APOLLODOMAIN Key Commands Shows and Debugs Apollo routing host-address Apollo routing 123a ! interface ethernet 0 Apollo network 4ac Apollo access-list MyAcessList deny 4ab.0 FFFF Can use a range (optional: Apollo access-list MyAccessList deny 4a-4f.0 FFFF ! interface ethernet 0 apollo access-group MyAccessList apollo route 4ac 3ab.123b apollo maximum-paths 2 Show apollo interface Show apollo route Show apollo arp Show apollo traffic Additional Commands Spot The Issue Notes Node address is unique for entire router: E0 can be 4ac.1234 S0 can be 3bd.1234 The mask covers all bit without regard to the network.node boundary. For example, FFFF would cover all nodes, FFFFF would cover all nodes and the last byte of the network address Apollo addresses 12 bit network number (in HEX) 20 bit host (in HEX) FFF.FFFFF <- format Permit -1.0 FFFF <- is permit all . APOLLO DOMAIN Key Commands Shows and Debugs Apollo routing host-address Apollo routing 123a ! interface ethernet 0 Apollo network 4ac Apollo access-list. (optional: Apollo access-list MyAccessList deny 4a-4f.0 FFFF ! interface ethernet 0 apollo access-group MyAccessList apollo route 4ac 3ab.123b apollo maximum-paths