IT training linux web server and domain configuration

Linux Web Server and Domain Configuration Tutorial Page of 23 Prerequisites: This tutorial assumes that a computer has Linux installed and running See RedHat Installation for the basics A connection to the internet is also assumed A connection of 128 Mbits/sec or greater will yield the best results ISDN, DSL, cable modem or better are all suitable A 56k modem will work but the results will be mediocre at best The tasks must also be performed with the root user login and password Software Prerequisites: The Apache web server (httpd), FTP (requires xinetd or inetd) and Bind (named) software packages with their dependencies are all required One can use the rpm command to verify installation: Fedora Core 1+, Red Hat Enterprise 4, CentOS 4: rpm -q httpd bind bind-chroot bind-utils system-config-bind xinetd vsftpd RPMs added FC2+: system-config-httpd RPMs added FC3+: httpd-suexec Red Hat 9.0 rpm -q httpd bind xinetd vsftpd A Red Hat 8.0 wu-ftpd RPM may be installed (Newer version 2.6.2 or later with security fix wu-ftpd-2.6.2-11+) or install from source Red Hat 8.0 rpm -q httpd bind xinetd wu-ftpd Red Hat 7.x: rpm -q apache bind inetd wu-ftpd Use wu-ftpd version 2.6.2 or later to avoid security problems SuSE 9.3: rpm -ivh apache2 apache2-prefork bind bind-chrootenv bind-utils vsftpd Note: The apache2-MPM is a generic term for Apache installation options for "Multi-Processing Modules (MPM)s "prefork" or "worker" If you try and only apache2 you will get the following error: apache2-MPM is needed by apache2-2.0.53-9 Also see Apache.org: MPMs Ubuntu (dapper 6.06) / Debian: apt-get apt-get apt-get apt-get apt-get apt-get install install install install install install apache2 apache2-common apache2-mpm-prefork apache2-utils bind9 vsftpd One should also have a working knowledge of the Linux init process so that these services are initiated upon system boot See the YoLinux init process tutorial more info Apache HTTP Web server configuration: This tutorial is for the Apache HTTP web server (Version 1.3 and 2.0) See the YoLinux list of Linux HTTP servers for a list of other web servers for the Hyper Text Transport Protocol The Apache configuration file is: /etc/httpd/conf/httpd.conf Web pages are served from the directory as configured by the DocumentRoot directive The default directory location is: Red Hat 7.x-9, Fedora Core, Red Hat Enterprise 4, CentOS 4: /var/www/html/ Red Hat 6.x and older: /home/httpd/html/ Suse 9.x: /srv/www/htdocs/ Ubuntu (dapper 6.06) / Debian: /var/www/html The default home page for the default configuration is index.html Note the pages should not be owned by user apache as this is the process owner of the httpd web server daemon If the web server process is comprimised, it should not be allowed to alter the files The files should of course be readable by user apache Apache may be configured to run as a host for one web site in this fashion or it may be configured to serve for multiple domains Serving for multiple domains may be achieved in two ways: Virtual hosts: One IP address but multiple domains - "Name based" virtual hosting Multiple IP based virtual hosts: One IP address for each domain - "IP based" virtual hosting The default configuration will allow one to have multiple user accounts under one domain by using a reference to the user account: http://www.domain.com/~user1/ If no domain is registered or configured, the IP address may also be used: http://XXX.XXX.XXX.XXX/~user1/ http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page of 23 [Potential Pitfall] The default umask for directory creation is correct by default but if not use: chmod 755 /home/user1/public_html [Potential Pitfall] When creating new "Directory" configuration directives, I found that placing them by the existing "Directory" directives to be a bad idea It would not use the htaccess file This was because the statement defining the use of the htaccess file was after the "Directory" statement Previously in RH 6.x the files were separated and the order was defined a little different I now place new "Directory" statements near the end of the file just before the "VirtualHost" statements For users of Red Hat 7.1, the GUI configuration tool apacheconf was introduced for the crowd who like to use pretty point and click tools Files used by Apache: Start/stop/restart script: Red Hat/Fedora/CentOS: /etc/rc.d/init.d/httpd SuSE 9.3: /etc/init.d/apache2 Ubuntu (dapper 6.06) / Debian: /etc/init.d/apache2 Apache main configuration file: Red Hat/Fedora/CentOS: /etc/httpd/conf/httpd.conf SuSE: /etc/apache2/httpd.conf (Need to add directive: ServerName host-name) Ubuntu (dapper 6.06) / Debian: /etc/apache2/apache2.conf Apache suplementary configuration files: Red Hat/Fedora/CentOS: /etc/httpd/conf.d/component.conf SuSE: /etc/apache2/conf.d/component.conf Ubuntu (dapper 6.06) / Debian: Virtual domains: /etc/apache2/sites-enabled/domain (Create soft link from /etc/apache2/sites-enabled/domain to /etc/apache2/sites-available/domain to turn on) Additional configuration directives: /etc/apache2/conf.d/ Modules to load: /etc/apache2/mods-available/ (Soft link to /etc/apache2/mods-enabled/ to turn on) Ports to listen to: /etc/apache2/ports.conf /var/log/httpd/access_log and error_log - Red Hat/Fedora Core Apache log files (Suse: /var/log/apache2/) Start/Stop/Restart scripts: The script is to be run with the qualifiers start, stop, restart or status i.e /etc/rc.d/init.d/httpd restart A restart allows the web server to start again and read the configuration files to pick up any changes To have this script invoked upon system boot issue the command chkconfig add httpd See Init Process Tutorial for a more complete discussion Also Apache control tool: /usr/sbin/apachectl start Apache Control Command: apachectl: Red Hat / Fedora Core / CentOS: apachectl directive Ubuntu dapper 6.06 / Debian: apache2ctl directive Directive Description start Start the Apache httpd daemon Gives an error if it is already running stop graceful Stops the Apache httpd daemon Gracefully restarts the Apache httpd daemon If the daemon is not running, it is started This differs from a normal restart in that currently open connections are not aborted restart Restarts the Apache httpd daemon If the daemon is not running, it is started This command automatically checks the configuration files as in configtest before initiating the restart to make sure the daemon doesn't die status Displays a brief status report fullstatus Displays a full status report from mod_status Requires mod_status enabled on your server and a text-based browser such as lynx available on your system The URL used to access the status report can be set by editing the STATUSURL variable in the script configtest Run a configuration file syntax test -t Apache Configuration Files: /etc/httpd/conf/httpd.conf: is used to configure Apache In the past it was broken down into three files These may now be all concatenated into one file See Apache online documentation for the full manual /etc/httpd/conf.d/application.conf: All configuration files in this directory are included during Apache start-up Used to store application specific configurations /etc/sysconfig/httpd: Holds environment variables used when starting Apache Basic settings: Change the default value for ServerName www. Giving Apache access to the file system: It is prudent to limit Apache's view of the file system to only those directories necessary This is done with the directory statement Start by denying access to everything, then grant access to the necessary directories Deny access completely to file system root ("/") as the default: Options None AllowOverride None Grant access to a user's directory: http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page of 23 AllowOverride None order allow,deny allow from all Options Indexes Includes FollowSymLinks OR use the statement UserDir public_html which does this by default for every user account at $HOME/public_html Change to a comment (add "#" at beginning of line) from Fedora Core default UserDir disable Also use SELinux command: setsebool httpd_enable_homedirs true File permissions: The Apache web server daemon must be able to read your web pages in order to feed thier contents to the network Use an appropriate umask and file protection This works: chmod ugo+r -R public_html One may also use groups to control permisions See the YoLinux tutorial on managing groups [Potential Pitfall]: If the Apache web server can not access the file you will get the error "403 Forbidden" "You don't have permission to access file-name on this server." Note the default permissions on a user directory when first created with "useradd" are: drwx userx userx You must allow the web server running as user "apache" to access the directory if it is to display pages held there Fix with command: chmod ugo+rx /home/userx drwxr-xr-x userx userx SELinux security contexts: Fedora Core and Red Hat Enterprise Linux introduced SELinux (Security Enhanced Linux) security policies and context labels To view the security context labels applied to your web page files use the command: ls -Z The system enables/disables SELinux policies in the file /etc/selinux/config SELinux can be turned off by setting the directive SELINUX (Then reboot the system): SELINUX=disabled or using the command setenforce to temporarily disable SELinux until the next reboot When using SELinux security features, the security context labels must be added so that Apache can read your files The default security context label used is inherited from the directory for newly created files Thus a copy (cp) must be used and not a move (mv) when placing files in the content directory Move does not create a new file and thus the file does not recieve the directory security context label The context labels used for the default Apache directories can be viewed with the command: ls -Z /var/www The web directories of users (i.e public_html) should be set with the appropriate context label (httpd_sys_content_t) Assign a security context for web pages: chcon -R -h -t httpd_sys_content_t /home/user1/public_html Options: -R: Recursive Files and directories in current directory and all subdirectories -h: Affect symbolic links -t: Specify type of security context Use the following security contexts: Context Type Description Used for static web content i.e HTML web pages httpd_sys_script_exec_t Use for executable CGI scripts or binary executables httpd_sys_script_rw_t CGI is allowed to alter/delete files of this context httpd_sys_script_ra_t CGI is allowed to read or append files of this context httpd_sys_script_ro_t CGI is allowed to read files and directories of this context httpd_sys_content_t Set the following options: setsebool httpd-option true (or set to false) Policy Description Allow httpd cgi support httpd_enable_homedirs Allow httpd to read home directories httpd_ssi_exec Allow httpd to run SSI executables in the same domain as system CGI scripts Then restart Apache: Red Hat/Fedora/Suse and all System V init script based Linux systems: /etc/init.d/httpd restart Red Hat/Fedora: service httpd restart httpd_enable_cgi The default SE boolean values are specified in the file: /etc/selinux/targeted/booleans For more on SELinux see the YoLinux Systems Administration tutorial Configuring a "name based" virtual host: http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page of 23 A virtual host configuration allows one to host multiple web site domains on one server (This is not required for a dedicated linux server which hosts a single web site.) NameVirtualHost XXX.XXX.XXX.XXX ServerName www.your-domain.com - CNAME (bind DNS alias www) specified in Bind configuration file (/var/named/ ) ServerAlias your-domain.com - Allows requests by domain name without the "www" prefix ServerAdmin user1@your-domain.com DocumentRoot /home/user1/public_html ErrorLog logs/your-domain.com-error_log TransferLog logs/your-domain.com-access_log Notes: You can specify more than one IP address i.e if web server is also being used as a firewall/gateway and you have an external internet IP address as well as a local network IP address NameVirtualHost XXX.XXX.XXX.XXX NameVirtualHost 192.168.XXX.XXX See the YoLinux Tutorial on configuring a network gateway/firewall using iptables and NAT Use your IP address for XXX.XXX.XXX.XXX, actual domain name and e-mail address One can use DNS views to provide different local network DNS results Note that I configure Apache for both requests http://www.domain-name.com and http://domain-name.com Once virtual hosts are configured, your default system domain (/var/www/html) will stop working Your default domain now must be configured as a virtual domain This part remains the same # Add a VirtualHost definition for what was once the default ServerName www.your-domain.com ServerAlias your-domain.com ServerAdmin user1@your-domain.com DocumentRoot /var/www/html ErrorLog logs/error_log TransferLog logs/access_log Forwarding to a primary URL It is best to avoid the appearance of duplicated web content from two URLs such as http://www.your-domain.com and http://your-domain.com Supply a forwarding Apache "Redirect" # Add a VirtualHost definition to forward to your primary URL ServerName your-domain.com ServerAlias other-domain.com ServerAlias www.other-domain.com Redirect permanent / http://www.your-domain.com.com/ Note: This is to avoid Google ranking penalties See the Yolinux.com discussion on Google's suplemental index See the YoLinux.com Apache "Redirect" Tutorial More virtual host examples When specifying more domains, they may all use the same IP address or some/all may use their own unique IP address Specify a "NameVirtualHost" for each IP address After the Apache configuration files have been edited, restart the httpd daemon: /etc/rc.d/init.d/httpd restart (Red Hat) or /etc/init.d/apache2 restart (Ubuntu / Debian) Apache virtual domain configuration with Ubuntu 6.06 Dapper: Ububntu separates out each virtual domain into a separate configuration file held in the directory /etc/apache2/sites-available/ When the site domain is to become active, a soft link is created to the directory /etc/apache2/sites-enabled/ Example: /etc/apache2/sites-available/supercorp ServerName supercorp.com http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page of 23 ServerAlias www.supercorp.com ServerAdmin webmaster@localhost DocumentRoot /home/supercorp/public_html/home Options FollowSymLinks AllowOverride None Options Indexes FollowSymLinks MultiViews IndexOptions SuppressLastModified SuppressDescription AllowOverride All Order allow,deny allow from all ScriptAlias /cgi-bin/ /home/supercorp/cgi-bin/ AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all ErrorLog /var/log/apache2/supercorp.com-error.log # Possible values include: debug, info, notice, warn, error, # crit, alert, emerg LogLevel warn CustomLog /var/log/apache2/supercorp.com-access.log combined ServerSignature On Enable domain: Create soft link: Manually: ln -s /etc/apache2/sites-available/supercorp /etc/apache2/sites-enabled/supercorp Use Ubuntu scripts a2ensite/a2dissite Type command and it will prompt you as to which site you would like to enable or disable Restart Apache: apache2ctl graceful or /etc/init.d/apache2 restart or /etc/init.d/apache2 reload Also note that Apache modules can also be enabled/disabled with scripts a2enmod/a2dismod CGI: (Common Gateway Interface) CGI is a program executable which dynamically generates a web page by writing to stdout CGI is permitted by either of two configuration file directives: ScriptAlias: Red Hat 7.x-9, Fedora core: ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" Red Hat 6.x and older: ScriptAlias /cgi-bin/ "/home/httpd/cgi-bin/" Suse 9.x: ScriptAlias /cgi-bin/ "/srv/www/cgi-bin/" Ubuntu (dapper 6.06) / Debian: ScriptAlias /cgi-bin/ "/usr/lib/cgi-bin/" or Options +ExecCGI: Options +ExecCGI The executable program files must have execute privileges, executable by the process owner (Red Hat 7+/Fedora Core: apache Older use nobody) under which the httpd daemon is being run Configuring CGI To Run With User Privileges: The suEXEC feature provides Apache users the ability to run CGI and SSI programs under user IDs different from the user ID of the calling web-server Normally, when a CGI or SSI program executes, it runs as the same user who is running the web server NameVirtualHost XXX.XXX.XXX.XXX ServerName node1.your-domain.com ServerAlias your-domain.com www.your-domain.com ServerAdmin user1@your-domain.com DocumentRoot /home/user1/public_html/your-domain.com ErrorLog logs/your-domain.com-error_log TransferLog logs/your-domain.com-access_log - Allows requests by domain name without the "www" prefix - CNAME (alias www) specified in Bind configuration file (/var/named/ ) SuexecUserGroup user1 user1 Options +ExecCGI +Indexes AddHandler cgi-script cgi Configuring an "IP based" virtual host: One may assign multiple IP addresse to a single network interface See the YoLinux networking tutorial: Network Aliasing Each IP address may then be it's http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page of 23 own virtual server and individual domain The downside of the "IP based" virtual host method is that you have to possess multiple/extra IP addresses This usually costs more The standard name based virtual hosting method above is more popular for this reason NameVirtualHost * - Indicates all IP addresses ServerAdmin user0@default-domain.com DocumentRoot /home/user0/public_html ServerAdmin user1@domain-1.com DocumentRoot /home/user1/public_html ServerAdmin user1@domain-2.com DocumentRoot /home/user2/public_html The default block will be used as the default for all IP addresses not specified explicitly This default IP (*) may not work for https URL's ERROR Pages: You can specify your own web pages instead of the default Apache error pages: ErrorDocument 404 /Error404-missing.html Create the file Error404-missing.html in your "DocumentRoot" directory PHP: If the appropriate php, perl and httpd RPM's are installed, the default Red Hat Apache configuration and modules will support PHP content RPM Packages (RHEL4): php: HTML-embedded scripting language php-pear: PEAR is a framework and distribution system for reusable PHP components php-mysql: MySQL database support php-ldap: Lightweight Directory Access Protocol (LDAP) support Apache configuration: Add php default page index.php to apache config file: /etc/httpd/conf/httpd.conf DirectoryIndex index.html index.htm index.php PHP Configuration File: RHEL4 - PHP 4.3: /etc/php.ini Ubuntu Daper 6.06/6.11: /etc/php5/apache2/php.ini [PHP] engine = On display_errors = Off include_path = ".:/php/includes" memory_limit = 32M ; Default is typically 8MB which is too low [MySQL] mysql.default_host = superserver mysql.default_user = dbuser ; Hostname of the computer Small portion of file shown Note that changes will not take effect until the apache web server daemon is restarted Test you PHP capabilities with this test file: /home/user1/public_html/test.php OR (older format) Test: http://localhost/~user1/test.php For more info see YoLinux list of PHP information web sites http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page of 23 Running Multiple instances of httpd: The Apache web server daemon (httpd) can be started with the command line option "-f" to specify a unique configuration file for each instance Configure a unique IP address for each instance of Apache See the YoLinux Networking Tutorial to specify multiple IP addresses for one NIC (Network Interface Card) Use the Apache configuration file directive Listen XXX.XXX.XXX.XXX, where the IP address is unique for each instance of Apache Apache Man Pages: httpd - Apache Hypertext Transfer Protocol Server apachectl - Apache HTTP Server Control Interface ab - Apache HTTP server benchmarking tool htdigest - manage user files for digest authentication htpasswd - Manage user files for basic authentication logresolve - Resolve IP-addresses to hostnames in Apache log files rotatelogs - Piped logging program to rotate Apache logs Also see the local online Apache configuration manual: http://localhost/manual/ Apache Red Hat / Fedora Core GUI configuration: GUI configuration tool: Fedora Core 2/3/4: /usr/bin/system-config-httpd Red Hat 8/9, Fedora Core 1: /usr/bin/redhat-config-httpd Adding web site login and password protection: See the YoLinux tutorial on web site password protection Log file analysis: Scanning the Apache web log files will not provide meaningfull statistics unless they are graphed or presented in an easy to read fashion The following packages to a good job of presenting site statistics Analog - Also see Report Magic for Analog Webalizer AWStats - (requires PERL) Web site statistic services: eXTReMe Tracking Load testing your server: PureLoad - JAVA load testing and reporting tool WebPerformance Trainer - Load Testing Tools Apache Links: CgiWrap - setuid wrapper that allows users to install and execute their own cgi scripts that get executed as their own userid Thumbprint - CGI for viewing a directory of images as thumbnails WWWThreads.org - Commercial product - Advanced Web Conferencing Software Configuring https (mod_ssl): Mod_SSL.org: Home Page Mod_SSL.org: Mod_SSL HowTo Mod_SSL.org: Steps to create SSL server certificate http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page of 23 https configuration Measuring Web Server Performance: Web performance benchmarking tool httperf Httperf sends requests to the web server at a specified rate and gathers stats Increase till one finds the saturation point Installation: Debian: apt-get install httperf Example useage: Print performance stats for home page of yourdomain.com: httperf hog server www.yourdomain.com Create 100 connections at a rate of 10/sec: httperf hog server http://www.yourdomain.com/ num-conn 100 rate 10 timeout Generate 10 sessions at a rate of i seesion/sec every seconds: httperf hog ser=www wsess=10,5,2 rate timeout httperf command line options: Command hog num-calls max-connections=# num-calls=# server host-name Command Description Use as many TCP ports as necessary to generate stats (else limited to port 1024-5000) Session oriented workloads Limit the number of connections to that specified Specify the number of calls to issue on each connection before closing it Default localhost Specify IP address of host name wsess=N1,N2,X Specify session where N1: number of sessions N2: number of calls per session X: delay between calls (sec) Stop if there is no response within timeout period timeout Links: httperf home page - downloads, documentation Man page Other web performance measurement tools: autobench: Perl wrapper to httperf which itterates and gathers data for each run Creates csv file for use in a spreadsheet to generate graphs openload: Simulates number of concurrent users Measures completed requests/sec Apache JMeter: Java app for static and dynamic performance analysis FTPd and FTP user account configuration: Many FTP programs exist This example covers the popular vsftpd (Red Hat default 9.0, Fedora Core, Suse) and wu-ftpd (Washington University) program which comes standard with RedHat (last shipped with RedHat 8.0 but can be installed on any Linux system) (RPM: wu-ftpd) There are other FTP programs including proFtpd (supports LDAP authentication, Apache like directives, full featured ftp server software), bftpd, pure-ftpd (free BSD and optional on Suse), etc FTPd configuration tutorials: # vsFTPd: Configuration # WU-FTPd: Configuration # FTP Clients: Links vsFTPd and FTP user account configuration: The vsFTPd ftp server was first made available in Red Hat 9.0 It has been adopted by Suse and OpenBSD as well This is currently the recomended FTP daemon for use on FTP servers Enable vsftpd: Red Hat/Fedora Core/CentOS: VsFTPd is a stand alone service and by the default Fedora Core installation, not controlled by xinetd as is the wu-ftpd default installation Thus start service: service vsftpd start (or: /etc/init.d/vsftpd start) Configure vsftpd to start upon system boot: chkconfig add vsftpd SuSE: By default, the vsftpd is an xinetd controlled service To enable FTP server services edit the file /etc/xinetd.d/vsftpd and change: disable = yes to: disable = no Restart the xinetd daemon: /etc/init.d/xinetd restart Note: vsftpd can also be run as a stand-alone service to achieve a faster response time Ubuntu (dapper 6.06) / Debian: Install: apt-get install vsftpd http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page of 23 VsFTPd is a stand alone service Start: /etc/init.d/vsftpd start Stop: /etc/init.d/vsftpd stop For more on starting/stopping/configuring Linux services, see the YoLinux tutorial on the Linux init process and service activation Configuration files: vsFTPd configuration file: Fedora Core / Red Hat: /etc/vsftpd/vsftpd.conf S.u.S.e / Ubuntu (dapper 6.06) / Debian: /etc/vsftpd.conf Default for Fedora Core 3: anonymous_enable=YES - Anonymous FTP allowed by default if you comment this out Default directory used: /var/ftp local_enable=YES - Uncomment this to allow local users to log in with FTP write_enable=YES - Uncomment this to enable any form of FTP write or upload command local_umask=022 - Default is 077 Umask 022 is used by most other ftpd's #anon_upload_enable=YES - Uncomment to allow the anonymous FTP user to upload files Requires the above global write enabled Directory must also be writable by user - Uncomment this to allow the anonymous FTP user to be able to create new directories #anon_mkdir_write_enable=YES xferlog_enable=YES - Activate directory messages Messages given to remote users when they enter certain directories - Activate logging of uploads/downloads connect_from_port_20=YES - PORT transfer connections originate from port 20 (ftp-data) #chown_uploads=YES #chown_username=whoever - Uploaded anonymous files set to a specified owner (not root) dirmessage_enable=YES #xferlog_file=/var/log/vsftpd.log - Specify logfile explicitly Default is /var/log/vsftpd.log xferlog_std_format=YES - Output to log file in standard ftpd xferlog format #idle_session_timeout=600 - Set timing out for an idle session #data_connection_timeout=120 - Set timing out for an idle data connection Port 20 #nopriv_user=ftpsecure - Run ftp server as an isolated and unprivileged user # Enable this and the server will recognise asynchronous ABOR requests Not # recommended for security (the code is non-trivial) Not enabling it, may confuse older FTP clients #async_abor_enable=YES #ascii_upload_enable=YES #ascii_download_enable=YES - Improve performance by disabling ASCII mode Disables command "ascii" and "SIZE /big/file" #ftpd_banner=Welcome to YoLinux - Customize the login banner string #deny_email_enable=YES - Disallow specified anonymous e-mail addresses Used to combat certain DoS attacks #banned_email_file=/etc/vsftpd.banned_emails (default) #chroot_list_enable=YES - List users chroot()'d to their home directory If "NO", list users not chroot()'d #chroot_list_file=/etc/vsftpd.chroot_list (default) ls_recurse_enable=YES - Allow "ls -R" recursive directory list Default is disabled pam_service_name=vsftpd userlist_enable=YES #deny_email_enable=YES listen=YES tcp_wrappers=YES - (Default) Deny users specified in file /etc/vsftpd.user_list If "userlist_enable=NO" then allow specified users - Disallow specified anonymous e-mail addresses Used to combat certain DoS attacks - Enable for standalone mode as opposed to an xinetd service Restart the FTP service if the config file is changed: service vsftpd restart (or: /etc/init.d/vsftpd restart) [Potential Pitfall]: vsftp does NOT support comments on the same line as a directive i.e.: directive=XXX # comment vsftp.conf man page Specify list of local users chrooted to their home directories: /etc/vsftpd/vsftpd.chroot_list (Requires: chroot_list_enable=YES) user1 user2 user-n If userlist_enable=NO, then specify users not to be chroot'd Specify list of users: /etc/vsftpd.user_list (Deny list of users requires: userlist_enable=YES) Also see PAM configuration below root http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page 10 of 23 bin daemon adm lp sync shutdown halt If userlist_enable=NO, then specify valid users PAM configuration file Fedora Core 3: /etc/pam.d/vsftpd #%PAM-1.0 auth auth auth account session required required required required required pam_listfile.so item=user sense=deny file=/etc/vsftpd.ftpusers onerr=succeed pam_stack.so service=system-auth pam_shells.so pam_stack.so service=system-auth pam_stack.so service=system-auth This causes PAM to check /etc/vsftpd.ftpusers for users who are denied This duplicates /etc/vsftpd.user_list Speciy user in both files File: /etc/vsftpd.ftpusers root bin daemon adm lp sync shutdown halt Logrotate configuration file: /etc/logrotate.d/vsftpd.log /var/log/xferlog { # ftpd doesn't handle SIGHUP properly nocompress missingok } Sample vsFTPd configurations: Anonymous download FTP server configuration: /etc/vsftpd/vsftpd.conf # Access rights anonymous_enable=YES chown_uploads=YES chown_username=ftp local_enable=NO write_enable=NO anon_upload_enable=NO anon_mkdir_write_enable=NO anon_other_write_enable=NO # Security anon_world_readable_only=YES connect_from_port_20=YES force_dot_files=NO guest_enable=NO hide_ids=YES pasv_min_port=50000 pasv_max_port=60000 # Features xferlog_enable=YES ls_recurse_enable=NO ascii_download_enable=NO async_abor_enable=YES # Performance one_process_model=NO idle_session_timeout=120 data_connection_timeout=300 accept_timeout=60 connect_timeout=60 max_per_ip=4 anon_max_rate=50000 - Turn on anonymous FTP - Uploaded files owned by an assigned user - Uploaded files owned by this assigned user - No upload of files system changes allowed pam_service_name=vsftpd userlist_enable=YES #enable for standalone mode listen=YES tcp_wrappers=YES Anonymous logins use the login name "anonymous" and then the user supplies their email address as a password Any password will be accepted Used to allow the public to download files from an ftp server Generally, no upload is permitted Web hosting configuration: /etc/vsftpd/vsftpd.conf # Access rights anonymous_enable=NO local_enable=YES write_enable=YES local_umask=022 # Security connect_from_port_20=YES force_dot_files=NO - Allow users to ftp to their home directories - Allow users to STOR, DELE, RNFR, RNTO, MKD, RMD, APPE and SITE http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial - guest_enable=NO ftpd_banner=Welcome to Super Duper Hosting chroot_local_user=YES chroot_list_enable=YES chroot_list_file=/etc/vsftpd.chroot_list hide_ids=YES pasv_min_port=50000 pasv_max_port=60000 # Features xferlog_enable=YES ls_recurse_enable=NO ascii_download_enable=NO async_abor_enable=YES dirmessage_enable=YES # Performance one_process_model=NO idle_session_timeout=120 data_connection_timeout=300 accept_timeout=60 connect_timeout=60 max_per_ip=4 # pam_service_name=vsftpd userlist_enable=YES #enable for standalone mode listen=YES tcp_wrappers=YES Page 11 of 23 Don't remap user name Customize the login banner string Limit user to browse their own directory only Enable list of system / power users Actual list of system / power users - Message greeting held in file message or specify with message_file= Specify list of local users chrooted to their home directories: /etc/vsftpd/vsftpd.chroot_list Ubuntu typically: /etc/vsftpd.chroot_list (Requires: chroot_list_enable=YES) user1 user2 user-n If userlist_enable=NO, then specify users not to be chroot'd [Potential Pitfall]: Mispelling a directive will cause vsftpd to fail with little warning File: message A NOTE TO USERS UPLOADING FILES: File names may consist of letters (a-z, A-Z), numbers (0-9), an under score ("_"), dash ("-") or period (".") only The file name may not begin with a period or dash Test if vsftp is listening: netstat -a | grep ftp [root]# netstat -a | grep ftp tcp 0 *:ftp *:* LISTEN Links: vsFTPd Home Page Sample configurations vsftp.conf Man page WU-FTPd and FTP user account configuration: The wu-ftpd FTP server can be downloaded (binary or source) from it's home page at http://wu-ftpd.org There are three kinds of FTP logins that wu-ftpd provides: anonymous FTP - one logs in with the username 'anonymous' real FTP - log in with a real username and password and has access to the entire disk structure guest FTP - one logs in with a real user name and password, but the user is chroot'ed to his home directory and cannot escape from it They are constrained to their home directory which also means that they don't have access to /bin/ls and other commands on the server Thus a local minimalist environment must be set up This tutorial covers "guest" FTP configuration The file /etc/ftpaccess controls the configuration of ftp # Don't allow system accounts to log in over ftp deny-uid %-99 %65534deny-gid %-99 %65534class all real,guest * email webmaster@your-domain.com loginfails http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial readme readme message message README* login README* cwd=* /welcome.msg message compress tar chmod delete overwrite rename delete overwrite rename umask yes yes no no no no yes yes yes no Page 12 of 23 login cwd=* all all guest,anonymous anonymous # delete files permission? anonymous # overwrite files permission? anonymous # rename files permission? guest # delete files permission? guest # overwrite files permission? guest # rename files permission? guest # umask permission? log transfers anonymous,real inbound,outbound shutdown /etc/shutmsg passwd-check rfc822 warn # Must also create message file /etc/pathmsg of the guest directory # In this case it refers to /home/user1/public_html/etc/pathmsg path-filter guest /etc/pathmsg ^[-A-Za-z0-9_\.]*$ ^\ ^limit all noretrieve passwd htaccess core - Do not allow users to download files of these names limit-time * 20 byte-limit in 5000 - Limit file size - Set system user default to be categorized as a "guest" A "real" user can roam the system Guestuser is chrooted guestuser * realgroup regularuserx regularusery - Assign real user privileges to members of groups "regularuserx" and "regularusery" Visibility of the whole file system and subject to regular UNIX file permissions realuser user4 - Assign real user privileges to user id "user4" restricted-uid user1 user2 user3 - Restricts FTP to the specified directories guest-root /home/user1/public_html user1 guest-root /home/user2/public_html user2 guest-root /home/user3/public_html user3 Note: and user3 refer to login accounts Use the appropriate login name The above configuration disables anonymous FTP which allows anyone to perform an FTP login with the id anonymous and an email address as a password To enable anonymous FTP, change the class directive to: user1, user2 class all real,guest,anonymous * GUI FTP configuration tools: /usr/bin/kwuftpd /sbin/linuxconf (Note: Linuxconf is no longer included with Red Hat 7.3 and later) Red Hat Linux assigns users a user id and group id which is the same This means that it does not matter if you use a realuser or realgroup directive as they will act the same Red Hat Linux 7.1 and later uses the xinet daemon to manage ftp connections Thus xinetd must be running and configured to support ftp The configuration file is /etc/xinetd.d/wu-ftpd The command chkconfig wu-ftpd on will make the ftp server available See xinet configuration for more info Allow overide of deny-uid and/or deny-gid: allow-uid user-to-allow allow-gid group-to-allow Optional configuration: Create a group ftpchroot Add users to this group Use directive: guestgroup ftpchroot [Potential Pitfall]: Flakey ftp behavior, timeouts, etc?? FTP works best with name resolution of the computer it is communicating with This requires proper /etc/resolve.conf and name server (bind) configuration, /etc/hosts or NIS/NFS configuration File /home/user1/public_html/etc/pathmsg: A NOTE TO USERS UPLOADING FILES: File names may consist of letters (a-z, A-Z), numbers (0-9), an under score ("_"), dash ("-") or period (".") only The file name may not begin with a period or dash You have tried to upload a file with an inappropriate name The whole point of the chroot directory is to make the user's home directory appear to be the root of the filesystem (/) so one could not wander around the filesystem Configuration of /etc/ftpaccess will limit the user to their respective directories while still offering access to /bin/ls and other system commands used in FTP operation As root: http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial cd /home/user1 mkdir public_html chown $1.$1 public_html touch rhosts chmod ugo-xrw rhosts Page 13 of 23 - Security protection Man Pages: Server: ftpd - Internet File Transfer Protocol server File Formats: /etc/ftpaccess - Configuration file for ftpd /etc/ftpservers - ftpd virtual hosting configuration file (optional) /etc/ftphosts - allow or deny access to certain accounts from various hosts (optional) /etc/ftpconversions - ftpd conversions database (for tar and compression) /var/log/xferlog - FTP server logfile ftp - File Transfer Client program Configuration files: (RH 8.0+) PAM configuration file: /etc/pam.d/ftp #%PAM-1.0 auth auth auth account session required required required required required pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed pam_stack.so service=system-auth pam_shells.so pam_stack.so service=system-auth pam_stack.so service=system-auth Xinetd configuration file: /etc/xinetd.d/wu-ftpd service ftp { disable = no socket_type wait user server server_args log_on_success log_on_failure nice } = stream = no = root = /usr/sbin/in.ftpd = -l -a += DURATION USERID += USERID = 10 Note: wu-FTPd is controlled by xinetd and not a stand alone service like vsFTPd Logrotate configuration file: /etc/logrotate.d/ftpd /var/log/xferlog { nocompress } More information: WU-FTPD Development Group Home Page More resources Academ Consulting FTP FAQ - Koos van den Hout's dkftpbench - FTP benchmark program to give you an idea as to how many simultaneous dialup clients a server can support FTP and text file type conversions: End Of Line Characters - by Peter Benjamin Chrooted sftp (ssl) project Man pages on related FTP commands and files: chroot - Run with a special root directory ftpcount - Show number of concurrent users ftpshut - close down the ftp servers at a given time ftprestart - Restart previously shutdown ftp servers ftpwho - show current process information for each ftp user privatepw - Change WU-FTPD Group Access File Information (admin command) Other FTP daemons: FTP4All CrushFTP - Java/cross platform WS_FTP FTP Pitfalls: If you get the following error: ftp> ls 227 Entering Passive Mode (208,188,34,109,208,89) ftp: connect: No route to host http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page 14 of 23 This means you have firewall issues most probably on the FTP server itself Start by removing the firewall "iptables" rules: iptables -F Add rules until you discover what is causing the problem Passive mode: Passive mode can also help one past the rules: ftp> passive Passive mode on This toggles passive mode on and off When on, FTP will be limited to ports specified in the vsftpd configuration file: vsftpd.conf with the parameters pasv_min_port and pasv_max_port Firewall connection tracking module: # cat /etc/sysconfig/iptables-config | grep ip_nat_ftp IPTABLES_MODULES="ip_conntrack_ftp" NAT firewall modules: You can also try adding ip_nat_ftp to the list of autoloaded modules: (This will also load the dependancy: ip_conntrack_ftp.) # cat /etc/sysconfig/iptables-config | grep ip_nat_ftp IPTABLES_MODULES="ip_nat_ftp" Then restart the firewall: /etc/init.d/iptables condrestart FTP will change ports during use The ip_conntrack_ftp module will consider each connection "RELATED" If iptables allows RELATED and ESTABLISHED connections then FTP will work i.e rule: /etc/sysconfig/iptables -A INPUT -m state state ESTABLISHED,RELATED -j ACCEPT FTP Linux clients: kbear: GUI KDE based client Connect to multiple servers, transfer files, directory browsing, file content browsing Comes with S.U.S.e Linux gftp: GUI GTK+ Multithreaded client File transfer directory browsing and compare Multiple protocols: FTP, FTPS (control connection only), HTTP, HTTPS, SSH and FSP protocols Proxy support Comes with Red Hat / Fedora Core ftp: (/usr/kerberos/bin/ftp) kerberos enabled console ftp client (RPM package FC3: krb5-workstation) Basic user security: When hosting web sites, there is no need to grant a shell account which only allows the server to have more potential security holes Current systems can specify the user to have only FTP access with no shell by granting them the "shell" /sbin/nologin provided with the system or the "ftponly" shell described below The shell can be specified in the file /etc/passwd of when creting a user with the command adduser -s /sbin/nologin user-id [Potential Pitfall]: Red Hat 7.3 server with wu-ftp server 2.6.2-5 does not support this configuration to prevent shell access It requires users to have a real user shell i.e /bin/bash It works great in older and current Red Hat versions If it works for you, use it, as it is more secure to deny the user shell access You can always deny telnet access You should NOT be using this problem ridden version of ftpd Use the latest wu-ftpd-2.6.2-11 which supports users with shell /etc/ftponly [Potential Pitfall]: Ubuntu Dapper - Setting the shell to the preconfigured shell /bin/false will NOT allow vsftp access One must create the shell "ftponly" as defined below to allow vsftp access with no shell Disable remote telnet login access allowing FTP access only: Change the shell for the user in /etc/passwd from /bin/bash to be /etc/ftponly user1:x:502:503::/home/user1:/etc/ftponly Create file: /etc/ftponly Protection set to -rwxr-xr-x root root with the command: chmod ugo+x /etc/ftponly Contents of file: #!/bin/sh # # ftponly shell # trap "/bin/echo Sorry; exit 0" 10 15 # Admin=root@your-domain.com #System=`/bin/hostname`@`/bin/domainname` # /bin/echo /bin/echo "********************************************************************" /bin/echo " You are NOT allowed interactive access." /bin/echo /bin/echo " User accounts are restricted to ftp and web access." /bin/echo /bin/echo " Direct questions concerning this policy to $Admin." http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page 15 of 23 /bin/echo "********************************************************************" /bin/echo # # C'ya # exit The last step is to add this to the list of valid shells on the system Add the line /etc/ftponly to /etc/shells Sample file contents: /etc/shells /bin/bash /bin/bash1 /bin/tcsh /bin/csh /etc/ftponly See man page on /etc/shells An alternative would be to assign the shell /bin/false or /sbin/nologin which became available in later releases of Red Hat Set file quotas to limit user account For more on Linux security see the: YoLinux.com Internet web site Linux server security tutorial Domain Name Server (DNS) configuration using Bind version or 9: Two of the most popular ways to configure the program Bind to perform DNS services is in the role of (1) ISP or (2) Web Host In an ISP configuration the DNS server must resolve IP addresses for any URL the user wishes to visit (See DNS caching server) In a purely web hosting configuration, Bind will only resolve for the IP addresses of the domains which are being hosted This is the configuration which will be discussed and is often called an "Authoritative-only Nameserver" When resolving IP addresses for a domain, Internic is expecting a "Primary" and a "Secondary" DNS name server (Sometimes called Master and Slave) Each DNS name server requires the file /etc/named.conf and the files it points to This is typically two separate computer systems hosted on two different IP addresses It is not necesary that the Linux servers be dedicated to DNS as they may run a web server, mail server, etc Note on Bind versions: Red Hat versions 6.x used Bind version Release 7.1 of Red Hat began using Bind version and the GUI configuration tool bindconf introduced for those of you that like a pretty point and click interface for configuration Packages: Red Hat / Fedora Core / CentOS: bind Ubuntu (dapper 6.06) / Debian: bind9 Primary server (master): File: named.conf Red Hat / Fedora Core / CentOS: /etc/named.conf Ubuntu / Debian: /etc/bind/named.conf Place local definitions in /etc/bind/named.conf.local options { version "Bind"; - Don't disclose real version to hackers directory "/var/named"; allow-transfer { XXX.XXX.XXX.XXX; }; - IP address of secondary DNS recursion no; fetch-glue no; - Bind only! Not used by version }; zone "your-domain.com"{ type master; file "named.your-domain.com"; notify yes; }; zone "0.0.127.in-addr.arpa"{ type master; file "named.local"; allow-update { none; }; }; Note the omission of zone "." File: /var/named/named.your-domain.com Red Hat / CentOS 3: /var/named/named.your-domain.com Red Hat EL4 / Fedora Core / CentOS 4: [Chrooted] /var/named/chroot/var/named/data/named.your-domain.com Red Hat EL4 / Fedora Core / CentOS 4: /var/named/data/named.your-domain.com Ubuntu / Debian: /etc/bind/data/named.your-domain.com $TTL 604800 - Bind (and some of the later versions of Bind 8) requires $TTL statement Measured in seconds This value is days your-domain.com IN SOA ns1.your-domain.com hostmaster.your-domain.com ( 2000021600 ; serial - Many people use year+month+day+integer as a system Never greater than 2147483647 for a 32 bit processor 86400 ; refresh - How often secondary servers (in seconds) should check in for changes in serial number (86400 sec = 24 hrs) http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page 16 of 23 7200 ; retry - How long secondary server should wait for a retry if contact failed 1209600 ; expire - Secondary server to purge info after this length of time 604800 ) ; default_ttl - How long data is held in cache by remote servers IN A XXX.XXX.XXX.XXX - Note that this is the default IP address of the domain I put the web server IP address here so that domain.com points to the same servers as www.domain.com ; ; Name servers for the domain ; IN NS ns1.your-domain.com IN NS ns2.your-domain.com ; ; Mail server for domain ; IN MX mail ; ; Nodes in domain ; node1 IN A XXX.XXX.XXX.XXX ns1 IN A XXX.XXX.XXX.XXX ns2 IN A XXX.XXX.XXX.XXX mail IN A XXX.XXX.XXX.XXX IN MX XXX.XXX.XXX.XXX ; ; Aliases to existing nodes in domain ; www IN CNAME node1 ftp IN CNAME node1 - Identify "mail" as the node handling mail for the domain Do NOT specify an IP address! Note that this is the IP address of node1 Optional: For hosting your own primary name server Note that this is the IP address of ns1 Optional: For hosting your own secondary name server Note that this is the IP address of ns2 Identify the IP address for node mail Identify the IP address for mail server named "mail" Define the webserver "www" to be node1 Define the ftp server to be node1 MX records for 3rd party off-site mail servers: your-domain.com your-domain.com IN MX IN MX 10 mail1.offsitemail.com 20 mail2.offsitemail.com Append to the above file Secondary server (slave): File: named.conf Red Hat / Fedora Core / CentOS: /etc/named.conf Ubuntu / Debian: /etc/bind/named.conf options { version "Bind"; directory "/var/named"; allow-transfer { none; }; recursion no; fetch-glue no; }; zone "your-domain.com"{ type slave; file "named.your-domain.com"; masters { XXX.XXX.XXX.XXX; }; }; zone "0.0.127.in-addr.arpa"{ type master; file "named.local"; }; - Don't disclose real version to hackers - Bind only! Not used by version - Specify slaves/named.your-domain.com for RHEL4 chrooted bind - IP address of primary DNS Note: RHEL4, CentOS 4, Fedora Core 3+ use chrooted directory structure permissions which require the use of the slaves subdirectory /var/named/slaves Man page on named.conf - Best source of information!!! [Potential Pitfall]: Ubuntu dapper - Create log file and set ownership and permission for file not created by installation: touch /var/log/bindlog chown root.bind /var/log/bindlog chmod 664 /var/log/bindlog [Potential Pitfall]: Error in /var/log/messages: transfer of 'yolinux.com/IN' from XXX.XXX.XXX.XXX#53: failed while receiving responses: permission denied Named needs write permission on the directory containing the file This condition often occurs for a new "slave" or "secondary" name server where the zone files not yet exist The default (RHEL4, CentOS 4, Fedora Core 3, ): drwxr-x - root named 4096 Aug 25 2004 named drwxrwx - named named 4096 Sep 17 20:37 slaves Fix: In named.conf specify that the slaves to go to slaves directory /var/named/chroot/var/named/slaves with the directive: file "slaves/named.your-domain.com"; Bind Defaults: Uses port 53 if none is specified with the listen-on port statement http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page 17 of 23 Bind will use random ports above port 1024 for queries For use with firewalls expecting all DNS traffic on port 53, specify the following option statement in /etc/named.conf query-source address * port 53; Logging is to /var/log/messages After the configuration files have been edited, restart the name daemon /etc/rc.d/init.d/named restart (Note: Debian uses the directory: /etc/init.d/) Bind zone transfers work best if the clocks of the two systems are synchronised See the YoLinux SysAdmin Tutorial: Time and ntpd File: /var/named/named.your-domain.com This is created for you by Bind on the slave (secondary) server when it replicates from Primary server DNS GUI configuration: Fedora Core 2/3: /usr/bin/system-config-bind Red Hat 8/9, Fedora Core 1: /usr/bin/redhat-config-bind Test DNS: Must install packages: Red Hat / Fedora Core / SuSE: bind-utils Ubuntu (dapper 6.06) / Debian: bind9-host Test the name server with the host command in interactive mode: host node.domain-to-test.com your-nameserver-to-test.domain.com Note: The name server may also be specified by IP address or Test the name server with the nslookup command in interactive mode: nslookup > server your-nameserver-to-test.domain.com > node.domain-to-test.com > exit Test the MX record if appropriate: nslookup -querytype=mx domain-to-test.com OR http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page 18 of 23 host -t mx domain-to-test.com Test using the dig command: dig @name-server domain-to-query OR dig @IP-address-of-name-server domain-to-query Test your DNS with the following DNS diagnostics web site: DnsStuff.com Extra logging to monitor Bind: Add the following to your /etc/named.conf file logging { channel bindlog { file "/var/log/bindlog" print-time yes; print-category yes; print-severity yes; }; category xfer-out { bindlog; }; category xfer-in { bindlog; }; category security { bindlog; }; versions size 1m; - Keep five old versions of the log-file (rotates logs) - Zone transfers - Zone transfers - Approved/unapproved requests The following logging statements, panic, insist and response-checks are valid for Bind only Do not user for version category panic { bindlog; }; - System shutdowns category insist { bindlog; }; - Internal consistency check failures category response-checks { bindlog; }; - Messages // }; Chroot Bind for extra security: Note: Most modern Linux distributions default to a "chrooted" installation This technique runs the Bind name service with a view of the filesystem which changes the definition of the root directory "/" to a directory in which Bind will operate i.e /var/named/chroot The following example uses the Red Hat RPM bind-8.2.3-0.6.x.i386.rpm Applies to Bind version as well The latest RedHat bind updates run the named as user "named" to avoid a lot of earlier hacker exploits To chroot the process is to create an even more secure environment by limiting the view of the system that the process can access The process is limited to the chrooted directory assigned The chroot of the named process to a directory under a given user will prevent the possibility of an exploit which at one time would result in root access The original default RedHat configuration (6.2) ran the named process as root, thus if an exploit was found, the named process will allow the hacker to use the privileges of the root user (no longer true) Named Command Sytax: named -u user -g group -t directory-to-chroot-to Example: named -u named -g named -t /opt/named When chrooted, the process does not have access to system libraries thus a local lib directory is required with the appropriate library files - theoretically This does not seem to be the case here and as noted above in chrooted FTP It's a mystery to me but it works???? Another method to handle libraries is to re compile the named binary with everything statically linked Add -static to the compile options The chrooted process should also require a local /etc/named.conf etc but doesn't seem to??? Script to create a chrooted bind environment: #!/bin/sh cd /opt mkdir named cd named mkdir etc mkdir bin mkdir var cd var mkdir named mkdir run cd chown -R named.named bin etc var You can probably stop here If your system acts like a chrooted system should, then continue with the following: cp -p /etc/named.conf etc cp -p /etc/localtime etc cp -p /bin/false bin echo "named:x:25:25:Named:/var/named:/bin/false" > etc/passwd echo "named:x:25:" > etc/group touch var/run/named.pid http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page 19 of 23 if [ -f /etc/namedb ] then cp -p /etc/namedb etc/namedb fi mkdir dev cd dev # Create a character unbuffered file mknod -m ugo+rw null c cd chown -R named.named bin etc var Add changes to the init script: /etc/rc.d/init.d/named #!/bin/bash # # named This shell script takes care of starting and stopping # named (BIND DNS server) # # chkconfig: - 55 45 # description: named (BIND) is a Domain Name Server (DNS) \ # that is used to resolve host names to IP addresses # probe: true # Source function library /etc/rc.d/init.d/functions # Source networking configuration /etc/sysconfig/network # Check that networking is up [ ${NETWORKING} = "no" ] && exit [ -f /etc/sysconfig/named ] && /etc/sysconfig/named - Added in Red Hat version 7.1 [ -f /usr/sbin/named ] || exit [ -f /etc/named.conf ] || exit RETVAL=0 start() { # Start daemons echo -n "Starting named: " - Change made here daemon named -u named -g named -t /opt/named RETVAL=$? [ $RETVAL -eq ] && touch /var/lock/subsys/named echo return $RETVAL } stop() { # Stop daemons echo -n "Shutting down named: " killproc named RETVAL=$? [ $RETVAL -eq ] && rm -f /var/lock/subsys/named echo return $RETVAL } rhstatus() { /usr/sbin/ndc return $? } restart() { stop start } reload() { /usr/sbin/ndc return $? } probe() { # named knows # to offer to /usr/sbin/ndc return $? } status reload how to reload intelligently; we don't want linuxconf restart every time reload >/dev/null 2>&1 || echo start # See how we were called case "$1" in start) start ;; stop) stop ;; status) rhstatus ;; restart) restart ;; condrestart) [ -f /var/lock/subsys/named ] && restart || : ;; reload) reload ;; probe) probe ;; *) echo "Usage: named {start|stop|status|restart|condrestart|reload|probe}" exit esac exit $? Note: The current version of bind from the RedHat errata updates and security fixes (http://www.redhat.com/support/errata/) runs the named process as user "named" in the home (not chrooted) directory /var/named with no shell available (named -u named) This should be secure enough Proceed with a chrooted installation if your are paranoid See: http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page 20 of 23 Securing DNS: How to use chroot bind features Chrooted DNS configuration: Modern releases of Linux (i.e Fedore Core 3, Red Hat Enterprise Linux 4) come preconfigured to use "chrooted" bind This security feature forces even an exploited version of bind to only operate within the "chrooted" jail /var/named/chroot which contains the familiar directories: /var/named/chroot/etc: /var/named/chroot/dev: /dev/null /dev/random /dev/zero Configuration files devices used by bind: (Real devices created with the mknod command.) Zone files and configuration information /var/named/chroot/var: These directories are generated and configured by the Red Hat/Fedora RPM package "bind-chroot" If building from source you will have to generate this configuration manually: mkdir mkdir mknod mknod mknod chmod mkdir ln -s mkdir ln -s ln -s -p /var/named/chroot /var/named/chroot/dev /var/named/chroot/dev/null c /var/named/chroot/dev/zero c /var/named/chroot/dev/random c 666 -R /var/named/chroot/dev -p /var/named/chroot/etc /var/named/chroot/etc/named.conf /etc/named.conf -p /var/named/chroot/var/named /var/named/chroot/var/named/named.XXXX /var/named/named.XXXX /var/named/chroot/var/named/named.YYYY /var/named/named.YYYY mkdir mkdir mkdir mkdir chown chown -p -p -p -p -R -R /var/named/chroot/var/named/slaves /var/named/chroot/var/named/data /var/named/chroot/var/run /var/named/chroot/var/tmp named:named /var/named/chroot root:named /var/named/chroot/var/named Load Balancing of servers using Bind: DNS Round-Robin This will populate name servers around the world with different IP addresses for your web server www.your-domain.com www0 www1 www2 www3 www4 www5 IN IN IN IN IN IN A A A A A A XXX.XXX.XXX.1 XXX.XXX.XXX.2 XXX.XXX.XXX.3 XXX.XXX.XXX.4 XXX.XXX.XXX.5 XXX.XXX.XXX.6 www IN IN IN IN IN IN IN CNAME CNAME CNAME CNAME CNAME CNAME CNAME www0.your-domain.com www1.your-domain.com www2.your-domain.com www3.your-domain.com www4.your-domain.com www5.your-domain.com www6.your-domain.com Also see lbnamed: lbnamed load balancing named Bind/DNS Links: Internet Software Consortium (ISC) Home Page - ISC Bind Home Bind FAQ, pitfalls and answers Zytrax Bind manual - Bind for rocket scientists comp.protocols.tcp-ip.domains FAQ - HTML version More on load balancing and round robin schemes LDP DNS-HOWTO ACME: DNS resources DNS Security presentation - Cricket Liu (coauthor of DNS and Bind) DNS Security Paper - Craig Rowland GraniteCanyon.com: Free DNS hosting - If you don't want to set it up, have someone it for you EveryDNS.net - Free DNS DNS2GO - Domain hosting for DHCP clients Secondary.com - Free secondary names server hosting (five or fewer domains) TZO.com - Dynamic, secondary DNS services UltraDNS.com - Outsourced DNS management and service DynDNS.org http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page 21 of 23 Command: ipcheck.py -i eth0 DynDNS-user-id password node.dnsalias.net Then add script update.dyndns.ip to directory /etc/cron.daily/ to update IP This host must also be allowed access through any firewall rules DynDNS/TODD - Dynamic DNS for those with dynamic IP addresses (i.e dial-up game servers etc.) Domain name registration: Domain Name Registrars: NetworkSolutions.com Register.com Registrar.GoDaddy.com - Domain name registration for only $8.95/year!!! Dotster.com - Domain name registration for only $14.95/year DomainsNext.com - $11.95/year EasyDNS.com - $25.00/year Aplus.net - Domain Registration $7.95/year - Not good Gandi.net - European AfterNic.com - Domain name exchange and auction BuyDomains.com - Buy a domain name that a squatter is holding Note that the Name registrations policies for the registrars are stated at ICANN.org You must renew with the same registrar within five days BEFORE the expiration date There is no rule for afterwards Most free a domain name 30 days after it expires Web Server Load Balancing: Load balancing becomes important if your traffic volume becomes too great for either your server or network connection or both Multiple options are available for load balancing DNS round-robin: Discussed above, this uses DNS to point users to random server in a list of appropriate servers This spreads the load among the servers in the list Use a Linux Virtual Server to Create a Load Balance Cluster See next section below Run a reverse proxy See nginx ("engine X") From a single external internet network connection, route http, smtp, imap or pop3 traffic to various servers on an internal network Results are pushed back to the nginx proxy for routing to the internet (no caching) Run the Apache httpd web server module "mod_proxy" to offload processing of dynamic content to another web server This acts as a reverse proxy, routing external traffic to various servers on an internal network Using a Linux Virtual Server to Create a Load Balance Cluster: You can use a single Linux server to forward requests to a cluster of servers using iptables for IP masquerading and IPVsadm to scale your load The load balancing server receiving and routing the requests is called the "Linux Virtual Server" (LVS) The LVS receives the requests which are passed to the real servers which process and reply to the request This reply is forwarded to the client by the LVS This feature is available with the Linux 2.4/2.6 kernel (If compiling kernel: Networking Options + IP: Virtual Server Configuration) Configuration: This example will load balance http traffic to three web servers and ftp traffic to a fourth server Enable Forwarding: (Also see YoLinux Networking Tutorial: Enable Forwarding) echo "1" > /proc/sys/net/ipv4/ip_forward Enable IP Masquerading: iptables -t nat -P POSTROUTING DROP iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE For more on IP Masquerading, iptables and subnet addresses, see the YoLinux network gateway tutorial Enable virtual server: Create virtual service and choose scheduler for http (80) and ftp (21): ipvsadm -A -t 66.218.88.103:80 -s wlc ipvsadm -A -t 66.218.88.103:21 -s wrr Command directives: A: Add a virtual service defined by IP address, port number, and protocol -t: Use TCP service host:port -s: scheduler: rr: Robin Robin: distributes jobs equally amongst the avail- able real servers wrr: Weighted Round Robin lc: Least-Connection: assigns more jobs to real servers with fewer active jobs wlc: (Default) Weighted Least-Connection: assigns more jobs to servers with fewer jobs and relative to the real server's weight lblc, lblcr, dh, sh, sed, nq See man page Configure load balancing cluser ipvsadm ipvsadm ipvsadm ipvsadm -a -a -a -a -t -t -t -t 66.218.88.103:80 66.218.88.103:80 66.218.88.103:80 66.218.88.103:21 -r -r -r -r 176.168.1.1:80 176.168.1.2:80 176.168.1.3:80 176.168.1.4:21 -m -m -w -m -m http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page 22 of 23 Command directives: -r: Real server -m: Use masquerading also known as network address translation (NAT) -w: Weight is an integer specifying the capacity of a server rela- tive to the others in the pool The valid values of weight are through to 65535 The default is Links: LinuxVirtualServer.org iptables - Administration tool for IPv4 packet filtering and NAT ipvsadm - Administer the routing table on a Linux Virtual Server Managing Web Server Daemons: To view if these services are running, type ps -aux and look for the httpd, inetd and named services (daemons) These are background processes necessary to perform the server tasks root nobody nobody root 681 28123 28186 385 0.0 0.0 0.0 0.0 0.5 1.1 0.7 0.1 2304 744 ? 3036 1420 ? 3044 896 ? 1136 232 ? S S S S Sep09 Oct06 Oct06 Sep09 0:01 0:00 0:00 0:00 named httpd httpd inetd A new installation will most likely NOT start the named background process which may be started manually after configuration See the YoLinux Init Process Tutorial for more information The inetd (or xinetd) background process is the Internet daemon which starts FTP when an ftp request is made Sys Admin Script: Script to prepare an account: #!/bin/sh # Author Greg Ippolito # Puspose: Set up chroot'ed user directories for web and ftponly access # Requires: /opt/etc/AccountDefaults/pathmsg favicon.ico mwh-mini_tr.gif etc # /etc/ftponly # /etc/ftpaccess # guestuser * # Restricts users # restricted-uid # Extra restrictions # # You must be root to run this script # if [ $# -eq ] then echo "Enter user id as a command argument" else if [ -r /home/$1 ] then echo "User's home directory already exists" else echo "1) Create user." adduser $1 echo "2) Set user Password." passwd $1 echo "3) Add read access to user directory so apache can read it." cd /home chmod ugo+rx $1 cd $1 echo "4) Create web and ftp directories." mkdir public_html chown $1.$1 public_html cd public_html mkdir lib bin etc images chown $1.$1 images # This method was necessary but does not seem to be necessary any more # cp -p /home/ftp/etc/ld.so.cache /etc # cp -p /home/ftp/bin/compress /bin # cp -p /home/ftp/bin/cpio /bin # cp -p /home/ftp/bin/gzip /bin # cp -p /home/ftp/bin/ls /bin # cp -p /home/ftp/bin/tar /bin cd bin # ln -s gzip zcat cd /lib # cp -p /home/ftp/lib/ld-2* # cp -p /home/ftp/lib/libc-* # cp -p /home/ftp/lib/libnsl-* # cp -p /home/ftp/lib/libnss_files-* # ln -s ld-* ld-linux.so.2 # ln -s libc-* libc.so.6 # ln -s libnsl-* libnsl.so.1 # ln -s libnss_files-* libnss_files.so.2 cd / cp -p /opt/etc/AccountDefaults/pathmsg /etc/pathmsg touch rhosts chmod ugo-xrw rhosts echo "5) Create default web page" sed "/HEADING/s!HEADING!$1!" /opt/etc/AccountDefaults/default-index.html > index.html cp -p /opt/etc/AccountDefaults/favicon.ico cp -p /opt/etc/AccountDefaults/mwh-mini_tr.gif /images cp -p /opt/etc/AccountDefaults/robots.txt http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial # # Page 23 of 23 chown $1.$1 index.html favicon.ico robots.txt echo "6) Edit /etc/passwd file - change user shell to /etc/ftponly" cp -p /etc/passwd /etc/passwd-`date +%m%d%y` sed "/^$1/s!/bin/bash!/etc/ftponly!" /etc/passwd-`date +%m%d%y` > /etc/passwd echo "7) Add user to /etc/ftpaccess file" cp -p /etc/ftpaccess /etc/ftpaccess-`date +%m%d%y` sed "/^guestuser/s!guestuser !guestuser $1 !" /etc/ftpaccess-`date +%m%d%y` > /etc/ftpaccess sed "/^restricted-uid/s!restricted-uid !restricted-uid $1 !" /etc/ftpaccess-`date +%m%d%y` > /etc/ftpaccess echo "guest-root /home/$1/public_html $1" >> /etc/ftpaccess echo "8) Setting Disk Quotas to default 50Mb limit:" Use user johndoe as a prototype edquota -p johndoe $1 echo "9) Admin Follow-up:" echo " Modify quota.user if different than default" echo " Make changes to Bind names services on dns1 and dns2 if necessary" echo " Change /etc/http/conf/httpd.conf if using a new domain name" echo " Add e-mail aliases to node2 if necessary" fi fi FYI: Sample robots.txt files: yolinux.com/robots.txt yo-linux.com/robots.txt USC.edu/robots.txt http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 ... then be it' s http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page of 23 own virtual server and individual domain The... 03/14/08 Linux Web Server and Domain Configuration Tutorial Page of 23 A virtual host configuration allows one to host multiple web site domains on one server (This is not required for a dedicated linux. .. info see YoLinux list of PHP information web sites http://www.yolinux.com/TUTORIALS/LinuxTutorialWebSiteConfig.html 03/14/08 Linux Web Server and Domain Configuration Tutorial Page of 23 Running