1. Trang chủ
  2. » Kỹ Thuật - Công Nghệ

Giáo trình công nghệ chi tiết sử dụng ắc QUY năng lượng xanh EV805 210 x

4 78 0

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 4
Dung lượng 259,87 KB

Nội dung

EV805-210-X Advanced AGM Dry Cell Technology Vision EV Series Dry Cell Batteries provide superior performance, capacities and reliability Using state of art dry cell technology the EV series is designed for environmentally sensitive areas that require enhanced cycle life capabilities in commercial, industrial, residential, and private applications The maintenance-free (VRLA) construction and advanced design features makes the EV Series the definitive choice for a wide variety of markets; Solar and Renewable Energy Storage; Electric Vehicle and Golf cart; Industrial equipment, Floor Machines, Fork lifts, Aerial lifts, and Robotics; Marine, RV, and no-idle solutions; Mobility and Medical Equipment; Telecom, Broadband and Cable TV; UPS systems Features & Benefits Vision EV Series • Completely sealed valve regulated construction • Flame arresting pressure regulated safety sealing valves for safety, operating pressure management and protection against atmospheric contamination (excess oxygen being absorbed by negative plates) • Computer-aided 99.994% pure heavy-duty lead calcium grid designs • Tank formed plates guarantees evenly formed and capacity matched plates • Anchored plate groups to guard against vibration • Double insulating Micro porous glass fiber separators • Measured and Immobilized electrolyte • Vacuum filling and weighing processes • Advanced technology for efficient gas recombination of up to 99.9% and freedom from electrolyte maintenance • Wide range of operating temperatures (-40°C to 60°C) • Low self discharge rates (Approx 1%-3% monthly at 20 °C–25°C / 68°F–77°F) • High impact reinforced strength copolymer polypropylene cases and flat top designed covers that are rugged and vibration resistant • Thermally welded case to cover bonds that eliminate leakage • Copper and stainless steel alloy terminals and hardware • Multi-terminal options • Terminal protectors • Removable carry handles • Industry leading size and performance options • Classified as “NON-SPILLABLE BATTERY” Not restricted for Air (IATA/ICAO) Provision 67, Surface (DOT-CFR-HMR49)or Water (Classified as non-hazardous per IMDG amendment 27) transportation • Can be used in multiple orientations (upside down is not recommended) • Compatible with sensitive electronic equipment • Quality Assurance processes with ISO (4400/992579), QS and TUV Certification EMC tested, CE, ETTS Germany (G4M19906-9202-E-16) UL recognized and approved components (MH25860) • Tellcordia and Bellcore compliant ISO 14001 DIN ISO 9001/QS9000 MH25860 Complies with DOT provisions listed in 49CRF173.159 (d) Special provision A67 www.vision-batt.com page of EV805-210-X Mechanical Characteristics L W H TH Weight in Terminals in(mm) in(mm) in(mm) in(mm) Lbs (Kgs) F20 (M8) 10.2 (260) 7.1 (180) 13.7 (347) 14.5 (368) 102 (46.3) 260±2 368±2 (optional) 347±2 805 Volts Approx 180±2 45 Type No Dimensions in Inches (mm) Standard 128 M8 17 Industry www.vision-batt.com page of EV805-210-X Electrical Specifications Ampere Hour Capacity Minutes of Discharge 100HR @25A 10HR 5HR Cranking Amps R/C @25A 32°F/ 0°C 0°F/ -18°C @75A * - Performance averages after 15 cycles 203 175 156.5 440 105 478 Constant current discharge ratings-amperes at 20℃(68℉) End Point Volts/cell 30min 45min 60min 3h 1.60 234 171 132 54 1.65 225 164 127 52 1.70 215 157 122 50 1.75 206 150 117 48 1.80 196 143 112 46 5h 34.8 33.7 32.5 31.3 30.2 Constant power discharge ratings-watts per cell at 20℃(68℉) End Point Volts/cell 30min 45min 60min 2h 1.60 412 304 235 136 1.65 400 296 229 133 1.70 389 288 223 130 1.75 377 280 217 127 1.80 365 271 211 124 Internal resistance 1050 10h 19.0 18.5 18.0 17.5 17.0 3h 104 101 98 96 93 100h 2.20 2.14 2.09 2.03 1.97 5h 67 66 65 63 62 Fully charged at 20℃: 2.6 mOhms Self discharge Operating temperature range 1400

Ngày đăng: 23/04/2019, 22:10