| Tài liệu tham khảo |
Loại |
Chi tiết |
| [1] H. N. Esfahlan, S. A. Dizaji, and F. Djavanroodi, "Experimental and Numerical Analysis for Hydroforming of Ti6Al4V Alloy Used in Aerospace, Assisted by Floating Disk," Journal of Applied Sciences, vol. 9, no. 16, pp. 2925-2932, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Experimental and Numerical Analysis for Hydroforming of Ti6Al4V Alloy Used in Aerospace, Assisted by Floating Disk |
|
| [2] S. Gatea, H. Ou, B. Lu, and G. McCartney, "Modelling of ductile fracture in single point incremental forming using a modified GTN model," Engineering Fracture Mechanics, vol. 186, pp. 59-79, 2017 |
Sách, tạp chí |
| Tiêu đề: |
Modelling of ductile fracture in single point incremental forming using a modified GTN model |
|
| [3] S. Smirnov, "The healing of damage after the plastic deformation of metals," Frattura ed Integrità Strutturale, no. 24, p. 7, 2013 |
Sách, tạp chí |
| Tiêu đề: |
The healing of damage after the plastic deformation of metals |
|
| [4] M. Gorji, B. Berisha, N. Manopulo, and P. Hora, "Effect of through thickness strain distribution on shear fracture hazard and its mitigation by using multilayer aluminum sheets," Journal of Materials Processing Technology, vol. 232, pp. 19- 33, 2016 |
Sách, tạp chí |
| Tiêu đề: |
Effect of through thickness strain distribution on shear fracture hazard and its mitigation by using multilayer aluminum sheets |
|
| [5] J. Lemaitre, "A continuous damage mechanics model for ductile fracture," Journal of engineering materials and technology, vol. 107, no. 1, pp. 83-89, 1985 |
Sách, tạp chí |
| Tiêu đề: |
A continuous damage mechanics model for ductile fracture |
|
| [6] J. Lemaitre, "Coupled elasto-plasticity and damage constitutive equations," Computer methods in applied mechanics and engineering, vol. 51, no. 1-3, pp.31-49, 1985 |
Sách, tạp chí |
| Tiêu đề: |
Coupled elasto-plasticity and damage constitutive equations |
|
| [7] Z. Yue, H. Badreddine, and K. Saanouni, "A new model describing plastic distortion fully coupled with ductile damage," Procedia Engineering, vol. 81, pp.1234-1239, 2014 |
Sách, tạp chí |
| Tiêu đề: |
A new model describing plastic distortion fully coupled with ductile damage |
|
| [8] M. Brünig, O. Chyra, D. Albrecht, L. Driemeier, and M. Alves, "A ductile damage criterion at various stress triaxialities," International Journal of Plasticity, vol. 24, no. 10, pp. 1731-1755, 2008 |
Sách, tạp chí |
| Tiêu đề: |
A ductile damage criterion at various stress triaxialities |
|
| [9] F. A. McClintock, "A Criterion for Ductile Fracture by the Growth of Holes," Journal of Applied Mechanics, vol. 35, no. 2, pp. 363-371, 1968 |
Sách, tạp chí |
| Tiêu đề: |
A Criterion for Ductile Fracture by the Growth of Holes |
|
| [10] J. R. Rice and D. M. Tracey, "On the ductile enlargement of voids in triaxial stress fields," Journal of the Mechanics and Physics of Solids, vol. 17, no. 3, pp.201-217, 6// 1969 |
Sách, tạp chí |
| Tiêu đề: |
On the ductile enlargement of voids in triaxial stress fields |
|
| [11] M. Cockcroft and D. Latham, "Ductility and the workability of metals," J Inst Metals, vol. 96, no. 1, pp. 33-39, 1968 |
Sách, tạp chí |
| Tiêu đề: |
Ductility and the workability of metals |
|
| [12] N. L. Dung, "Plasticity theory of ductile fracture by void growth and coalescence," Forschung im Ingenieurwesen, vol. 58, no. 5, pp. 135-140, 1992 |
Sách, tạp chí |
| Tiêu đề: |
Plasticity theory of ductile fracture by void growth and coalescence |
|
| [13] Y. Bai and T. Wierzbicki, "Application of extended Mohr–Coulomb criterion to ductile fracture," International Journal of Fracture, vol. 161, no. 1, p. 1, 2010 |
Sách, tạp chí |
| Tiêu đề: |
Application of extended Mohr–Coulomb criterion to ductile fracture |
|
| [14] R. Schiffmann, W. Dahl, and W. Bleck, "Different CDM-models and their ability to describe the damage development at ductile fracture of steel," in ECF13, San Sebastian 2000, 2000 |
Sách, tạp chí |
| Tiêu đề: |
Different CDM-models and their ability to describe the damage development at ductile fracture of steel |
|
| [15] V. C. Hoa, D. W. Seo, and J. K. Lim, "Site of ductile fracture initiation in cold forging: A finite element model," Theoretical and Applied Fracture Mechanics, vol. 44, no. 1, pp. 58-69, 9// 2005 |
Sách, tạp chí |
| Tiêu đề: |
Site of ductile fracture initiation in cold forging: A finite element model |
|
| [16] N. T. Nguyen, D. Y. Kim, and H. Y. Kim, "A continuous damage fracture model to predict formability of sheet metal," Fatigue & Fracture of Engineering Materials & Structures, vol. 36, no. 3, pp. 202-216, 2013 |
Sách, tạp chí |
| Tiêu đề: |
A continuous damage fracture model to predict formability of sheet metal |
|
| [17] D.-Y. Kim, M.-G. Lee, C. A. Lee, N.-T. Nguyen, and H. Y. Kim, "Failure prediction of AZ31B magnesium alloy sheet based on a micro-mechanical void model incorporating the asymmetric plasticity constitutive law," International Journal of Plasticity, vol. 94, pp. 98-121, 2017 |
Sách, tạp chí |
| Tiêu đề: |
Failure prediction of AZ31B magnesium alloy sheet based on a micro-mechanical void model incorporating the asymmetric plasticity constitutive law |
|
| [18] A. L. Gurson, "Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media,"Journal of Engineering Materials and Technology, vol. 99, no. 1, pp. 2-15, 1977 |
Sách, tạp chí |
| Tiêu đề: |
Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media |
|
| [19] V. Tvergaard, "Influence of voids on shear band instabilities under plane strain conditions," (in English), International Journal of Fracture, vol. 17, no. 4, pp.389-407, 1981/08/01 1981 |
Sách, tạp chí |
| Tiêu đề: |
Influence of voids on shear band instabilities under plane strain conditions |
|
| [20] V. Tvergaard and A. Needleman, "Analysis of the cup-cone fracture in a round tensile bar," Acta Metallurgica, vol. 32, no. 1, pp. 157-169, 1// 1984 |
Sách, tạp chí |
| Tiêu đề: |
Analysis of the cup-cone fracture in a round tensile bar |
|