DOKA_MFE Product Intro

A SUSTAINABLE PARTNERSHIP IN ASIA MFE Aluminium Formwork EcoForm MivanForm PremiumForm Quick Deck MFE Aluminium Formwork Products EcoForm Lightweight aluminium formwork panel designed for cost sensitive, high volume markets that require an affordable solution that still delivers high performance and quality results Item Specification Material specification Aluminium alloy to JS 4100 - 6061 T6 Welding method (contact face & panel reinforcement) Friction Stir Welding (FSW) Reinforcement Type “Top Hat” Section Panel Maximum Concrete Pressure 50kPA Concrete Surface Deviation +/- 3.2 mm Fixing Types Pin & Wedge Standard Wall Panel Dimension & Weight 0.6m x 2.05m – 21.96 kg Formwork Dimensional Tolerance +/- 0.50 mm Estimated number of formwork uses 300 MFE Formwork Technology MFE Aluminium Formwork Products MivanForm Robust and heavy duty aluminium formwork that has been used extensively in the market since 1991 The panel is designed for strength, high reusability and easier maintenance while delivering high performance and quality results Item Specification Material specification Aluminium alloy to JS 4100 - 6061 T6 Welding method (contact face & panel reinforcement) Friction Stir Welding (FSW) Reinforcement Type Mivan Flat Section Panel Maximum Concrete Pressure 50kPA Concrete Surface Deviation +/- 2.2 mm Fixing Types Pin & Wedge Standard Wall Panel Dimension & Weight 0.6m x 2.05m – 21.00 kg Formwork Dimensional Tolerance +/- 0.50 mm Estimated number of formwork uses 500 MFE Formwork Technology MFE Aluminium Formwork Products PremiumForm Premium heavy duty aluminium formwork that has designed for higher concrete pressures up to 75kPA, fixing options of Pin & Wedge or MFE Fast Locks and delivers high performance and quality results Item Specification Material specification Aluminium alloy to JS 4100 - 6061 T6 Welding method (contact face & panel reinforcement) Friction Stir Welding (FSW) Reinforcement Type “Top Hat” Section Panel Maximum Concrete Pressure 75kPA Concrete Surface Deviation +/- 2.2 mm Fixing Types Pin & Wedge or optional Fast Lock Pins Standard Wall Panel Dimension & Weight 0.6m x 2.35m – 26.7 kg Formwork Dimensional Tolerance +/- 0.50 mm Estimated number of formwork uses 750 MFE Formwork Technology MFE Aluminium Formwork Products Quick Deck Designed to construct large slab areas quickly and safety with minimum labour resources and fully compatible with all MFE aluminium formwork systems for an integrated monolithic solution for commercial buildings Item Specification Material specification Aluminium alloy to JS 4100 - 6061 T6 Welding method (contact face & panel reinforcement) MIG welded Reinforcement Type Quick Deck Flat Section Panel Max Slab Thickness Std Panel 450 mm Heavy Duty Panel 650 mm Concrete Surface Deviation +/- 6.5 mm Max Floor to Slab Height 5.0m Standard Panel Dimension & Weight 1.2m x 1.8m – 34.33 kg Fixing Type Crown Prop Head – No Pins & Wedges Required Estimated number of formwork uses 500 MFE Formwork Technology MFE Aluminium Formwork Products Quick Deck aluminium formwork panels being installed MFE Aluminium Formwork Products Quick Deck aluminium formwork panels in place viewed from below MFE Aluminium Formwork Products Quick Deck aluminium formwork panels in place viewed from below MFE Aluminium Formwork Products Quick Deck finish quality Compatible with MFE Formwork Systems Quick Deck integrated with MFE MivanForm to cast slab a structure monolithically MFE Formwork Technology 10 Compatible with MFE Formwork Systems Quick Deck casting a slab after a wall or column has been cast MFE Formwork Technology 11 Compatible with MFE Formwork Systems Quick Deck Integrating conventional methods with Quick Deck Casting slab with beams using traditional timber formwork MFE Formwork Technology 12 MFE Aluminium Formwork Products Quick Deck Quick Deck also used to form car park ramps MFE Formwork Technology 13 Columns Using MFE Aluminium Formwork for forming columns With quick release ties to reduce the need for excessive walers & bracing MFE Aluminium Formwork System Using MFE Aluminium formwork for forming columns on your projects has several advantages  Lightweight panels easily handled without cranes or lifting equipment  Fast and rapid to erect and dismantle by non-skilled labour after simple training  Column kits can be provided including provision for column shrinkages  Quick release tie system eliminates the need for heavy walers  Strong and fully reusable 300 to 500 times  Able to form columns as a “stand-alone” cast, or as part of a full monolithic pouring solution  Fully compatible with all MFE Formwork systems  Very cost effective vs conventional methods  Fully recyclable with high aluminium scrap values MFE Aluminium Formwork System Example configuration of a 1.2m x 1.2m x 3.0m floor to soffit height column  x 0.050m bottom rocker per side  x 0.600m x 2,050m panels per side  x 0.600m x 0.900m top panels per side  x 2,050 external corners (EC) per column  x 0.900m external corners (EC) per column  levels of quickrelease ties through center MFE Aluminium Formwork System Example configuration of a 1.2m x 1.2m x 3.0m floor to soffit height with shrinkages  Configuration changes to panels per side for 1.2m & 1.0m and panels per side under 1.0 m width  x 0.400 widths = 1.2m  x 0.400 + x 0.200 = 1.0m first shrinkage  x 0.400 = 0.800 second shrinkage MFE Aluminium Formwork System Quick release ties eliminate the need for column bracing and walers  Up to 1.8m MFE quick release wall ties can handle the pressure  MFE Aluminium Formwork panels able to withstand 50 – 75 kPA concrete pressure  Quick release wall ties able to hold the column WITHOUT additional walers  Stand alone columns only need one top waler and push pull props for alignment  Monolithic pour columns require no additional bracing MFE Aluminium Formwork System Quick release ties  Quick release ties effective up to 1.8m column thicknesses  Ties removed easily even after a few days from casting  Ties are fully reusable  No additional walers  Provides simple and rapid assembly and dismantling process Click to view the video → Easily removing 1.2m ties from a column 36 hours after casting MFE Safety Systems Working Platform Brackets Self Climbing Platform Lift Core Platform Edge Protection MFE Safety Systems Working Platform Brackets Our basic working platform bracket system is a simple solution that is easily fitted and fast to operate up the building as work progresses  Low-cost working level platform  Secure through-wall fixing method  Wood or steel planking options  Safety mesh with foot plate and hand rails available MFE Formwork Technology 21 MFE Safety Systems Self Climbing Platform MFE self climbing safety platforms provide an ultra safe and effective working environment that can be rapidly deployed and easily operated  Flexible configuration options with multiple levels available  Highly effective safety screens with fall and drop protection  Easy to erect and fix to the building  Simple and fast hydraulic jacking operation 22 MFE Safety Systems Lift Core Platform, Provides a safe working environment for lift core construction  Platform rests on main support brackets and hoisted from floor to floor by tower crane  Platform beams made of RHS and secondary beams made of C-Purlins supporting 3mm chequered plate flooring MFE Formwork Technology 23 MFE Safety Systems Edge Protection MFE provides a range of edge protection solutions for all formwork systems in the MFE range MFE Formwork Technology 24 1991 to 2018 27 years of construction expertise and innovation globally Contact in Vietnam: Trinh Thai Trung- Country Manager Email: trinh.trung@doka.com Cell: +84 98 384 0384 ... Formwork Products Quick Deck aluminium formwork panels being installed MFE Aluminium Formwork Products Quick Deck aluminium formwork panels in place viewed from below MFE Aluminium Formwork Products... +/- 0.50 mm Estimated number of formwork uses 300 MFE Formwork Technology MFE Aluminium Formwork Products MivanForm Robust and heavy duty aluminium formwork that has been used extensively in the... +/- 0.50 mm Estimated number of formwork uses 500 MFE Formwork Technology MFE Aluminium Formwork Products PremiumForm Premium heavy duty aluminium formwork that has designed for higher concrete