1. Trang chủ
  2. » Kinh Tế - Quản Lý

Material Safety Data Sheet: White paint MP-35

9 264 6

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 9
Dung lượng 334,94 KB

Nội dung

Material Safety Data Sheet: White paint MP-35 includes chemical productand company identification, hazard identification, composition informationon ingredients ingredients cas number; firstaid procedures of the White paint MP-35.

Material Safety Data Sheet PAGE PRODUCT NAME WHITE PAINT MP-35 ( /9) SECTION CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Identity (Trade Name As Used On Label); WHITE PAINT MP-35 Recommended use of the chemical and restrictions on use; White Paint for Detecting Magnetic Particle Manufacturer Name /Address: NAMBANG CNA CO., LTD /392-3 Chupal-ri, Paengsung-Eup, Pyongtaek-si, Kyonggi-do, KOREA 451-805 TEL: 8231 651 5911-8 FAX: 8231 691 6441 /8231 Date Prepared; May 06 2009 SECTION HAZARD IDENTIFICATION Hazard Class Hazard Class Hazard category Flammable aerosols Flammable liquids Skin corrosion/irritation Eye damage/irritation Toxic to reproduction 1A Specific target organ toxicity (Single exposure) Specific target organ toxicity (Single exposure) 3(Respiratory tract irritation) Specific target organ toxicity (Repeated exposure) Aspiration hazard Hazardous to the aquatic environment hazard Chronic GHS label elements, including precautionary statements Category Indication Symbol ~~¢ Signal word Danger Hazard statement - Extremely flam m able aerosol Highly flammable liquid and vapour Causes skin irritation Causes serious eye irritation May damage fertility or the unborn child 6586441 PRODUCT NAME WHITE PAINT MP-35 PAGE (2I9) - Prevention Precautionary statements Response Storage Disposal May cause respiratory irritation Causes damage to organs through prolonged or repeated exposure May be harmful if swallowed and enters airways Harmful to aquatic life with long lasting effects Keep away from heat/sparks/open flames/hot surfaces -No smoking - Do not spray on an open flame or other ignition source - Pressurized container: Do not pierce or burn, even after use - Wash thoroughly after handling - Keep container tightly closed - Ground/Bond container and receiving equipment - Use explosion-proof electrical/ventilating/lighting/ ./equipment - Use only non-sparking tools - Take precautionary measures against static discharge - Wear protective gloves/eye protection/face protection - Obtain special instructions before use - Do not handle until all safety precautions have been read and understood - Use personal protective equipment as required - Avoid breathing dust/fume/gas/mist/vapours/spray - Use only outdoors or in a well-ventilated area - Do not breathe dust/fume/gas/mist/vapours/spray - Do not eat, drink or smoke when using this product - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing Rinse skin with water/shower - In case of fire: Use for extinction - IF ON SKIN: Wash with plenty of soap and water - Specific treatment (see on this label) - If skin irritation occurs: Get medical advice/attention - Take off contaminated clothing and wash before reuse - IF IN EYES: Rinse cautiously with water for several minutes Remove contact lenses, if present and easy to Continue rinsing - If eye irritation persists: Get medical advice/attention - IF exposed or concerned: Get medical advice/attention - IF INHALED: Remove victim to fresh air and keep at rest in a position com fortable for breathing - Call a POISON CENTER or doctor/physician if you feel unwell - Get medical advice/attention if you feel unwell - IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician - Do NOT induce vomiting - IF exposed: Call a POISON CENTER or doctor/physician - Protect from sunlight Do not expose to tem peratures exceeding 50 "C/122 2F - Store locked up - Store in a well-ventilated place Keep container tightly closed Dispose of contents/container to ···in accordance with local/regional /national/ international regulations (to be specified) Other hazards which not result in classification NFPA Rating I Health Flammability Reactivity PRODUCT NAME PAGE WHITE PAINT MP-35 ( 3/9 ) Ingreolerm; Alkyd resin 1 Titanium oxide 0 Xylene Toluene Stabilizer - - Dimethyl ether SECTION COMPOSITION/INFORMATION ON INGREDIENTS INGREDIENTS CAS NUMBER % Hazardous - 5-15 - 13463-67-7 25-35 - Xylene 1330-20-7 5-15 Toluene 108-88-3 10-20 - Stabilizer S1

Ngày đăng: 08/02/2020, 00:31

TỪ KHÓA LIÊN QUAN