Drawings and Specifications

1 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Drawings and Specifications Patching ProPatch ™ Programmable Series 170 Longframe Audio Products 172 Bantam Audio Products 173 Video Products 175 ICON Systems I-W Wall-Mount System 177 Bulkhead Panels 182 F Connector Bulkhead Panels 188 Wall-Mount Panels 189 Audio Products 191 Connectors and Accessories Component Audio Products 196 MUSA-Series jacks and Accessories 199 Video Products 200 75 Ohm Connectors 206 ProAx ™ Triaxial Camera Connectors 214 RF Signal Management RF Worx ® SignalOn ® Passives 218 RF Worx ® Satellite Splitters/Combiners 220 RF Worx ® SignalOn ® Actives 221 3/06 • 102117AE Broadcast Products 2 www.adc.com • +1-952-938-8080 • 1-800-726-4266 Drawings and Specifications ProPatch ™ Programmable Series PPP1248 Chassis and AMI-BAN Module in all Chassis Configurations ELECTRICAL Contact Resistance: 0.020 Ohm maximum (initial) 0.020 Ohm maximum (after life cycling) 0.10 Ohm maximum (after salt spray) Insulation Resistance: 10,000 megohms minimum (initial) 1,000 megohms minimum (after moisture resistance test) Dielectric Withstanding: Voltage: 500 Vac Contact Rating: Maximum: 100 mA + 130 Vdc; Minimum: -40 dBm MECHANICAL Mechanical Shock: Per MIL-STD-202F, Method 213B, test condition H Vibration: MIL-STD-1344, Method 2005, test condition I Insertion Force: 7 lbs. (3.17 kg) maximum Withdrawal Force: 1.5 lbs. (.679 kg) minimum Life: 20,000 insertion/withdrawal cycles minimum ENVIRONMENTAL Operating Temp: -40°C to 65°C Storage Temp: -55°C to 85°C Thermal Shock: Per MIL-STD-202F, Method 107G, test condition A Operating Humidity: 0% to 95% (no condensation) Storage Humidity: 0% to 95% (no condensation) Salt Spray: Per MIL-STD-202F, Method 101D Moisture Resistance: Per MIL-STD-202F, Method 106E MATERIALS Chassis Frame: Steel, zinc plated with electroless nickel plating Bantam Frame: Steel with black zinc chromate plating Unreinforced polyetherimide resin rated UL 94-V0 for flammability Springs: Nickel-silver Contacts: WECO No. 1 gold crossbar alloy welded to springs PC Boards: FR-4 Sockets: Phosper bronze 30 micro inches gold on contact Switches: Copper alloy 10 micro inches minimum gold on contact 17.40" 4.252" .673" 1.25" .090" 18.32" 19.00" 1.72" Front View (Shown without Jack Modules) Top View Jack Module 3/06 • 102117AE Broadcast Products 3 www.adc.com • +1-952-938-8080 • 1-800-726-4266 Drawings and Specifications ProPatch ™ Programmable Series .67" 4.63" 17.38" 1.72" 18.98" 18.30" 1.25" POS. 1 POS. 25 POS. 24 POS. 48 Chassis ground Isolation ground .672" 4.626" 17.380" 1.718" 18.980" 18.300" 1.250" POS 33 POS 64 POS 1 POS 32 Chassis ground Isolation ground Typical 1RU 24-Position EDAC 90 Rear View Front View Top View Typical 1RU 32-Position EDAC 120 Rear View Front View Top View 3/06 • 102117AE Broadcast Products 4 www.adc.com • +1-952-938-8080 • 1-800-726-4266 Drawings and Specifications Standard Pro Patch Longframe Audio Products .625" 17.08" 19.00" 18.32" POS 25 POS 1 1.35" 1.72" 1.25" .625" center to center longframe jack spacing POS 48 Designation strips, .226"H x 8.375"L x 2"W (16.75" inches total ) POS 24 .240" Typical 1 RU 2x24 Longframe Audio Panel Dimensions 18.32" 19.00" 3.00" 3.47" POS 1 POS 27 POS 26 POS 52 Designation strips, height .60", length 8.56" x 2 (17.12" total) .625" center to center longframe jack spacing Typical 2 RU 2x26 Longframe Audio Panel Dimensions This section presents drawings and specifications for typical products. For additional information or for information about products not presented here, please see the ADC web site at ADC.com or consult our Technical Assistance Center. 3/06 • 102117AE Broadcast Products 5 www.adc.com • +1-952-938-8080 • 1-800-726-4266 Drawings and Specifications Standard Pro Patch Bantam Audio Products Typical 1 RU 2x48 Regular Spaced Bantam Audio Panel Dimensions 3.47 3.00 19.00 18.31 Front View Horizontal Designation Windows and Strips Horizontal Designation Windows and Strips Front View 19.00 18.31 1.25 .75 .25 X .44 Jack spacing .312" inch center to center Typical 2 RU 2x48 Regular Spaced Bantam Audio Panel Dimensions 3/06 • 102117AE Broadcast Products 6 www.adc.com • +1-952-938-8080 • 1-800-726-4266 Drawings and Specifications Standard Pro Patch Bantam Audio Products Typical 1 RU 2x48 Regular Spaced Bantam Audio Panel Dimensions 3.47 3.00 19.00 18.31 Front View Horizontal Designation Windows and Strips Horizontal Designation Windows and Strips Front View 19.00 18.31 1.25 .75 .25 X .44 Jack spacing .312" inch center to center Typical 2 RU 2x48 Regular Spaced Bantam Audio Panel Dimensions 3/06 • 102117AE Broadcast Products 7 www.adc.com • +1-952-938-8080 • 1-800-726-4266 Drawings and Specifications Video Products PPE Series 1 Rack Unit 1.5 Rack Unit 2 Rack Unit 3 Rack Unit 1.250" 1.718" 2 Rows 2.593" 1.250" 3.468" 3.000" 5.218" 1.250" 1.250 4.750" 1.718" 1.250" 1 Row Midsize spacing: 0.520” center to center Standard size spacing: 0.625” center to center 3/06 • 102117AE Broadcast Products 8 www.adc.com • +1-952-938-8080 • 1-800-726-4266 Drawings and Specifications Video Products PPI Series Jacks Type MVJ-3 and MVJ-3T Jacks Type CJ3014N and CJ4014N / CJ3014N-75 and CJ4014N-75 3.47" 3.00" 19.00" 18.31" Designation Strips height .60", length 8.25" x 2 (16.5" total) for 2 RU video panels Midsize jack spacing .520" center to center between jacks Typical 2 RU Series 2x32 Midsize Video Panel Dimensions CK CABLE SUPPORT BAR 17.12 8.93 .075 7.2 (ADJUSTABLE FROM 7.2 TO 5.2) WSI Top View 1.72" 19.00" POSITION OF HORZ DESIGNATION CARDS AND WINDOWS 18.31" 1.25" Typical 1 RU 2x32 Midsize Video Panel Dimensions Typical 2 RU 2x32 Midsize Video Panel Dimensions 2.58" 18.312" 19.00" 1.25" 1.25" .228" .228" Typical 1.5 RU 2x32 Midsize Video Panel Dimensions 3.47 3.00 19.00 18.31 .625 Position 1 Position 24 Typical 2 RU 2x24 Standard Size and MUSA Video Panel Dimensions 19.00 18.31 Jack Port .625 .63 Position of Horizontal Designation Strips and Windows .25 x .44 Position 1 Position 26 Typical 1 RU 2x26 Standard Size and MUSA Video Panel Dimensions 3/06 • 102117AE Broadcast Products 9 www.adc.com • +1-952-938-8080 • 1-800-726-4266 15.0 18.75 37.5 3.13 maximum 1.53 minimum 37.5 15.0 16.00 15.00 .50 18.75 37.50 38.50 .50 3.50 4.15 Mounting hole pattern for wall mount panels I-W-MKIV Panel Drawings and Specifications ICON ® I-W Modular Wall-Mount System J1 J9 J17 J2 J10 J18 J3 J11 J19 J4 J12 J20 J5 J13 J21 J6 J14 J22 J7 J15 J23 J8 J16 J24 Cable tie buttons .156 diameter 75 BNC Bulkhead Feedthru connectors (24) Markings appear on both sides of panel 4.90 8.75 6.75 1.00 5.40 See detail “A” Screws are shown for references only (included in kit) Detail “A” Scale 2.000 Typical (24) places Panel Insulator Nut Lock washer BNC to BNC Insulator BNC and BNC to F Wall-Mount Block 3/06 • 102117AE Broadcast Products 10 www.adc.com • +1-952-938-8080 • 1-800-726-4266 Drawings and Specifications ICON ® I-W Modular Wall-Mount System F Wall-Mount Block J1 J9 J17 J2 J10 J18 J3 J11 J19 J4 J12 J20 J5 J13 J21 J6 J14 J22 J7 J15 J23 J8 J16 J24 Cable tie buttons .156 Diameter Markings appear on both sides of the panel 5.08 1.08 .25 5.40 1.50 8.00 5.90 5.00 See detail “A” Detail “A” Lock washer Insulator washer Panel “F” Connector Insulator washer [...]... 1-800-726-4266 26 Drawings and Specifications ICON® Audio Products 4.00" 8.24" Broadcast Products 6.00" 17.90" 16.90" 16.30" 102117AE 34.59" 3/06 • 16.80" 25" ICON I-WS-MKIV Wall-Mount Audio Frame Dimensions www.adc.com • +1-952-938-8080 • 1-800-726-4266 27 Drawings and Specifications Component Audio Products PJ339 and PJ482 Longframe Audio Jack Specifications ELECTRICAL Contact Resistance: Dielectric Withstanding:... REFERENCE SCHEMATIC REFERENCE SCHEMATIC AJ339 AJ238 S www.adc.com • +1-952-938-8080 • 1-800-726-4266 30 Drawings and Specifications MUSA-Series Jacks and Accessories SMJ Series MUSA Single Coaxial Jacks to BNC Specifications The SMJ family is rated to handle analog and digital video data rates up to and including HD 1.485 Gbps 75 Ohms nominal > 17 dB; 300 KHz to 2.4 GHz 10 milliohms typical MECHANICAL... 467" 281" 550" CJ2020-N75 CJ2020-N75FF www.adc.com Dimensions for CJ2020N-75 and CJ2011N (except CJ2011N has no termination can) • +1-952-938-8080 Dimensions for CJ2020-N75FF • 1-800-726-4266 32 Drawings and Specifications Video Products SJ2000 Switching Coaxial Jack Specifications The SJ2000 family is rated to handle analog and digital video data rates up to 360 Mbps Broadcast Products ELECTRICAL Insertion... 3.370 REF 625REF 600REF 305REF www.adc.com LOCATION OF ADC CATALOG NUMBER • +1-952-938-8080 • 1-800-726-4266 35 Drawings and Specifications Video Products CJ Series Midsize Single Coaxial Jacks to BNC Specifications The SJ2000 family is rated to handle analog and digital video data rates up to and including 360 Mbps Broadcast Products ELECTRICAL Characteristic Impedance: Return Loss: Contact Resistance:... +1-952-938-8080 • 1-800-726-4266 562 28 Drawings and Specifications Component Audio Products PJ839 and PJ889 Bantam Audio Jack Specifications ELECTRICAL Contact Resistance: 0.020 Ohm maximum (initial) 0.020 Ohm maximum (after life cycling) 0.10 Ohm maximum (after salt spray) 10,000 megohms minimum (initial) 1,000 megohms minimum (after moisture resistance test) Dielectric Withstanding: Voltage: Contact Rating:... POSITION HORIZONTAL DESIGNATION CARDS AND WINDOWS 3.00" 3.47" 18.31" 19.00" VI-32-BK www.adc.com • +1-952-938-8080 • 1-800-726-4266 15 Drawings and Specifications Video ICON® Bulkhead Panels 19" (48.26 cm) Panels HORIZONTAL DESIGNATION STRIPS CARDS AND WINDOWS INCLUDED (2) 25" X 44" SLOT (TYP) 1.25" 3.47" 50" 18.31" 19.00" VI-32-DES-W HORIZONTAL DESIGNATION STRIPS CARDS AND WINDOWS INCLUDED (2) 25" X 44"... Characteristic Impedance: Return Loss: Contact Resistance: 34.874 mm 1.373" 15.875 mm 625" 41.910 mm 1.650" www.adc.com • +1-952-938-8080 • 1-800-726-4266 31 Drawings and Specifications Video Products CJ2014N and CJ2020N-75 (terminated) Standard Size Coaxial Video Jack Specifications 62.5 Ohm nominal > -20 dB; 1 MHz to 2 GHz 0.030 Ohm maximum change post environment MECHANICAL Mechanical Shock: Vibration: Insertion... +1-952-938-8080 • 1-800-726-4266 20 Drawings and Specifications Video ICON® Wall-Mount Panels 4.15" 5.42" 3.50" 4.15" BNC BULKHEAD CONNECTORS 102117AE Broadcast Products VIW-424 3.50" VIW-408 16.00" 50" 50" 15.00" 16.00" 33.00" 16.00" 3/06 • 25" DIA TYP Video ICON VIW-424/408 Wall-Mount Panel Dimensions www.adc.com • +1-952-938-8080 • 1-800-726-4266 21 Drawings and Specifications Video ICON® Wall-Mount... 102117AE 05 1.265" 05" 2.83" 3.457" SJ2000N-75F Modified F-connection Switching Coaxial Video Jack www.adc.com • +1-952-938-8080 • 1-800-726-4266 34 Drawings and Specifications Video Products SVJ-2x Standard Size Video Super Jack Specifications ELECTRICAL Rated Bandwidth: Return Loss: Characteristic Impedance: Insertion Loss: Center Conductor Diameter: Contact Resistance: Termination Resistor: 2.4 GHz Better... Cable tie buttons • 1-800-726-4266 12 Drawings and Specifications Video ICON® Wall-Mount Panels 25" 5.40" 7 FEEDTHRU CABLE TIE BUTTONS 1.50" 8.00" 102117AE Broadcast Products 5.00" 1.08" 5.08" 156" DIA 5.90" VIW-8 25" 5.40" CABLE TIE BUTTONS 1.50" 5.00" 8.00" 1.08" 2.575" • 156" DIA 3/06 5.90" VIW-24 www.adc.com • +1-952-938-8080 • 1-800-726-4266 13 B Drawings and Specifications Video ICON® Bulkhead . www.adc.com • +1-952-938-8080 • 1-800-726-4266 Drawings and Specifications ProPatch ™ Programmable Series PPP1248 Chassis and AMI-BAN Module in all Chassis Configurations. Broadcast Products 4 www.adc.com • +1-952-938-8080 • 1-800-726-4266 Drawings and Specifications Standard Pro Patch Longframe Audio Products .625" 17.08"