Test 3 (before class)

5/10/2018 Test (Before Class) Kiem thu phan mem_ 2018_2019_HKI_Sang_Thu6 Started on Friday, October 2018, 7:24 AM State Finished Completed on Friday, October 2018, 7:32 AM Time taken mins 52 secs Marks 40.00/40.00 Grade 10.00 out of 10.00 (100%) Question What type of testing will you perform on internet banking solution? Correct Mark 1.00 out of 1.00 Select one: a Requirements testing b Non-functional testing c Functional testing d System integration Your answer is correct Question Link Testing is also called as: Correct Mark 1.00 out of 1.00 Select one: a Maintenance testing b Component Integration testing c Component Sub System Testing d Component System Testing Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 1/17 5/10/2018 Question Test (Before Class) The _ Testing will be performed by the people at client own locations Correct Mark 1.00 out of 1.00 Select one: a Performance Testing b Field testing It is also known as beta testing It takes place at customer's site It sends the system to users who install it and use it under real - world working conditions c System Testing d Alpha testing Your answer is correct Question What type of testing is done to supplement the rigorous testing? Correct Mark 1.00 out of 1.00 Select one: a Error Guessing b Integration testing c System testing d Regression testing Your answer is correct Question Which of the following is not part of performance testing: Correct Mark 1.00 out of 1.00 Select one: a Measuring transaction rates b Simulating many users c Measuring response time d Generating many transactions e Recovery testing Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 2/17 5/10/2018 Question Integration testing in the large involves: Test (Before Class) Correct Mark 1.00 out of 1.00 Select one: a Combing software components and testing them in one go b Testing the system when combined with other systems c Testing a system with a large number of users d Testing a sub-system using stubs and drivers Your answer is correct Question In system testing Correct Mark 1.00 out of 1.00 Select one: a Both functional and non-functional requirements are to be tested b Only requirements which are listed in the specification document are to be tested c Only non-functional requirements are tested; functional requirements are validated in a review d Only functional requirements are tested; non-functional requirements are validated in a review Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 3/17 5/10/2018 Question Test (Before Class) Which test can be performed at all test levels? Correct Mark 1.00 out of 1.00 Select one: a System testing b Structural testing c Operational testing d Integration testing Your answer is correct Question Correct Mark 1.00 out of Testing where in we subject the target of the test, to varying workloads to measure and evaluate the performance behaviors and ability of the target and of the test to continue to function properly under these different workloads 1.00 Select one: a System Testing b Integration Testing c Usability Testing d Load Testing Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 4/17 5/10/2018 Question 10 Test (Before Class) Which of the following is a form of functional testing? Correct Mark 1.00 out of 1.00 Select one: a Performance testing b Security testing c Usability testing d Boundary value analysis Your answer is correct Question 11 Contract and regulation testing is a part of Correct Mark 1.00 out of 1.00 Select one: a Smoke testing b System testing c Acceptance testing d Integration testing Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 5/17 5/10/2018 Question 12 Test (Before Class) System Integration testing should be done after Correct Mark 1.00 out of 1.00 Select one: a Component integration testing b System testing c Integration testing d Unit testing Your answer is correct Question 13 Acceptance testing means Correct Mark 1.00 out of 1.00 Select one: a Testing after changes have been made to ensure that no unwanted changes were introduced b Users test the application in the developers environment c Testing performed on a single stand - alone module or unit of code d Testing to ensure that the system meets the needs of the organization and end user Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 6/17 5/10/2018 Question 14 Test (Before Class) Which of the following are characteristic of regression testing? Correct i) Regression testing is run ONLY once Mark 1.00 out of ii) Regression testing is used after fixes have been made 1.00 iii) Regression testing is often automated iv) Regression tests need not be maintained Select one: a iii b ii, iii c i, iii, iv d ii, iv Your answer is correct Question 15 Arc testing is known as Correct Mark 1.00 out of 1.00 Select one: a Ad-hoc testing b Beta testing c Branch testing d Agile testing Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 7/17 5/10/2018 Question 16 A regression test: Test (Before Class) Correct Mark 1.00 out of 1.00 Select one: a Will always be automated b Will help ensure unchanged areas of the software have not been affected c Can only be run during user acceptance testing d Will help ensure changed areas of the software have not been affected Your answer is correct Question 17 Which of the following is a type of non-functional testing? Correct Mark 1.00 out of 1.00 Select one: a Statement Coverage b Cause-effect graphing c Usability testing d Dataflow testing Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 8/17 5/10/2018 Question 18 Test (Before Class) Which test may not mimic real world situations Correct Mark 1.00 out of Select one: 1.00 a None of the above b Structural Testing c All of the above d Functional testing Your answer is correct Question 19 Which test investigates both functional and non-functional system requirements? Correct Mark 1.00 out of Select one: 1.00 a System testing b Alpha testing c Confirmation testing d Acceptance testing Your answer is correct Question 20 The process starting with the terminal modules is called: Correct Mark 1.00 out of 1.00 Select one: a Module integration b Bottom-up integration c Top-down integration d None of the above Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 9/17 5/10/2018 Question 21 Correct Mark 1.00 out of Test (Before Class) During this event the entire system is tested to verify that all functional information structural and quality requirements have been met A predetermined combination of tests is designed that when executed successfully satisfy management that the system meets specifications 1.00 Select one: a Integration Testing b User Acceptance Testing c Validation Testing d System Testing Your answer is correct Question 22 System testing should investigate Correct Mark 1.00 out of 1.00 Select one: a Functional requirements only not non-functional requirements b Non-functional requirements and Functional requirements c Non-functional requirements only not Functional requirements d Non-functional requirements or Functional requirements Your answer is correct Question 23 Which of the following combinations correctly describes a valid approach to component testing: Correct i) Functional testing of the component in isolation Mark 1.00 out of ii) Structure-based testing of the code without recording incidents 1.00 iii) Automated tests that are run until the component passes iv) Functional testing of the interfaces between modules Select one: a I, ii and iii b iii c ii and iv d i and ii Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 10/17 5/10/2018 Question 24 Test (Before Class) Which of the following defines the expected results of a test? Correct Mark 1.00 out of 1.00 Select one: a Test procedure specification b Test design specification c Test case specification d Test results Your answer is correct Question 25 Correct Mark 1.00 out of Performs sufficient testing to evaluate every possible path and condition in the application system The only test method that guarantees the proper functioning of the application system is called as _ 1.00 Select one: a Exhaustive Testing b Regression Testing c Branch Testing d Basic Path Testing Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 11/17 5/10/2018 Question 26 Correct Mark 1.00 out of 1.00 Test (Before Class) To test a function, the programmer has to write a , which calls the function and passes it the test data Select one: a None of the above b Proxy c Stub d Driver Your answer is correct Question 27 Which is the best definition of complete testing: Correct Mark 1.00 out of 1.00 Select one: a You have discovered every bug in the program b You have completed every test in the test plan c You have reached the scheduled ship date d You have tested every statement, branch, and combination of branches in the program Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 12/17 5/10/2018 Question 28 Which is the non - functional testing? Test (Before Class) Correct Mark 1.00 out of 1.00 Select one: a Unit testing b Regression testing c Performance testing d Sanity testing Your answer is correct Question 29 Which is not a Component testing Correct Mark 1.00 out of Select one: 1.00 a Check the memory leaks b Check the robustness c Check the branch coverage d Check the decision tables Your answer is correct Question 30 Which of the following is a test type? Correct Mark 1.00 out of 1.00 Select one: a Component Testing b Functional Testing c System Testing d Acceptance Testing Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 13/17 5/10/2018 Question 31 The purpose of exit criteria is Test (Before Class) Correct Mark 1.00 out of 1.00 Select one: a Define when to stop testing b All of the above c End of test level d When a set of tests has achieved a specific pre condition Your answer is correct Question 32 What is beta testing? Correct Mark 1.00 out of 1.00 Select one: a Testing performed by potential customers at the developers location b Testing performed by product developers at their own locations c Testing performed by potential customers at their own locations d Testing performed by product developers at the customer's location Your answer is correct Question 33 Component Integration Testing can be done Correct Mark 1.00 out of 1.00 Select one: a After unit testing b After system testing c After component testing d Before Integration Testing Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 14/17 5/10/2018 Question 34 Regression testing should be performed: Correct i Every week Mark 1.00 out of ii After the software has changed 1.00 Test (Before Class) iii As often as possible iv When the environment has changed v When the project manager says Select one: a ii & iv are true, i, iii & v are false b ii, iii & iv are true, i & v are false c ii is true, i, iii, iv & v are false d i & ii are true, iii, iv & v are false Your answer is correct Question 35 The _ testing will be performed by the people at client own locations Correct Mark 1.00 out of 1.00 Select one: a Field testing b Performance testing c System testing d Alpha testing Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 15/17 5/10/2018 Question 36 Test (Before Class) Which test ensures that modifications did not introduce new problems? Correct Mark 1.00 out of 1.00 Select one: a Stress testing b Black-box testing c Regression testing d Structural testing Your answer is correct Question 37 Functional testing is mostly: Correct Mark 1.00 out of 1.00 Select one: a Both of the above b Validation techniques c None of the above d Verification techniques Your answer is correct Question 38 Link Testing is also called as : Correct Mark 1.00 out of 1.00 Select one: a Component System Testing b Component Sub System Testing c Component Integration testing d Maintenance testing Your answer is correct https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 16/17 5/10/2018 Question 39 Correct Mark 1.00 out of 1.00 Test (Before Class) During testing, a defect was found in which the system crashed when the network got disconnected while receiving data from the server The defect was fixed by correcting functionality which checks the network availability during data transfer Existing test cases did cover 100% of the module statements To verify the fix and ensure more extensive coverage, some tests were designed and added to the test suite What types of testing are mentioned above? I Functional testing II Structural testing III Confirmation testing IV Performance testing Select one: a I, II and III b I and III c I, III and IV d II and IV Your answer is correct Question 40 What is the purpose of exit criteria? Correct Mark 1.00 out of 1.00 Select one: a To define when a test level is complete b To identify when a software system should be retired c To determine when a test has completed d To determine whether a test has passed Your answer is correct Return to: Week (05/10)  https://lms.hcmute.edu.vn/mod/quiz/review.php?attempt=786776 17/17 ... 12 Test (Before Class) System Integration testing should be done after Correct Mark 1.00 out of 1.00 Select one: a Component integration testing b System testing c Integration testing d Unit testing... Which is the non - functional testing? Test (Before Class) Correct Mark 1.00 out of 1.00 Select one: a Unit testing b Regression testing c Performance testing d Sanity testing Your answer is correct... Question 36 Test (Before Class) Which test ensures that modifications did not introduce new problems? Correct Mark 1.00 out of 1.00 Select one: a Stress testing b Black-box testing c Regression testing