NWD-105324-01E P N M T ASOLINK ETWORK PNMT (Java version) Installation Manual (Windows7) ANAGEMENT ERMINAL NEC Corporation Copyright © 2010 NWD-105324 Table of Contents Installation Sequence Phone and Modem Options Setting (Standard 19.2Kbps Connection) 3 Installation of USB Modem Driver (USB Connection) Dial-up Setting 15 SNMP Service Setting 24 PNMT Setup 26 Firewall Setup 31 Firewall Setup (with Advanced Security) 33 Network Connections Setting on Windows 38 10 PNMT Launching 42 -i- NWD-105324 Installation Sequence Only Administrator group privilege level users are authorized to configure the following settings, (1) Dial-up Connection Step 1: Modem Setting Network Element (NE) other than PASOLINK NEO ONLY PASOLINK NEO Standard 19200bps Modem Setting USB Modem Setting (Phone and Modem Options Setting) (Installation of USB Modem Driver) Step 2: Dial-up Connection Setting Step 3: SNMP Service Setting Step 4: PASOLINK Network Management Terminal (PNMT) Setup Step 5: Firewall Setup Firewall is disabling on the Dial-up Firewall is enabling on the Dial-up Connections Connections Step 5: Firewall Setup Step 5: Firewall Setup with Advanced Security (with Advanced Security) Step 6: Launching PNMT -1- NWD-105324 (2) Ethernet Connection Step 1: PASOLINK Network Management Terminal (PNMT) Setup Step 2: Network Connections Setting Step 3: Launching PNMT -2- NWD-105324 Phone and Modem Options Setting (Standard 19.2Kbps Connection) This section deals with the use of a Standard 19.2Kbps Modem Dial-up connection (for non-PASOLINK-NEO network elements) If you wish to use a USB Modem Driver (for PASOLINK-NEO network elements, please refer to ”3 Installation of USB Modem Driver (USB Connection)”, p.9 (1) Click Start | Settings | Control Panel (2) Change to Large icons -3- NWD-105324 (3) Click the Phone and Modem icon in the Control Panel window to start configuring the modem (4) If Location Information window will appear, enter your country and area code and then click [OK] -4- NWD-105324 (5) Verify the Location and Area Code (6) Select the Modem tab Click [Add] to continue with adding the new modem for the PNMT -5- NWD-105324 (7) Check Don’t detect my modem and click [Next] to continue (8) Select Standard Modem Types from the list of Manufacturers and Standard 19200bps Modem from the Models Click [Next] to continue -6- NWD-105324 (9) Select Selected ports and COM#, then click [Next] to continue (10) Click [Finish] to complete the new modem installation -7- NWD-105324 (11) Verify that Standard 19200 bps Modem and COM1 are displayed Click [OK] (12) Please proceed directly to section Dial-up Setting -8- NWD-105324 Firewall Setup (1) Go to Control Panel. Click Windows Firewall (2) Select Turn Windows Firewall on or off - 31 - NWD-105324 (3) Check mark on Turn on Windows Firewall - 32 - NWD-105324 Firewall Setup (with Advanced Security) This procedure enables Run PNMTj with Firewall (1) Click Start | Control Panel and the Administrative Tools icon to start configuring Firewall (2) Double-Click Windows Firewall with Advanced Security - 33 - NWD-105324 (3) In the Windows Firewall with Advanced Security.Window appears Click Inbound Rules and New Rule on Actions (4) In the Window appears select Custom And click [Next] - 34 - NWD-105324 (5) Select This program path and Click Browse Select the pnmt on “PNMTj Install PATH\bin” Click [Next] (6) Select Protocol type ICMPv4 and Click [Next] - 35 - NWD-105324 (7) Retain the default setting Click [Next] (8) Retain the default setting Click [Next] - 36 - NWD-105324 (9) Retain the default setting Click [Next] (10) Input Name filed and Description field and Click [Finish] - 37 - NWD-105324 Network Connections Setting on Windows This section describes the network setting for 5000S If you don’t wish to connect to 5000S, please precede directly 10 PNMT Launching (1) Select Start Control Panel (2) Select the Network and Sharing Center from the Control Panel window - 38 - NWD-105324 (3) Select Change adapter settings - 39 - NWD-105324 (4) Select the Network Connections from the Network and Internet Connections window Right click the Local Area Connection and select the Properties from the context menu (5) The following Local Area Connection Properties window will appear as default Select the Internet Protocol Version (TCP/IPv4), then click on the Properties button - 40 - NWD-105324 (6) The following Internet Protocol Version (TCP/IPv4) Properties window will appear Select the Use the following IP Address instead of the Obtain an IP address automatically Set the IP address, Subnet mask and Default gateway as follows: Item Setting IP Address 172.17.254.254 Subnet mask 255.255.255.252 Default gateway 172.17.254.253 DNS server address is not required - 41 - NWD-105324 10 PNMT Launching (1) Right click on PNMT and then click “Run as Administrator” to start the application (2) If following window will appear, select [Allow access] - 42 - NWD-105324 (3) Enter User name and Password, and Select the Connection Entry After installation of the PNMT, the initial password will be:User name: admin Password: (There is no initial password Just press Enter A password can then be set.) Connection: In case of connection to 5000S select Ethernet and PNMT (LAN/Direct) entry Otherwise select Dialup and PNMT(RS232C)/PNMT(USB) entry (4) Click [Login] - 43 - NWD-105324 (5) If following window will appear, select [Public Location] (6) After This Dialog Click [Close] - 44 - NWD-105324 NOTE If another application is using the SNMP Port, application initialization will not be possible; the application will shut down, and the following message will appear - 45 - ... Launching PNMT -1- NWD-105 324 (2) Ethernet Connection Step 1: PASOLINK Network Management Terminal (PNMT) Setup Step 2: Network Connections Setting Step 3: Launching PNMT -2- NWD-105 324 Phone... NWD-105 324 (5) In the New Connection Wizard window, input connection name and Dial-up phone number field Check Don’t connect now and click [Next] In case of connecting with RS232C-Type [PNMT( RS232C)]... setting] in the Connect Dial-up Connection window (9) Select Connection and Right Click , Appear context menu and select Connection’s properties RS232C setting USB setting - 20 - NWD-105 324 (10) In the