Phần 1 (Tài liệu bằng tiếng anh) gồm: - Kết cấu thân xe - Kết cấu phần điện - CHASSIS - Kích thước xe - Động cơ xe
BEBODY ELECTRICAL – LIGHTING02KBE18YKey Unlock Warning Switch*1Ignition*1/Engine*2 Switch(IG1 Relay, ACC Relay)Courtesy Switches (All Door)Door Position Switches (All Door)Certification ECU*2Entry Illumination SignalCAN(MS Bus)MainBodyECUIgnition Switch*1IlluminationInterior LightFoot Well Illumination*3Door Inside HandleIllumination*3Engine Switch*2IlluminationBE-39JILLUMINATED ENTRY SYSTEM1. GeneralD The illuminated entry system of the new Camry controls 4 kinds of light: interior light, ignitionswitch*1/engine switch*2 illumination, foot well illumination*3 and door inside handle illumination*3.D The interior light is operated when the light switch is in the DOOR position." System Diagram A*1: Models without the smart entry and start system*2: Models with the smart entry and start system*3: Only for E and G grade models for Taiwan and Thailand, G grade models for Indonesia and thePhilippines, and E grade models for Vietnam BODY ELECTRICAL – LIGHTING02KBE19TEDoor Lock AssemblyD Door Position SwitchInterior Light*1Door Courtesy SwitchDoor Lock AssemblyD Door Position SwitchesDoor Courtesy SwitchesDoor Courtesy SwitchInterior Light*3Light Switch*3Overhead ConsoleCertification ECU*4Door Inside Handle*2Key Unlock Warning Switch*5Main Body ECUEngine Switch*4Ignition Switch*5BE-402. Layout of Main Components*1: Only for models without the sliding roof system*2: Only for E and G grade models for Taiwan and Thailand, G grade models for Indonesia and thePhilippines, and E grade models for Vietnam*3: Only for models with the sliding roof system*4: Only for models with the smart entry and start system*5: Only for models without the smart entry and start system BEBODY ELECTRICAL – LIGHTING02KBE128YLight OFF StateCondition (2)Condition (4)Condition (1)Light ON State(15 second duration)*1Condition (3)Condition (6)Condition (5)Light ON State(Constantly ON)Condition (2)BE-413.Interior Light ControlDThe interior light control (interior light and ignition switch illumination*1/engine switch illumination*2)consists primarily of the fade-in/fade-out function and timer illumination function.DThe interior light control activates as described in the diagram below when one of items is in the respectivestate.DThis control is controlled by the main body ECU.*1: Models without the smart entry and start system*2: Models with the smart entry and start systemConditionItemCondition (1)DWith power source*2 OFF and all doors closed, any door is unlocked.DWith all doors closed, power source*2 is changed from ACC to OFF.DWith power source OFF and all doors closed, key enters any actuation areaaround the doors. (Only for models with smart entry and start system)Condition (2) DAny door is open.Condition (3) DWith power source*2 OFF, all doors are closed, any door is unlocked.Condition (4)DPower source*2 is ACC or ON.DMore than 15 seconds have elapsed since the Light ON State (15 secondduration)*1.DWith power source*2 OFF and all doors closed, all doors are locked.Condition (5) DWith power source*2 ACC or ON, all doors are closed or locked.Condition (6)DWith power source OFF and all doors closed, key enters any actuation areaaround the doors. (Only for models with smart entry and start system)DWith power source*2 OFF and all doors locked, any door is unlocked.*1:The function setting can be changed using the customized body electronics system. For details, refer toCustomized Body Electronics System section on page BE-14.*2: The power source condition can be changed by operating the engine switch on models with the smartentry and start system, and the ignition switch on models without the smart entry and start system. BODY ELECTRICAL– LIGHTING241BE33Condition (9)Light OFF StateCondition (7)Condition (4)Condition (1)Light ON State(15 second duration)*Light Adjustment State(Approx. 10% brightness of Light ONState)*Condition (3)Condition (2)Condition (5)Light ON State(Constantly ON)Condition (6)BE-424.Foot Well Illumination and Door Inside Handle Illumination ControlDThe foot well illumination control consists primarily of the fade-in/fade-out function and timerillumination function.DThe foot well illumination control activates as described in the diagram below when one of items entersthe respective state.DThis control is controlled by the main body ECU.ConditionItemCondition (1) DWith power source*1 OFF and all doors closed, any door is unlocked.Condition (2)DAny door is open.DWith shift lever at P position, power source*1 is changed from OFF to ON.Condition (3)DWith power source ACC or OFF*1, all doors are closed.DWith all doors closed, power source*1 is changed from ON to OFF.Condition (4)DMore than 15 seconds have elapsed since start of the Light ON State (15seconds duration)*2.DWith power source*1 OFF and all doors closed, all doors are locked.Condition (5) DShift lever is put into other than P position with power source*1 ON.Condition (6)DWith power source ON, shift lever is put into P position or any door isopened with shift lever in any position except P.Condition (7)DWith shift lever in other than P position, power source*1 is changed fromOFF to ON.Condition (8) DWith power source*1 OFF and all doors locked, all doors are closed.Condition (9)DAny door is open.DWith shift lever in P position, power source*1 is changed from OFF to ON.*1:The power source condition can be changed by operating the engine switch on models with the smartentry and start system, and the ignition switch on models without the smart entry and start system.*2:The function setting can be changed using the customized body electronics system. For details, refer toCustomized Body Electronics System section on page BE-14. BEBODY ELECTRICAL – LIGHTINGBE-435. Battery Saving ControlWhen the following two conditions have been met, battery saving control turns off the lights illuminated bythe illuminated entry controls. Battery saving control is controlled by the main body ECU.D The power source is OFF (models with smart entry and start system), or the ignition key is not in theignition key cylinder (models without smart entry and start system).D There is no change in the condition of the doors for 20 minutes. . Switch*1IlluminationInterior LightFoot Well Illumination*3Door Inside HandleIllumination*3Engine Switch*2IlluminationBE -3 9 JILLUMINATED ENTRY SYSTEM1. GeneralD. LIGHTING241BE33Condition (9)Light OFF StateCondition (7)Condition (4)Condition (1) Light ON State (15 second duration)*Light Adjustment State(Approx. 10 % brightness