KY-AOI-TMA-(Part 1. Introduction & Basic Operation)-ENG-191011-v05

Rev 05 KY 3D AOI Standard Training Introduction & Basic Operation 2019.10.11 Technical Support Team Koh Young Technology Inc DISCLAIMER Agenda • Course Objectives • KY 3D AOI Introduction ▪ Defect Type and Measurement Principle • H/W Structure and Major Part • KY 3D AOI Basic Operation ▪ ▪ ▪ ▪ Safety Precaution Machine operation (Power Up/Down Sequences / Bypass) Main GUI S/W Fiducial Teaching & Cam Barcode Teaching • Review Station Introduction Course Objectives Course Objectives On completion of this course the students will be able to accomplish the following tasks; • Understand Defect Type and Inspection Principle • Understand basic operation of KY 3D AOI ▪ ▪ ▪ Identify the location and the function of major components on equipment Interpret safety labels and follow the safety procedures on equipment during operation Operate equipment such as power up & down • Understand AOIGUI main view and basic operation of KY 3D AOI ▪ Job file loading, start and stop the operation on machine ▪ Basic operation to inspect PCB (Image grab, Fiducial Teaching, Cambarcode Teaching) • Operate Review Station Confidential KY 3D AOI Introduction Definition of AOI • Automated optical inspection (AOI) ▪ A key technique used in the manufacture and inspection of electronics printed circuit boards (PCBs) • AOI system is being used to identify the component and solder joint defects at the stage of pre/post reflow process Screen Printer SPI (Solder Paste Inspection) Pre AOI Pick & Place Machine (Component Mounting) Reflow Post AOI Confidential SMT Defect Types [Bridge] [Lift] [Component Shift] Confidential KY 3D AOI • 3D component assembly inspection equipment based on true measurement • Extracts the shapes of components and solder joints, detects all types of defects, and provides technical solution that overcome the limitations of the conventional 2D AOI • Solve Shadow and diffuse problems using patented technology • Solve projection obstacles using multi projection • Standard maximum measurement height is mm and can measure up to 20 mm components (depending on Machine model) without compromising accuracy in Z-axis • Side View Solution (Optional) Confidential Objective and intuitive defect detection • The existing 2D AOI compares images and brightness to detect defects, which relay on the users to their own subjective inspection conditions • Koh Young 3D AOI produces objective, non-deviating inspection results, regardless of the users, through intuitive inspection condition setup utilizing measurement values [Image & Brightness comparison method] [NG] [Utilizing measurement values] [NG] [Good] [Good] [KY 3D AOI Inspection Method] [2D AOI Inspection Method] 10 Confidential ... Operate equipment such as power up & down • Understand AOIGUI main view and basic operation of KY 3D AOI ▪ Job file loading, start and stop the operation on machine ▪ Basic operation to inspect PCB... operation (Power Up/Down Sequences / Bypass) Main GUI S/W Fiducial Teaching & Cam Barcode Teaching • Review Station Introduction Course Objectives Course Objectives On completion of this course...DISCLAIMER Agenda • Course Objectives • KY 3D AOI Introduction ▪ Defect Type and Measurement Principle • H/W Structure and Major Part • KY 3D AOI Basic Operation ▪ ▪ ▪ ▪ Safety Precaution Machine