Catalogue cấu tạo chi tiết sử dụng ắc QUY UPS CP632

CP632 Shenzhen Center Power Tech.Co.Ltd, 6V 3.2Ah(20hr) Overview The rechargeable batteries are lead-lead dioxide systems The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized Should the battery be accidentally overcharged producing hydrogen and oxygen, special oneway valves allow the gases to escape thus avoiding excessive pressure build-up Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position Battery Construction Component Positive plate Negative plate Raw material Lead dioxide Lead Container Cover ABS General Features Maintenance-free operation Low self discharge Case and cover available in both standard and flame retardant ABS Dimensions and Weight * Weight deviation: ± 5% Terminal Separator Electrolyte Rubber Copper Fiberglass Sulfuric acid Battery Specification Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding Not restricted for air transport-complies with IATA/ICAO Special Provision A67 UL-recognized component Can be mounted in any orientation Computer designed lead, calcium tin alloy grid for high power density Long service life, float or cyclic applications Length(mm / inch) Width(mm / inch) Height(mm / inch) Total Height(mm / inch) Approx Weight(Kg / lbs) Safety valve ABS 134 / 5.27 34 / 1.34 61 / 2.40 67 / 2.64 0.65 / 1.43 Performance Characteristics 6V years Nominal Voltage Number of cell Design Life Nominal Capacity 77℉(25℃) 20 hour rate (0.16A, 5.25V) 10 hour rate (0.31A, 5.25V) hour rate (0.57A, 5.25V) hour rate (2.10A, 4.8V) Internal Resistance Fully Charged battery 77℉(25℃) Self-Discharge 3% of capacity declined per month at 20℃(average) Operating Temperature Range Discharge Charge Storage Max Discharge Current 77℉(25℃) Short Circuit Current 3.2Ah 3.1Ah 2.85Ah 2.10Ah ≤30mOhms -20~60℃ -10~60℃ -20~60℃ 48A(5s) 160A Discharge Constant Current (Amperes at 77oF25oC) End Point Volts/Cell 1.60V 5min 10min 15min 30min 1h 3h 5h 10h 20h 13.0 8.80 6.10 3.70 2.10 0.89 0.62 0.33 0.17 0.16 1.65V 12.3 8.38 5.83 3.55 2.02 0.86 0.60 0.32 1.70V 11.6 7.94 5.55 3.40 1.94 0.83 0.59 0.32 0.16 1.75V 10.9 7.50 5.26 3.23 1.86 0.80 0.57 0.31 0.16 1.80V 10.2 7.05 4.97 3.06 1.77 0.76 0.55 0.30 0.16 Discharge Constant Power (Watts at 77oF25oC) End Point Volts/Cell 1.60V 5min 23.0 10min 15.3 15min 30min 11.80 7.17 45min 5.33 1h 4.10 2h 2.42 3h 1.81 5h 1.24 1.65V 21.6 14.4 11.20 6.81 5.09 3.93 2.35 1.77 1.22 1.70V 20.2 13.6 10.60 6.44 4.83 3.75 2.27 1.72 1.19 1.75V 18.7 12.7 9.89 6.07 4.57 3.56 2.18 1.67 1.17 1.80V 17.4 11.8 9.24 5.69 4.31 3.37 2.08 1.61 1.14 (Note)The above characteristics data are average values obtained within three charge/discharge cycles not the mimimum values.All data shall be changed without notice,Vision reserves the right to explain and update the information contained hereinto Shenzhen Center Power Tech.Co.Ltd, STOCK CODE: 002733 www.vision-batt.com 6.5 6V 3.2Ah(20hr) Constant voltage charging characteristic (0.25CA,25 ℃) (%) (XCA) (V) 140 6.0 5.5 Voltage(v) Current Charged Volume Discharge characteristic (25℃) Voltage CP632 Shenzhen Center Power Tech.Co.Ltd, 5.0 120 0.25 100 0.20 80 4.5 0.15 60 4.0 0.10 40 10 20 30 60 10 20 30 20 0.05 0 h 7.5 Charged Volume 7.0 Charge Voltage 6.5 6.0 5.5 Charging Current 10 Discharge time 14 16 18 20 Charging time (hours) Relationship between charging voltage and temperature Self-discharge characteristic 100 7.8 Capacity(%) Cycl 7.5 e Us e 7.2 STANDB 6.9 Y USE 90 80 70 60 6.6 -10 12 50 40 30 20 10 Ambient temperature(℃) 40 60 50 10 12 14 Storage time: months 16 18 20 Cycle service life in relation to depth of discharge Life characteristics of Standby use 120 120 100 60 Capacity(%) 80 Testing conditions:floating voltage:2.27 to 2.30V Cell ambient temperature:25℃(77 oF) 80 60 40 40 20 20 Life(year) 30% Depth of discharge 100% D.O.D 50% D.O.D 200 Temperature effects on float life 400 600 800 1000 Number of cycles(cycles) 1200 1400 Temperature effects on capacit 10 120 100 2.30V Cell Capacity (%) Capacity(%) 100 C 0.05 0.1C C 02 80 60 1.0C 2.0C 40 3.0C 20 0.1 10 20 30 40 50 60 Temperature ( ℃) Shenzhen Center Power Tech.Co.Ltd, -20 -10 10 20 30 40 50 Temperature ( ℃) STOCK CODE: 002733 www.vision-batt.com ... (XCA) (V) 140 6.0 5.5 Voltage(v) Current Charged Volume Discharge characteristic (25℃) Voltage CP632 Shenzhen Center Power Tech.Co.Ltd, 5.0 120 0.25 100 0.20 80 4.5 0.15 60 4.0 0.10 40 10 20