NS5 / NS8 / NS10 / NS12 NS Series Advanced Programmable Terminals * Ordering information * Specifications * Configurations * Dimensions, and etc can be found in our PDF brochure. NS-series HMIs Navigate All Areas of Machine Operation, From Daily Operation to Error Recovery NS-Series caters for all your application needs! Enhanced networking features, image progress, easy configuration and libraries allow users to create interfacing screen in no time, thus cutting man-hour cost. Models Available Features NS12- V1 NS10- V1 NS8-V1 NS5- V1/V2 NS5-M-V2 Dimensions (W×H×D) 315 x 241 x 48.5 mm 232 x 177 x 48.5 mm 195 × 142 × 54 mm Effective display area 12.1 inch 10.4 inch 8 inch 5.7 inch Display device TFT STN/TFT Monochrome STN Number of dots 800 x 600 dots 640 x 480 dots 320 x 240 dots Display color 256 colors 16 shades of gray BMP/JPEG Display Color Video Display Color Screen Capacity 32,768 color 4,096 / 32,768 colors - 260,000 colors - - 60 Mbytes USB Port ○ ○ ○ ○ ○ Memory Card ○ ○ ○ ○ ○ Ladder Monitor function ○ ○ ○ - - Video Input Unit support ○ ○ ○ - - Control Link Interface Unit Support ○ ○ - - - PictBridge ○ ○ ○ ○ (see note) ○ (see note) Note: PictBridge is supported for NS5-[]Q1[](B)-V2 model only. What's New A New Way to Get Connected! Enhance Flexibility with Ethernet/IP Omron’s NS Series now supports Ethernet/IP connectivity. It uses direct addressing to monitor the PLC, which is much easier than before. With this new Ethernet/IP connectivity, symbols can be used in the CX-Designer to be defined as the points to monitor, which in return enables flexible addressing in NS as NS refers to symbol-address mapping table for addresses referring. Thus, if the address in the PLC is modified, users do not have to go through the hassle to scan through the screen data to change PLC addressing like before. Evidently saving cost in development and troubleshooting. PictBridge - Solution for Printing Omron’s NS series now supports PictBridge function for screen printing function. If you have a PictBridged-enabled printer, you can now print any screens that are displayed on your NS by simply just connecting a USB cable from NS to your printer. Better Connectivity Omron’s NS series supports Multi vendor connectivity. Connection to common brand is available, please refer to the table below. Brand Host Omron Host link: C/CPM/CQM/CV/CVM/CP1/CS/CJ PLC NT Link : 1:1, 1:N Ethernet/Ethernet/IP Omron Temperature Controller: EJ1/E5[]N/E5[]R Series Omron Inverter: 3G3MV, 3G3JV Mitsubishi A Series FX Series Q/QnA Series Siemens S7-300 Series (See note) Rockwell SLC 500 Series MicroLogix Series ControlLogix Series CompactLogix Series PLC-5 Series Note: Siemens’s HMI adapter is needed, please refer to manual W092 for more information. Enhanced Graphic Libraries Omron now includes new graphical libraries to for user development, more bitmaps symbols are included than before, giving users the luxury of having more choices for their screen developments. Features Smart Platform A Smarter Way to Monitor Your System NS Programmable terminal, inherited with the features of the Smart Platform, enables easy navigation of the system with the connectivity of your choice. The NS Programmable Terminal is able to connect to multiple PLCs via Serial Network, Ethernet Network or Controller Link Network. With the connection to the network, it enables the user to perform remote maintenance. Uploading and downloading of files and programs can also be done from the control room. One-Minute Concept of Smart Platform The NS comes with Smart Active Parts which is an Active-X like component, with built-in intelligence that enables communication directly to devices without having to develop any Ladder Logic program specifically to monitor or control a device. This helps to shorten the engineering time for development of the screen data and programming logic. Users only have to drag and drop their choice of device to monitor from the Smart Active Parts library, thus the terminology “One-Minute Concept”. SAP download is downloadable for free! Download the latest versions or new parts! (Exclusively for registered customer who purchased Omron software). Visit our software registration section for more details. Continuous Enhancing of Omron Networking Capabilities In addition to the existing Smart Platform capabilities, introducing the new communication standard included into NS Programmable Terminal, Ethernet/IP connectivity. The new Ethernet/IP networking enables easy communication between nodes in the PLC network. Facilitated with the symbolic address, access to PLC is much more flexible. Reduce Downtime with NS Maintenance Features Need a Speedy Recovery? Easy troubleshooting Guide with NS! Enhance your Step Guide with Multi-Language Users are able to change the display language by just a push of a button. During the creation of the screen data, select the appropriate language type and key in the text. When the language type is selected, all labels in the NS project will switch to the appropriate display language type. SAP Troubleshooter Function Hassle free, no programming needed. The user can create troubleshooting screen in 1 minute! Step 1: Drag from Library to Screen, Step 2: Configure the SAP, Step 3: Download to NS and start using. Advanced Troubleshooting Features Without a computer or down on battery? Need to read/modify the Ladder Logic Program? Use the Ladder Monitor feature innate in NS. Just download the program together with the screen data and you will be able to read the program on screen. ** Memory card needed for 5.7 inch model In addition, users can also use the Switchbox function and Device Monitor Function found in the System Manual. The Switchbox function acts as a mini Mimic which helps to summarize related IO information in one screen for simple monitor and control. The Device Monitor Function serves as a watch window for you to monitor and control multiple hosts in one screen. . time, thus cutting man-hour cost. Models Available Features NS12- V1 NS10- V1 NS8- V1 NS5- V1/V2 NS5- M-V2 Dimensions (W×H×D) 315 x 241 x 48.5 mm 232 x 177. NS5 / NS8 / NS10 / NS12 NS Series Advanced Programmable Terminals * Ordering information