Fig.25 Effect of H2O2 concentration on photodegradation efficiencies 45 Fig.26 Photodegradation efficiencies for bleaching different dyes 46 Fig.27 The photodegradation efficiencies of 17β-Estradiol under visible light irradation 47 Fig.28 Photodegradation efficiencies of MB by different lamp 48 Fig.29 Photodegradation efficiencies of 7β-Estradiol by different lamp .48 v CHAPTER 1: LITERATURE REVIEW Introduction In recent years, environmental pollution issue, especially wastewater pollution has been increasing alarmingly Due to the rapid development of textile industry and lack of modern technologies for textile wastewater treatment, a considerable amount of harmful organic dyes has been discharged into environment (Yi, Chen et al., 2008) For several dyes with the concentration less than ppm, their presence in water could easily be observed and undesirable (Robinson, McMullan et al., 2001) Among these, the most notable ones include Rhodamine B (RhB), methylene blue (MB) and methyl orange (MO) which have been used as coloured substances for printing or dyeing cotton, leather, silk, wool (Gupta, Suhas et al., 2004) MB causes not only permanent injury to eye but also difficulty in breathing to human and animals (Tan, Ahmad et al., 2008) Meanwhile, experimental research has proven the negative effects arising from RhB and MO on human well-being and ecological environment, including carcinogenicity, toxicity, and mutagenicity (Khataee and Kasiri, 2010) Consequently, wastewater treatment targeting at minimising the levels of these organic compounds has become essential Conventional technologies for treatment of dye-containing water are not sufficiently effective to achieve the current stringent requirements for discharge To overcome the challenges, there has been much attention focusing on advanced oxidation processes (AOPs) which have been suggested as substitutions to previous treatment technologies Until now, there have been a variety of AOPs, including electrochemical oxidation (Gallios, Violintzis et al.,2010; Pang, Wang et al., 2013; Wang, Yue et al., 2014), supercritical water oxidation (Williams and Onwudili, 2006; Wang, Lv et al., 2013), ozonation (Prieto-Rodríguez, Oller et al., 2013), photocatalytic oxidation (Zangeneh, Zinatizadeh et al., 2010; Gümüş and Akbal, 2011; Rodríguez, Gallardo et al., 2012), wet air oxidation (Zhan, Li et al., 2010; Ovejero, Sotelo et al., 2011) and other combinations (Moreira, Vilar et al., 2012; References Abazari, R., et al., (2014) "A unique and facile preparation of lanthanum ferrite nanoparticles in emulsion nanoreactors: Morphology, structure, and efficient photocatalysis." Materials Science in Semiconductor Processing 25(0): 301-306 Acharya, S and P Chakrabarti (2010) "Some interesting observations on the magnetic and electric properties of doped lanthanum orthoferrite." Solid State Communications 150(27): 1234-1237 Ahmed, M., et al., (2011) "Novel Multiferroic La0.95Sb0.05FeO3 Orthoferrite." Materials Chemistry and Physics 129(3): 705-712 Aono, H., et al., (2009) "Conventional synthesis method for fine polymetallic LaFeO3 using ethylene glycol solvent addition." Journal of the Ceramic Society of Japan 117(1369): 1048-1051 Asiltürk, M., et al., (2009) "Effect of Fe 3+ ion doping to TiO2 on the photocatalytic degradation of Malachite Green dye under UV and vis-irradiation." Journal of Photochemistry and Photobiology A: Chemistry 203(1): 64-71 Augugliaro, V., et al., (2012) "Overview on oxidation mechanisms of organic compounds by TiO2 in heterogeneous photocatalysis." Journal of Photochemistry and Photobiology C: Photochemistry Reviews 13(3): 224-245 Basahel, S N., et al., (2015) "Influence of crystal structure of nanosized ZrO(2) on photocatalytic degradation of methyl orange." Nanoscale Research Letters 10: 73 Bellakki, M B., et al., (2010) "Synthesis, characterization, and property studies of (La, Ag)FeO3 (0.0≤ x≤ 0.3) perovskites." Journal of Alloys and Compounds 489(1): 64-71 Bessekhouad, Y., et al., (2003) "Synthesis of photocatalytic TiO2 nanoparticles: optimization of the preparation conditions." Journal of Photochemistry and Photobiology A: Chemistry 157(1): 47-53 Bhat, I., et al., (2013) "Effect of Zn doping on structural, magnetic and dielectric properties of LaFeO3 synthesized through sol–gel auto-combustion process." Materials research bulletin 48(11): 4506-4512 51 Buršík, J., et al., (2013) "Role of reaction atmosphere in preparation of potassium tantalate through sol–gel method." Journal of sol-gel science and technology 68(2): 219-233 Chandradass, J and K H Kim (2010) "Nano-LaFeO3 powder preparation by calcining an emulsion precursor." Materials Chemistry and Physics 122(2–3): 329332 Cheng, G., et al., (2011) "Synthesis, characterization and photocatalysis of SnO2 nanorods with large aspect ratios." Materials Letters 65(21–22): 3327-3329 Cheng, H., et al., (2010) "One-Step Synthesis of the Nanostructured AgI/BiOI Composites with Highly Enhanced Visible-Light Photocatalytic Performances." Langmuir 26(9): 6618-6624 Chong, M N., et al., (2010) "Recent developments in photocatalytic water treatment technology: A review." Water Research 44(10): 2997-3027 Chu, X., et al., (2009) "Trimethylamine sensing properties of nano-LaFeO3 prepared using solid-state reaction in the presence of PEG400." Materials Science and Engineering: B 164(1): 65-69 Clark, J H., et al., (2010) "Visible light photo-oxidation of model pollutants using CaCu3Ti4O12: An experimental and theoretical study of optical properties, electronic structure, and selectivity." Journal of the American Chemical Society 133(4): 10161032 Couch, K., et al., (2014) "Reactivity of chlorine radicals with wastewater constituents in support of UV-based AOPs." Abstracts of paper of the American Chemical Society 248 De Lima, O., et al., (2009) "Magnetic phase evolution in the LaMn1− xFexO3+y system." Journal of applied physics 105(1): 013907 Desai, P and A A Athawale (2013) "Microwave combustion synthesis of silver doped lanthanum ferrite magnetic nanoparticles." Defence Science Journal 63(3): 285-291 Dhinesh Kumar, R and R Jayavel (2014) "Facile hydrothermal synthesis and characterization of LaFeO3 nanospheres 52 for visible light photocatalytic applications." Journal of Materials Science: Materials in Electronics 25(9): 39533961 Ding, J., et al., (2010) "Microwave-assisted synthesis of perovskite ReFeO3 (Re: La, Sm, Eu, Gd) photocatalyst." Materials Science and Engineering: B 171(1–3): 31-34 Dong, S., et al., (2009) "Photocatalytic activities of LaFe1−xZnxO3 nanocrystals prepared by sol–gel auto-combustion method." Journal of materials science 44(10): 2548-2552 Feng, J., et al., (2011) "Effects of PVA content on the synthesis of LaFeO3 via sol– gel route." Ceramics International 37(4): 1203-1207 Fossdal, A., et al., (2004) "Crystal structure and thermal expansion of La1− xSrxFeO3− δ materials." Journal of the American Ceramic Society 87(10): 1952- 1958 Gabal, M A., et al., (2006) "Formation of LaFeO3 and thermal decomposition reactions in lanthanum(III) oxalate–iron(II) oxalate crystalline mixture." Journal of materials science 41(22): 7597-7603 Gaikwad, V., et al., (2015) "Investigation of photocatalytic and dielectric behavior of LaFeO3 nanoparticles prepared by microwave-assisted sol–gel combustion route." Journal of sol-gel science and technology: 1-9 Gallios, G., et al., Electrochemical oxidation of synthetic dyes in simulated wastewaters: Electrochemical oxidation of dyes in wastewaters Gao, K and S Li (2012) "Multi-modal TiO2–LaFeO3 composite films with high photocatalytic activity and hydrophilicity." Applied Surface Science 258(17): 64606464 Giannakas, A., et al., (2004) "Preparation, characterization and investigation of catalytic activity for NO+CO reaction of LaMnO3 and LaFeO3 perovskites prepared via microemulsion method." Applied Catalysis B: Environmental 49(3): 147-158 Gosavi, P V and R B Biniwale (2010) "Pure phase LaFeO3 perovskite with improved surface area synthesized using different routes and its characterization." Materials Chemistry and Physics 119(1–2): 324-329 53 Gümüş, D and F Akbal (2011) "Photocatalytic Degradation of Textile Dye and Wastewater." Water, Air, & Soil Pollution 216(1-4): 117-124 Guo, Y., et al., (2007) "High Photocatalytic Capability of Self-Assembled Nanoporous WO3 with Preferential Orientation of (002) Planes." Environmental Science & Technology 41(12): 4422-4427 Gupta, V., et al., (2004) "Removal of rhodamine B, fast green, and methylene blue from wastewater using red mud, an aluminum industry waste." Industrial & engineering chemistry research 43(7): 1740-1747 Hou, J., et al., (2011) "Facile synthesis and visible-light photocatalytic activity of bismuth titanate nanorods." Journal of Nanoparticle Research 13(10): 5557-5564 Hou, L., et al., (2006) "Preparation, characterization and investigation of catalytic activity of Li-doped LaFeO3 nanoparticles." Journal of sol-gel science and technology 40(1): 9-14 Hu, C C., et al., (2009) "Structure Characterization and Tuning of Perovskite‐Like NaTaO3 for Applications in Photoluminescence and Photocatalysis." Journal of the American Ceramic Society 92(2): 460-466 Hui, S., et al., (2010) "Preparation and characterization of perovskite REFeO3 nanocrystalline powders." Journal of Rare Earths 28(3): 416-419 Ita, B., et al., (2003) "Magnetic properties of lanthanum orthoferrite fine powders prepared by different chemical routes." Journal of Chemical Sciences 115(5-6): 519-524 Ji, K., et al., (2013) "Glucose-assisted hydrothermal preparation and catalytic performance of porous LaFeO3 for toluene combustion." Journal of Solid State Chemistry 199: 164-170 Jin, H., et al., (2006) "Facile synthesis of crystal like shape mesoporous silica SBA16." Microporous and mesoporous materials 97(1): 141-144 Kanhere, P and Z Chen (2014) "A Review on Visible Light Active PerovskiteBased Photocatalysts." Molecules 19(12): 19995-20022 54 Khataee, A and M B Kasiri (2010) "Photocatalytic degradation of organic dyes in the presence of nanostructured titanium dioxide: influence of the chemical structure of dyes." Journal of Molecular Catalysis A: Chemical 328(1): 8-26 Kida, T., et al., (2010) "High Oxygen Permeation in Ba0.95La0.05FeO3-δ Membranes with Surface Modification." ACS Applied Materials & Interfaces 2(10): 2849-2853 Kodama, R H and A E Berkowitz (1999) "Atomic-scale magnetic modeling of oxide nanoparticles." Physical Review B 59(9): 6321 Köferstein, R., et al., (2013) "Magnetic and optical investigations on LaFeO3 powders with different particle sizes and corresponding ceramics." Solid State Ionics 249: 1-5 Kumar, A S., et al., (2014) "Surface driven effects on magnetic properties of antiferromagnetic LaFeO3 nanocrystalline ferrite." Journal of applied physics 116(11): 113912 Lai, C W., et al., (2014) "An Overview: Recent Development of Titanium Oxide Nanotubes as Photocatalyst for Dye Degradation." International Journal of Photoenergy 2014: 1-14 Lee, W.-Y., et al., (2014) "Characterization and magnetic properties of LaFeO3 nanofibers synthesized by electrospinning." Journal of Alloys and Compounds 583: 320-324 Lee, Y.-C., et al., (2010) "Size-driven magnetic transitions in monodisperse MnO nanocrystals." Journal of applied physics 107(9) Leng, J., et al., (2010) "Synthesis of ultrafine lanthanum ferrite (LaFeO3) fibers via electrospinning." Materials Letters 64(17): 1912-1914 Li, E J., et al., (2010) "Bismuth-Containing Semiconductor Photocatalysts." Progress in Chemistry 22(12): 2282-2289 Li, F.-t., et al., (2010) "Preparation of Ca-doped LaFeO3 nanopowders in a reverse microemulsion and their visible light photocatalytic activity." Materials Letters 64(2): 223-225 55 Li, L., et al., (2013) "Visible-light photochemical activity of heterostructured core– shell materials composed of selected ternary titanates and ferrites coated by TiO2." ACS Applied Materials & Interfaces 5(11): 5064-5071 Li, L., et al., (2014) "Enhanced visible light-responsive photocatalytic activity of LnFeO3 (Ln= La, Sm) nanoparticles by synergistic catalysis." Materials research bulletin 50: 18-22 Li, M., et al., (2014) "Bismuth Doped Lanthanum Ferrite Perovskites as Novel Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells." ACS Applied Materials & Interfaces 6(14): 11286-11294 Li, S., et al., (2014) "Fabrication of unique ribbon-like porous LaFeO3 nanofibers photocatalyst via electrospinning." Applied Physics A 117(3): 1381-1386 Li, S., et al., (2007) "Photoinduced charge property of nanosized perovskite-type LaFeO3 and its relationships with photocatalytic activity under visible irradiation." Materials research bulletin 42(2): 203-212 Li, X and J Zang (2009) "Facile hydrothermal synthesis of sodium tantalate (NaTaO3) nanocubes and high photocatalytic properties." The Journal of Physical Chemistry C 113(45): 19411-19418 Li, Z., et al., (2005) "Comparative study of sol–gel-hydrothermal and sol–gel synthesis of titania–silica composite nanoparticles." Journal of Solid State Chemistry 178(5): 1395-1405 Li, Z., et al., (2013) "Different nanostructured In2O3 for photocatalytic decomposition of perfluorooctanoic acid (PFOA)." Journal of Hazardous Materials 260: 40-46 Liotta, L., et al., (2015) "La0.6Sr0.4FeO3‐δ and La0.6Sr0.4Co0.2Fe0.8O3‐δ Perovskite Materials for H2O2 and Glucose Electrochemical Sensors." Electroanalysis Liu, G., et al., (2013) "Visible-Light-Active Elemental Photocatalysts." ChemPhysChem 14(5): 885-892 Liu, T and Y Xu (2011) "Synthesis of nanocrystalline LaFeO3 powders via glucose sol–gel route." Materials Chemistry and Physics 129(3): 1047-1050 56 Liu, Y., et al., (2014) "Self-assembled three-dimensional hierarchical Bi2WO6 microspheres by sol–gel–hydrothermal route." Ceramics International 40(4): 62036209 Liu, Y and R Zuo (2012) "Tunable morphology and optical absorption of bismuth ferrite synthesized by sol–gel–hydrothermal method." Journal of Materials Science: Materials in Electronics 23(12): 2276-2281 Lu, R., et al., (2013) "Morphology-controlled synthesis and growth mechanism of lead-free bismuth sodium titanate nanostructures via the hydrothermal route." CrystEngComm 15(19): 3984-3991 Martin, D J (2014) Investigation into high efficiency visible light photocatalysts for water reduction and oxidation, UCL (University College London) Misch, L M., et al., (2014) "Rapid microwave-assisted sol–gel preparation of Pdsubstituted LnFeO3 (Ln= Y, La): phase formation and catalytic activity." Dalton Transactions 43(5): 2079-2087 Moreira, F C., et al., (2012) "Treatment of a pesticide-containing wastewater using combined biological and solar-driven AOPs at pilot scale." Chemical Engineering Journal 209(0): 429-441 Nakata, K and A Fujishima (2012) "TiO2 photocatalysis: Design and applications." Journal of Photochemistry and Photobiology C: Photochemistry Reviews 13(3): 169-189 Nakayama, S (2001) "LaFeO3 perovskite-type oxide prepared by oxide-mixing, co-precipitation and complex synthesis methods." Journal of materials science 36(23): 5643-5648 Ovejero, G., et al., (2011) "Wet air oxidation and catalytic wet air oxidation for dyes degradation." Environmental Science and Pollution Research 18(9): 15181526 Pang, L., et al., (2013) "Treatment of methyl orange dye wastewater by cooperative electrochemical oxidation in anodic-cathodic compartment." Water Science and Technology 67(3): 521-526 57 Parida, K., et al., (2010) "Fabrication of nanocrystalline LaFeO3: an efficient sol– gel auto-combustion assisted visible light responsive photocatalyst for water decomposition." International journal of hydrogen energy 35(22): 12161-12168 Pena, M and J Fierro (2001) "Chemical structures and performance of perovskite oxides." Chemical Reviews 101(7): 1981-2018 Phokha, S., et al., (2015) "Structure, magnetic, and dielectric properties of Tidoped LaFeO3 ceramics synthesized by polymer pyrolysis method." Materials research bulletin 67: 118-125 Phokha, S., et al., (2014) "Structure, optical and magnetic properties of LaFeO3 nanoparticles prepared by polymerized complex method." Journal of sol-gel science and technology 71(2): 333-341 Popa, M and J M C Moreno (2011) "Lanthanum ferrite ferromagnetic nanocrystallites by a polymeric precursor route." Journal of Alloys and Compounds 509(10): 4108-4116 Prieto-Rodríguez, L., et al., (2013) "Application of solar AOPs and ozonation for elimination of micropollutants in municipal wastewater treatment plant effluents." Water Research 47(4): 1521-1528 Qi, X., et al., (2003) "A simple way to prepare nanosized LaFeO3 powders at room temperature." Ceramics International 29(3): 347-349 Qiu, Y., et al., (2014) "Size effect on magnetic and dielectric properties in nanocrystalline LaFeO3." Journal of Materials Science: Materials in Electronics 25(2): 760-764 Reddy, K H., et al., (2012) "Facile fabrication of Bi2O3/Bi–NiTaO3 photocatalysts for hydrogen generation under visible light irradiation." RSC Advances 2(25): 9423-9436 Robinson, T., et al., (2001) "Remediation of dyes in textile effluent: a critical review on current treatment technologies with a proposed alternative." Bioresource Technology 77(3): 247-255 58 Rodríguez, A L., et al., (2012) "Photocatalytic degradation of methylene blue dye in aqueous solutions by photocatalytic oxidation SiO2-TiO2." Advanced Science Letters 13: 841-843 Roduner, E (2006) "Size matters: why nanomaterials are different." Chemical Society Reviews 35(7): 583-592 Rusevova, K., et al., (2014) "LaFeO3 and BiFeO3 perovskites as nanocatalysts for contaminant degradation in heterogeneous Fenton-like reactions." Chemical Engineering Journal 239: 322-331 Saad, A A., et al., (2013) "Structural, optical and magnetic properties of perovskite (La1− xSrx)(Fe1− xNix)O3,(x= 0.0, 0.1 & 2) nanoparticles." Electronic Materials Letters 9(1): 77-81 Sacco, O., et al., (2012) "Photocatalytic degradation of organic dyes under visible light on n-doped photocatalysts." International Journal of Photoenergy 2012 Salah, L., et al., (2015) "Magnetically roll-oriented LaFeO3 nanospheres prepared using oxalic acid precursor method." Journal of Materials Science: Materials in Electronics 26(2): 1045-1052 Sayama, K., et al., (2010) "Highly active WO3 semiconductor photocatalyst prepared from amorphous peroxo-tungstic acid for the degradation of various organic compounds." Applied Catalysis B: Environmental 94(1–2): 150-157 Scholl, A., et al., (2000) "Observation of antiferromagnetic domains in epitaxial thin films." Science 287(5455): 1014-1016 Shen, H., et al., (2009) "Combustion synthesis and characterization of nano‐ crystalline LaFeO3 powder." physica status solidi (a) 206(7): 1420-1424 Sivakumar, M., et al., (2004) "Sonochemical synthesis of nanocrystalline LaFeO3." Journal of Materials Chemistry 14(4): 764-769 Soltani, T and M H Entezari (2013) "Sono-synthesis of bismuth ferrite nanoparticles with high photocatalytic activity in degradation of Rhodamine B under solar light irradiation." Chemical Engineering Journal 223: 145-154 59 Sorescu, M., et al., (2011) "Investigation of LaFeO3 perovskite growth mechanism through mechanical ball milling of lanthanum and iron oxides." Journal of materials science 46(20): 6709-6717 Su, H., et al., (2010) "Synthesis of large surface area LaFeO3 nanoparticles by SBA-16 template method as high active visible photocatalysts." Journal of Nanoparticle Research 12(3): 967-974 Sun, M., et al., (2010) "Structure, dye degradation activity and stability of oxygen defective BaFeO3-x." Materials transactions 51(11): 1981-1989 Tan, I., et al., (2008) "Adsorption of basic dye on high-surface-area activated carbon prepared from coconut husk: Equilibrium, kinetic and thermodynamic studies." Journal of Hazardous Materials 154(1): 337-346 Tang, P., et al., (2013) "Microwave-assisted synthesis of nanoparticulate perovskite LaFeO3 as a high active visible-light photocatalyst." Current Applied Physics 13(2): 340-343 Tang, P S., et al., (2011) Synthesis of Nanocrystalline LaFeO3 by Precipitation and its Visible-Light Photocatalytic Activity Materials Science Forum, Trans Tech Publ Thakuria, P and P Joy (2012) "Enhanced magnetic parameters in the morphotropic phase boundary region of nanocrystalline multiferroic Bi1− xLaxFeO3." Solid State Communications 152(16): 1609-1612 Thirumalairajan, S., et al., (2012) "Controlled synthesis of perovskite LaFeO3 microsphere composed of nanoparticles via self-assembly process and their associated photocatalytic activity." Chemical Engineering Journal 209: 420-428 Thirumalairajan, S., et al., (2012) "Novel Synthesis of LaFeO3 Nanostructure Dendrites: A Systematic Investigation of Growth Mechanism, Properties, and Biosensing for Highly Selective Determination of Neurotransmitter Compounds." Crystal Growth & Design 13(1): 291-302 Thirumalairajan, S., et al., (2013) "Shape evolution of perovskite LaFeO3 nanostructures: a systematic investigation of growth mechanism, properties and morphology dependent photocatalytic activities." RSC Advances 3(20): 7549-7561 60 Thirumalairajan, S., et al., (2014) "Photocatalytic degradation of organic dyes under visible light irradiation by floral-like LaFeO3 nanostructures comprised of nanosheet petals." New Journal of Chemistry 38(11): 5480-5490 Tien, N., et al., (2014) "Sol-gel preparation and magnetic properties of nanocrystalline lanthanum ferrite." Russian Journal of General Chemistry 84(7): 1261-1264 Vansutre, S., et al., (2000) "Magnetic and Dielectric Measurements of Mn Substituted LaFeO3 Compounds." Venkaiah, G., et al., (2013) "Solution combustion synthesis and characterization of nano crystalline lanthanum ferrite using glycine as a fuel." Int J Mater Methods Technol 1: 01-07 Wang, B., et al., (2012) "Structural, magnetic and photocatalytic properties of Sr2+doped BiFeO3 nanoparticles based on an ultrasonic irradiation assisted selfcombustion method." Ceramics International 38(8): 6643-6649 Wang, D and M Gong (2011) "Surface and shape anisotropy effects in LaFeO3 nanoparticles." Journal of applied physics 109(11): 114304 Wang, L., et al., (2014) "Optimization of electrochemical oxidation of dye wastewater using response surface methodology." Chinese Journal of Environmental Engineering 8(3): 990-996 Wang, Q., et al., (2013) "Decomposition of dyeing wastewater by supercritical water oxidation." Fresenius Environmental Bulletin 22(12): 3588-3595 Wang, S.-F., et al., (2013) "Role of pH, organic additive, and chelating agent in gel synthesis and fluorescent properties of porous monolithic alumina." The Journal of Physical Chemistry C 117(10): 5067-5074 Wang, W., et al., (2013) "Low-temperature synthesis of BaTiO3 powders by the sol–gel-hydrothermal method." Ceramics International 39(6): 7127-7134 Wang, W., et al., (2015) "Research progress of perovskite materials in photocatalysis-and photovoltaics-related energy conversion and environmental treatment." Chemical Society Reviews 61 Wang, X J., et al., (2012) Photocatalytic Degradation of Water-Soluble Azo Dyes by LaFeO3 and YFeO3 Advanced Materials Research, Trans Tech Publ Wang, Z., et al., (2010) "Relationship between microstructure and photocatalytic properties of nanomaterials." Zeitschrift für Kristallographie Crystalline Materials 225(11): 520-527 Wei, Z.-X., et al., (2012) "Synthesis, magnetization and photocatalytic activity of LaFeO3 and LaFe0.5Mn0.5−xO3−δ." Materials Chemistry and Physics 136(2–3): 755761 William IV, L., et al., (2005) "Magnetically agitated photocatalytic reactor for photocatalytic oxidation of aqueous phase organic pollutants." Environmental Science & Technology 39(20): 8052-8056 Williams, P T and J A Onwudili (2006) "Destruction of Environmental Organic Pollutants by Supercritical Water Oxidation." Environmental Technology 27(8): 823-834 Worayingyong, A., et al., (2008) "The effect of preparation: Pechini and Schiff base methods, on adsorbed oxygen of LaCoO3 perovskite oxidation catalysts." Colloids and Surfaces A: Physicochemical and Engineering Aspects 315(1–3): 217225 Wu, H., et al., (2015) "A novel efficient boron-doped LaFeO3 photocatalyst with large specific surface area for phenol degradation under simulated sunlight." CrystEngComm 17(20): 3859-3865 Wu, J.-M and T.-W Zhang (2004) "Photodegradation of rhodamine B in water assisted by titania films prepared through a novel procedure." Journal of Photochemistry and Photobiology A: Chemistry 162(1): 171-177 Wu, J., et al., (2015) "Chemically controlled growth of porous CeO2 nanotubes for Cr(VI) photoreduction." Applied Catalysis B: Environmental 174–175(0): 435-444 Xiao, P., et al., (2013) "Oxidative Degradation of Organic Dyes Over Supported Perovskite Oxide LaFeO3/SBA-15 Under Ambient Conditions." Catalysis Letters 143(9): 887-894 62 Xiong, X., et al., (2015) "Formation and Photocatalytic Activity of BaTiO3 Nanocubes via Hydrothermal Process." Journal of Nanomaterials 2015: Yang, J., et al., (2009) "Markedly enhancing the visible-light photocatalytic activity of LaFeO3 by post-treatment in molten salt." Reaction Kinetics and Catalysis Letters 97(2): 269-274 Yang, Z., et al., (2006) "Controlled synthesis of highly ordered LaFeO3 nanowires using a citrate-based sol–gel route." Materials research bulletin 41(2): 274-281 Yao, P J., et al., (2013) Effect of CTAB Concentration on Synthesis and Sensing Properties of Perovskite Oxide via a Hydrothermal Process Key Engineering Materials, Trans Tech Publ Yao, W F., et al., (2004) "Photocatalytic property of perovskite bismuth titanate." Applied Catalysis B: Environmental 52(2): 109-116 Yi, F., et al., (2008) "Effect of activated carbon fiber anode structure and electrolysis conditions on electrochemical degradation of dye wastewater." Journal of Hazardous Materials 157(1): 79-87 Yoo, J., et al., La0.2Sr0.8Cr0.2Fe0.8O3-δ (2011) using "Measurement gas-tight of electrical electrochemical conductivity cells." Journal of of Electroceramics 26(1-4): 56-62 Yu, H., et al., (2011) "Sol–gel hydrothermal synthesis of visible-light-driven Crdoped SrTiO3 for efficient hydrogen production." Journal of Materials Chemistry 21(30): 11347-11351 Yu, K.-s., et al., (2013) "Synthesis, Characterization, and Photocatalysis of ZnO and Er-Doped ZnO." Journal of Nanomaterials 2013: Zangeneh, H., et al., "Photocatalytic oxidation of organic dyes and pollutants in wastewater using different modified titanium dioxides: A comparative review." Journal of Industrial and Engineering Chemistry(0) Zhan, Y., et al., (2010) "Copper hydroxyphosphate as catalyst for the wet hydrogen peroxide oxidation of azo dyes." Journal of Hazardous Materials 180(1): 481-485 Zhang, J and H Li (2013) Perovskite: crystallography, chemistry and catalytic performance New York, Nova Publishers 63 Zhang, L., et al., (2011) "Investigation on the degradation of acid fuchsin induced oxidation by MgFe2O4 under microwave irradiation." Journal of Molecular Catalysis A: Chemical 335(1): 31-37 Zhang, W., et al., (2013) "Sol-gel preparation of la doped strontium titanate." Asian Journal of Chemistry 25(6): 3263-3266 Zhao, H., et al., (2014) "A Review on Bismuth-Related Nanomaterials for Photocatalysis." Reviews in Advanced Sciences and Engineering 3(1): 3-27 Zheng, W., et al., (2000) "Hydrothermal synthesis of LaFeO3 under carbonatecontaining medium." Materials Letters 43(1–2): 19-22 Zhu, S., et al., (2008) "Two-step synthesis of a novel visible-light-driven K2Ta2O6− x Nx catalyst for the pollutant decomposition." Journal of Photochemistry and Photobiology A: Chemistry 193(1): 33-41 Ziegler, E., et al., (1981) "Electrical properties and non‐stoichiometry in ZnO single crystals." physica status solidi (a) 66(2): 635-648 Gupta, V., et al (2004) "Removal of rhodamine B, fast green, and methylene blue from wastewater using red mud, an aluminum industry waste." Industrial & engineering chemistry research 43(7): 1740-1747 Kanhere, P and Z Chen (2014) "A review on visible light active perovskite-based photocatalysts." Molecules 19(12): 19995-20022 Khataee, A and M B Kasiri (2010) "Photocatalytic degradation of organic dyes in the presence of nanostructured titanium dioxide: influence of the chemical structure of dyes." Journal of Molecular Catalysis A: Chemical 328(1): 8-26 Kumar, M., et al (2009) "Synthesis of pure and Sr-doped LaGaO 3, LaFeO and LaCoO and Sr, Mg-doped LaGaO for ITSOFC application using different wet chemical routes." Materials Chemistry and Physics 113(2): 803-815 Kumar, R D and R Jayavel (2014) "Facile hydrothermal synthesis and characterization of LaFeO3 nanospheres for visible light photocatalytic applications." Journal of Materials Science: Materials in Electronics 25(9): 39533961 64 Kumar, R D., et al (2017) "Facile Preparation of LaFeO3/rGO Nanocomposites with Enhanced Visible Light Photocatalytic Activity." Journal of Inorganic and Organometallic Polymers and Materials: 1-9 Li, X and J Zang (2009) "Facile hydrothermal synthesis of sodium tantalate (NaTaO3) nanocubes and high photocatalytic properties." The Journal of Physical Chemistry C 113(45): 19411-19418 Nie, Y., et al (2015) "Enhanced Fenton-like degradation of refractory organic compounds by surface complex formation of LaFeO and H O 2." Journal of Hazardous Materials 294: 195-200 Soltani, T and M H Entezari (2013) "Sono-synthesis of bismuth ferrite nanoparticles with high photocatalytic activity in degradation of Rhodamine B under solar light irradiation." Chemical engineering journal 223: 145-154 Su, H., et al (2010) "Synthesis of large surface area LaFeO3 nanoparticles by SBA-16 template method as high active visible photocatalysts." Journal of Nanoparticle Research 12(3): 967-974 Wang, Y., et al (2006) "Preparation and characterization of perovskite LaFeO nanocrystals." Materials Letters 60(13): 1767-1770 Xiao, P., et al (2013) "Oxidative degradation of organic dyes over supported perovskite oxide LaFeO3/SBA-15 under ambient conditions." Catalysis letters 143(9): 887-894 Yao, W F., et al (2004) "Photocatalytic property of perovskite bismuth titanate." Applied Catalysis B: Environmental 52(2): 109-116 Yi, F and S Chen (2008) "Effect of activated carbon fiber anode structure and electrolysis conditions on electrochemical degradation of dye wastewater." Journal of Hazardous Materials 157(1): 79-87 65 ...MINISTRY OF EDUCATION AND TRAINING HA NOI UNIVERSITY OF SCIENCES AND TECHNOLOGY - PHAN CHI NHAN SYNTHESIS LAFEO3 FOR PHOTODEGRADATION OF POLLUTANTS IN WASTEWATER. .. solution to form a gel, aging of a gel, drying and calcination to obtain the end product In the typical synthesizing of LFO by sol-gel method, one starts with the certain amounts of lanthanum... especially wastewater pollution has been increasing alarmingly Due to the rapid development of textile industry and lack of modern technologies for textile wastewater treatment, a considerable amount of