Ô tô Camry 3.5Q - Phần 1 Phần 1 (Tài liệu bằng tiếng anh) gồm: - Kết cấu thân xe - Kết cấu phần điện - CHASSIS - Kích thước xe - Động cơ xe
CHASSIS– STEERING01YCH109TESteering Lock AssemblyLock/ Unlock MotorLock/Unlock DetectionSwitchPower Supply for Lock/Unlock MotorLock Bar Position Detection SignalSteering Lock ECUPower Supply for Lock MotorUnlock SignalLocalCommunicationMain Body ECUCertification ECUID Code BoxEngineStartSignalEngine SwitchService TipIt is not possible to replace only the steering lock ECU in the steering lock assembly. Therefore, ifa malfunction occurs in the ECU, the entire steering lock assembly must be replaced.CH-180JSTEERING LOCK SYSTEMAccording with the use of the smart entry and start system with push-button start, a steering lock systemwhich uses a lock/unlock motor to lock and unlock the steering wheel is used. This system consists mainlyof the steering lock assembly, main body ECU, certification ECU and ID code box.DThe steering lock ECU is integrated in the steering lock assembly, and it controls the lock bar operationin the steering lock assembly through the control of the lock/unlock motor.DThe steering lock ECU detects the position (lock/unlock) of the lock bar and transmits this informationto the main body ECU and certification ECU.DIn this system, the certification ECU determines whether to lock or unlock the steering based oncommunication with the main body ECU. Then, the certification ECU sends lock or unlock commandsignals to the steering lock ECU through the ID code box. Upon receiving the signals, the steering lockECU operates the lock/unlock motor to lock or unlock the steering. For details, see page BE-138." System Diagram A . lock assembly must be replaced.CH -1 8 0JSTEERING LOCK SYSTEMAccording with the use of the smart entry and start system with push-button start, a steering lock. lock/unlock motor to lock or unlock the steering. For details, see page BE- 13 8 ." System Diagram A