plc-Modicon_Premium

Modicon Premium automation  platform ® Catalog 2010 ™ 8001 Knightdale Blvd Knightdale, NC 27545 Tel: 919-266-3671 19 Waterman Avenue Toronto, Ontario M4B 1Y2 Tel: 416-752-8020 http://www.schneider-electric.us/ The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof Neither Schneider Electric nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein Please note: not all parts listed in this catalog are available in all countries Design: Schneider Electric Photos: Schneider Electric ART 960268 02/2010 MKTED208054EN-US Schneider Electric - North American Operating Division 2010 Modicon®  Premium™  automation  platform A full range of catalogs for Modicon® Premium™ automation  platform Catalog 2010 Detection Automation Automation Operator dialog Motion and Drives & & & & & Global Detection Electronic and electromechanical sensors Modicon® Momentum™ distributed I/O and control Twido® programmable controller and Twido Suite™ software Control and signalling components Lexium® 32 Servo Drives motion control Catalog 2009/2010 MKTED208052EN Photo-electric sensors Proximity sensors Capacitive proximity sensors Ultrasonic sensors Limit switches Pressure switches Rotary encoders Radio frequency identification Machine cabling accessories MKTED205061EN & Modicon® Quantum™ automation platform Catalog 2009 MKTED208011EN-US & Modicon® Premium™ automation platform Catalog 2010 MKTED208054EN-US & Modicon M340 and Unity software ® ™ DIA6ED2081007EN PLCs Discrete, analog I/O and application-specific solutions Communication DIA3ED2090202EN Controller base Discrete, analog I/O Communication & Automation functions, relays, interfaces and power supplies MKTED208031EN Control and signalling units Control stations & enclosures Cam switches Beacons and indicator banks Pendant control stations Controllers Emergency stops Foot switches & DIA7ED2090405EN-US Motion controllers Servo drives and Servo motors Stepper motors and drives Integrated drives Modicon Premium motion control modules & MKTED207031EN Human-Machine interfaces Soft starters and variable speed drives Smart relays Timing relays Measurement & control relays Analog interfaces Counters Plug-in relays Interfaces for discrete signals Power supplies & transformers MKTED206071EN MKTED206111EN Operator interface terminals Industrial PCs HMI and SCADA PC-based software Soft starters and variable speed drives Software PLCs and safety controllers programming software Software Vijeo Designer Operator terminal software Not all products shown in this catalog are available in every country Check individual country’s web site or Sales Office for product availability See on: www.schneider-electric.com Software Software for drives Motor control programming software Automation & Control functions Motor control & Motor starter solutions Control and protection components MKTED205103EN Contactors Circuit-breakers, fuse carriers Thermal relays Combinations, motor controllers Mounting solutions Motor starter mounting kits Machine safety This catalog contains Automation and Control function products relating to machines Safety & Preventa™ Machine Safety Products Catalog 2009 MKTED208051EN-US Safety PLCs Safety controllers Safety monitors Safety solutions on AS-Interface cabling system Safety switches Safety light curtains Safety mats Emergency stops Control stations Enabling switches Foot switches Beacons & indicator banks Switch disconnectors Thermal-magnetic motor circuit breakers Enclosed D.O.L starters Software XPSMFWIN configuration software XPSMCWIN configuration software Interfaces and I/O Power supplies & & Terminal blocks Phaseo® power supplies and transformers MKTED207011EN Terminal blocks Cable ends & Advantys™ STB IP 20 distributed inputs/outputs MKTED208053EN Modules for automation island Network interfaces Power distribution Digital I/O, analogs and application-specific Software STB configuration software DIA3ED2061209EN Switch mode power supplies Filtered rectified power supplies Transformers Systems & architectures This catalog contains Automation and Control function products relating to Communication & Machine & Installations with industrial communication MKTED207012EN Preferred implementations Ethernet TCP/IP, the universal communication standard CANopen for machines and installations AS-interface, simple and safe Products Human-Machine interface Controllers and PLCs Field devices Infrastructure and wiring Gateways Software and tools Collaborative Automation Partner Program & Partners General contents Modicon® Premium™ automation platform – Premium™ processors Unity™ selection guide 1/2 Unity processors 1/4 PL7™ selection guide 1/16 PL7 processors 1/18 – Racks, I/O architectures and power supplies Power supply and fan modules 2/2 Single rack configuration 2/6 Multi-racks configuration without remote module 2/8 Multi-racks configuration with remote module 2/12 – Discrete and analog I/O Discrete I/O modules 3/2 Analog I/O modules 3/20 Distributed I/O modules 3/28 TeSys® Quickfit for motor starter components 3/42 – Application-specific modules and solutions Preventa™ machine safety modules 4/2 Counter and electronic cam modules 4/18 Motion control modules 4/32 Integrated weighing system 4/54 Hot Standby redundancy (Unity) 4/60 Warm Standby redundancy (PL7) 4/70 – Communication Selection guides 5/2 Ethernet network - Transparent Ready® 5/12 CANopen machine bus 5/62 AS-Interface® sensor/actuators bus 5/68 X-Way™ bus and network 5/74 Modbus Plus™ network and Profibus DP/InterBus® buses 5/90 Modbus®, Uni-Telway™ and asynchronous serial links 5/100 – Software Unity™ software 6/2 PL7™ software 6/60 Vijeo® Citect® supervisory software 6/90 OPC Factory Server (OFS)™ software 6/100 – Human/Machine Interfaces Magelis® Small Panel units and terminals 7/2 Magelis Advanced Panel 7/4 HMI software 7/6 – Connection interfaces and power supplies Advantys™ Telefast® ABE 7 pre-wired system 8/2 Phaseo® Universal range power supplies 8/20 Phaseo AS-Interface® range switch mode power supplies 8/34 – Services Treatement for severe environments Conformal Coating Premium modules 9/2 TSX™ PSY power supply module selection document 9/6 Technical information Standards, certifications and environment conditions 9/8 Ethernet network, infrastructure 9/12 Automation product certifications 9/18 MFB (Motion Function Blocks) Library Motion Control 9/20 Index Product reference index 9/22 1 10 1/0 Contents chapter Modicon® Premium™ processors 1.1 - Premium processors - Unity™ Processors and slot-PLCs Selection guide ���������������������������������������������������� 1/2 b Premium processors v Presentation�������������������������������������������������������������������������������������������������� 1/4 v Description���������������������������������������������������������������������������������������������������� 1/5 v Memory structure������������������������������������������������������������������������������������������ 1/8 v Characteristics�������������������������������������������������������������������������������������������� 1/10 v References ������������������������������������������������������������������������������������������������ 1/12 b PCMCIA memory extension cards������������������������������������������������������������������ 1/14 1.2 - Premium processors - PL7™ Processors Selection guide���������������������������������������������������������������������������� 1/16 b Premium processors v Presentation������������������������������������������������������������������������������������������������ v Description�������������������������������������������������������������������������������������������������� v Characteristics�������������������������������������������������������������������������������������������� v Memory structure���������������������������������������������������������������������������������������� v References 1/18 1/19 1/20 1/22 1/23 b PCMCIA memory extension cards������������������������������������������������������������������ 1/24 10 1/1 Selection guide Modicon® Premium™ automation platform Premium processors Unity™ Pro software Premium™ platform for Unity™ Pro software offer TSX™ 57 0p processor TSX 57 1p processors g Number of racks (according to rack type) with 4, 6, or 12 slots with 4, 6, or slots or with 12 slots In-rack I/O (1) Analog I/O 256 channels (8-, 16-, 32- or 64-channel module) 12 channels (4-, 8- or 16-channel module) 512 channels (8-, 16-, 32- or 64-channel module) 24 channels (4-, 8- or 16-channel module) Max no of channels Integrated counter (max 40 kHz) Counter – Modules with 2/4 counter channels MHz max., single-channel electronic cam module Motion (2) Modules with 1/2 axes for stepper motors, 2/3/4 axes for analog control servo motors, 8/16 axes with SERCOS™ digital link Module for load cells (2 application-specific channels) TSX SCY in-rack communication modules (1 application-specific channel) RS 232, RS 485 or current loop (3) (4) master/slave PCMCIA modules and RS 485 master/ slave in-rack communication modules integrated RS 485 master/slave channel, RS 232, RS 485 or current loop (3) (4) master/slave PCMCIA modules and RS 485 master/slave in-rack communication modules integrated RS 485 channel, RS 232, RS 485 or current loop PCMCIA modules (3) (4) and RS 485 in-rack communication modules in-rack module in-rack modules In-rack applicationspecific channels Serial link connections Character mode Bus connections Weighing Serial links Modbus® Uni-Telway™ Discrete I/O Network connections AS-Interface® actuator/sensor bus master V2 CANopen machine bus master V4.02 InterBus® fieldbus master V2 (5) or Profibus DP™ fieldbus master V0 Class 1 and 2 (5) Ethernet Multiprotocol in-rack modules (Modbus /TCP, Uni-TE™, Global Data, I/O Scanning, TCP Open), Web server, FactoryCast™ server or FactoryCast HMI server Fipway module (4), Ethway in-rack modules Modbus Plus (3), Fipway (3)(4) modules, Ethway in‑rack modules Configurable loops Programmable loops – Process control EFB library – Without PCMCIA extension 96 Kb program and data With PCMCIA extension 128 Kb program 224 Kb program 96 Kb data 96 Kb data 256 Kb (PCMCIA extension in upper slot (0) on processor) – 100…240 V a, 24 c non-isolated and 24…48 V c isolated power supply A power supply is required for each rack Data storage USB programming port Power supply Premium processor Integrated Ethernet (9) Integrated CANopen 96 Kb program and data TSX P57 104M TSX P57 1634M Standard TSX P57 0244M g TSX P57 154M (11) Pages 1/12 (1) The maximum values for the numbers of discrete and analog I/O are cumulative (with the exception of TSX H57 24M/44M Hot Standby processors) (2) 1 axis = application-specific channel, except for SERCOS modules where, depending on the configuration, the module = 2…32 channels (3) Module to be inserted into the lower PCMCIA slot (no 1) (4) Module to be inserted into the TSX SCY 21 601 in-rack communication module slot (5) The InterBus and Profibus DP limits are not cumulative (11) The TSX P57 154M processor does not support the CANopen bus PCMCIA module Integrated Fipio® 10 – Hot Standby availability Memory capacity PCMCIA module (3) Max no of networks Fipway®/Ethway™/Modbus Plus™ modules Integrated process control integrated PCMCIA module 1/2