Innovation and exports of vietnamese SMEs evidence from firm level data

The influence of subcontracting activities on the innovation UNIVERSITY OF ECONOMICS December 5, 2017 ERASMUS UNVERSITY ROTTERDAM HO CHI MINH CITY INSTITUTE OF SOCIAL STUDIES VIETNAM NETHERLANDSTHE VIETNAM – THE NETHERLANDS PROGRAMME FOR M.A IN DEVELOPMENT ECONOMICS THE INFLUENCE OF SUBCONTRACTING ACTIVITIES ON THE INNOVATION IN VIETNAMESE SMALL AND MEDIUM-SIZED ENTERPRISES A thesis submitted in partial fulfillment of the requirements for the degree of MASTER OF ARTS IN DEVELOPMENT ECONOMICS By NGUYEN QUANG HUNG Academic Supervisor: LE VAN CHON PhD HO CHI MINH CITY, December 2017 The influence of subcontracting activities on the innovation December 5, 2017 ABSTRACT This study investigates the impact of subcontracting activities on the innovativeness of Vietnamese subcontractors in Small and Medium-Sized Enterprise (SME) sector The study approached two main theories of transaction cost (TCE) and knowledge-based theory The data was drawn from the rich data set of Vietnamese SMEs in 2015 The empirical test used the probit model to examine 271 subcontractors to give the evidence that subcontracting activities with the foreign-invested contractor are likely to innovate rather than with domestic contractors In addition, the results have suggested that the absorptive capacity is very important for innovation of a small firm In this thesis, based on the paper of Cohen and Levinthal (1990), the formation of the absorptive capacity is generated by skilled staffs and training activities in the firm The findings showed that the innovative probability of subcontractors is positively affected by subcontracting activities in foreign-invested sectors and the absorptive capacity Key words: knowledge, innovation, subcontracting activity, Vietnamese SME ABBREVIATION FDI Foreign direct investment LEs Large firms MNCs Multinational Corporations OECD Organization for Economic Co-operation and Development R&D Research and Development SOEs State-owned enterprises SME Small and Medium-sized Enterprise TCE Transaction cost economics TFP Total factor productivity The influence of subcontracting activities on the innovation CHAPTER December 5, 2017 INTRODUCTION 1.1 Research context 1.2 Problem statement 1.3 Research objective 1.4 Research question 1.5 Scope of the study 1.6 Structure of thesis CHAPTER LITERATURE REVIEW 10 2.1 Theoretical framework 10 2.2 Innovation in subcontracting 12 2.3 The role of the subcontractor in the supply chain and its innovative capability 15 2.4 Transaction cost theory (TCE) 20 2.5 Knowledge-based theory 23 2.6 Empirical review 32 CHAPTER 3.1 DATA AND RESEARCH METHODOLOGY 34 Data and sample 34 3.1.1 Small Medium – sized Enterprises (SMEs) 34 3.1.2 Data of Vietnamese Small and medium-sized enterprises 35 3.1.3 Sampling 36 3.2 Definition and classification 37 3.2.1 Definition of Innovation 37 3.2.2 Definition of Subcontracting 39 3.3 Research methodology 41 3.3.1 Transaction cost approach 42 3.3.2 Knowledge-based approach 43 3.4 Analytical frmework 48 3.5 Variables and measurement 48 3.5.1 Data description 48 3.5.2 Dependent variable 50 3.5.3 Independent variables 51 The influence of subcontracting activities on the innovation 3.5.4 3.6 December 5, 2017 Description of variables and expected sign 55 Analytical method 58 3.6.1 Empirical model, estimation method 58 3.6.2 The identification strategy 60 CHAPTER EMPIRICAL RESULT 61 4.1 Descriptive statistics 61 4.2 Regression Results 62 4.3 Results interpretation 63 CHAPTER CONCLUSION AND POLICY IMPLICATION 72 5.1 Conclusion 72 5.2 Implications 74 5.2.1 Policy implication 74 5.2.2 Managing implication 75 5.3 Limitations 75 5.4 Future research 76 REFERENCES 77 APPENDIX 87 The influence of subcontracting activities on the innovation December 5, 2017 List of Figure Figure Theoretical framework 12 Figure The mutual benefit relationships between contractors and subcontractors 16 Figure Structure of subcontracting system 17 Figure Knowledge-creation process - SECI model 29 Figure The level of subcontractor in chain structure 41 Figure Analytical frmework 48 List of Table Table Summary of advantages of star- and tier-shaped structure 18 Table Classification of Small-, and Medium-sized enterprises 35 Table Sample of Vietnamese subcontractors 37 Table The rate of innovation of subcontractors 49 Table The rate of innovation of subcontractors of foreign-invest enterprises of the sample 49 Table Statistic of number of innovators of the sample by type of enterprise 50 Table Statistic of enterprises of the sample classification by total labor force 50 Table Independent variables 55 Table Summarizing the variables 61 Table 10 Regression Results 62 The influence of subcontracting activities on the innovation CHAPTER December 5, 2017 INTRODUCTION 1.1 Research context After nearly three decades, Vietnam officially began to adopt ‘Doi Moi’ (renovation) policy under the pressure in economic reform but until the year of 1989 Vietnam implement indeed a comprehensive and radical reforming program; Vietnam has shifted from centrally planned economy to socialistoriented market economy, aims to stabilization and openness As a result, the economy experienced rapid growth during the period of the 1990s, Vietnam became one of the fastest-growing countries in the world with the annual average growth rate of this period was up to 7.76%1 Vietnam has attained impressive achievements and succeeded to process of international economic integration Since launching the renovation programme in the early 1990s, small and medium-sized enterprises (SMEs) emerge as a dynamic force, they account for a large proportion of Vietnamese enterprises In line with renovation policy, they are on top of structured transformation In the meaning of development, the reform of economic environment has positively affected entire Vietnam economy in general and on the development of small and medium-sized enterprises in particular Vietnamese small and medium-sized enterprises and the private sector are continuously the main engines of contribution to growth in Vietnam economy With the dominant force in the economy, small and medium-sized enterprises are playing a critical role, which has overwhelmed Vietnam economy’s development At end of 2015, the number of small and mediumsized enterprises accounts for 98%2 of entire enterprises in nationwide; the velocity of the number of small and medium-sized enterprises in the period 2000 - 2015 is averagely 18.1% They are a prime source of job creation, Statistic from Work bank data (2016) 45th Small and Medium Enterprises Working Group Meeting organized 13 September 2017 in Ho Chi Minh City (link: https://apecceosummit2017.com.vn/45th-small-and-medium-enterprisesworking-group-meeting-104.html) The influence of subcontracting activities on the innovation December 5, 2017 wealth distribution, poverty alleviation, and innovation as well Therefore, they become an important part of the national development and have been viewed as the backbone of the economy In the early stage of transition, Vietnamese small and medium-sized enterprises were facing many inherent constraints on an underdeveloped country, such as lack of production land, capital for business activities, market information, skilled labor force, modern technology, and investment, etc Thanks to the open-door policy, traditional barriers were gradually detached Vietnamese enterprises have approached opportunities for integrating with the rest of the world In the globalization and technological information era, the challenge also increases the threat from their counterparts in international play-fields These are public issues debating in many literatures and it is also concerns of many researchers and policymakers Theorists and scholars have shown that the innovation is an appropriate solution for firms to create and maintain the competitive advantage So, studying in innovation is necessary for Vietnamese Small and medium-sized enterprises in the context of globalization 1.2 Problem statement In Vietnam, Small and medium-sized enterprises account for a large portion of total enterprises The major roles of Small and medium-sized enterprises in the economic development of a country are job creation, nurturing the growth of the labor market, and reducing the development gap among localities, and countries In their evolution progress, small and medium-sized enterprises have faced almost constraints and significant challenges such as high production costs, poor quality of products and services, low degree of innovation, many difficulties in access finance, weak management skills and expertise, lack of market information, and so forth Competitive abilities of Small and medium-sized enterprises in local and global markets are also weak due to obstacles of information, domestic and The influence of subcontracting activities on the innovation December 5, 2017 international regulations, absorbing and accessing technological advantage, and so on The globalization process has dramatically changed This process increases abilities of countries to access new information and markets in both domestic and international Vietnamese economy has integrated into the international economy that has opened a great opportunity for Vietnamese small and medium-sized enterprises to take part in the production chains However, they did not develop full awareness and did not pay adequate attention to the participation in and appreciate the benefits of participation in production chains nor take into account it as a tool, a means of survival, of adding value and of improving the efficiency of their production process Moreover, the globalization process gives rise to the capital flows move in the developing countries, and thus it also increases the opportunities for foreign countries to take part in the exploitation of the domestic market size, as a result, the competitive degree becomes larger in the host countries However, the globalization and competition commonly not always create the threat for enterprises in the host countries In a certain aspect, the challenges from the globalization produce motivation for firms to development by enhancing operational effectiveness and productivity For this reason, the ideal ways for the firm to survive are the innovation and participation in regional and/or global production chains (Harvie, Narjoko, & Oum, 2010) The innovation is extremely important for development and sustaining the productivity, growth, and development of a country in general as well as a firm in particular In the macro level, the innovation is the shortest way to fill the development gap between countries For firm level, the recognition of innovation is a vital factor A large number of studies have documented that innovation is a key driver to lead an increase in competitive advantages In the last decades, most studies of creativeness and/or innovativeness in enterprises concentrate on exploiting the relationships between innovation The influence of subcontracting activities on the innovation December 5, 2017 and trade, innovation and productivity, or finding the determinants effect on innovation In fact, studies of the relationship between the innovation and subcontractor are a little, especially in the developing world Subcontracting activities are becoming a key factor of industrialization in most countries in the world In the Organization for Economic Co-Operation and Development (OECD) countries, subcontractors are crucial elements for establishing production value chains The integration companies require their subcontractors having the innovativeness to contribute to value chains Contractors and subcontractors together set up an ecosystem, which is formed industrial clusters for development and enhancing competencies In which, innovative activities are a primary concern In Vietnam, subcontractors are firms that almost take part in the processing, assembling, or manufacturing peripheral products for large companies (e.g multinational corporations), or foreign direct investment (FDI) enterprises Excluding several industries that involved the foreigninvested sector, most domestic manufacturing enterprises have operated in the low added-value industries In addition, most subcontractors lack the cohesion or it is very weak Accordingly, their competitive and innovative capabilities are low (even in cognition) Due to low innovative ability, Vietnamese small and medium-sized enterprises concentrate on low laborcost or labor-intensive production activities that they have the competitive advantage compared to regional counterparts Many papers focus on analyzing the role of the subcontractor in developed countries (e.g OECD countries) where the development and the technological degree are very high, and they involve into global value chains from the initial stages (e.g design stage) to ultimate stages (e.g end-used product stage) Studies of the manufacturing subcontractors in Vietnamese small and medium-sized enterprises sector are virtually rare Most research of Vietnamese small and medium-sized enterprises accrue to the subcontracting activities in supporting industries (automobile, electronics, and electricity) In The influence of subcontracting activities on the innovation December 5, 2017 these industries, enterprises are relatively mature and larger than small and medium-sized enterprises Besides, some existing theories cannot be applied to examine the innovativeness of the Vietnamese small enterprises due to the knowledge and technology gap Therefore, this study will contribute significant findings and open the new direction to attract policy-makers, scholars for deeply study in this field in order to enhance competencies of Vietnamese small and medium-sized enterprises in general and the subcontractor in particular 1.3 Research objective Since the innovation plays the important role in the survival and maintains the competitive advantage for the subcontractor, so the main objective is to explain the innovativeness of them through subcontracting activities For that reason, the thesis will discuss the issue involved the subcontracting activities of Vietnamese subcontractor in the SME sector through subcontracting agreements and investigate their knowledge-creation abilities through the absorptive capacity that enhance the innovation likelihood of the firm Firstly, the thesis will examine the innovativeness in subcontracting activities of the subcontractor through subcontracting agreements In which, the subcontracting relationships, with contractors in the domestic and foreigninvest sectors, are separated into two groups Based on that, the thesis specifically assesses the subcontracting activities at which sector are more likely to innovate Secondly, the thesis will investigate the innovation of subcontractors across building the knowledge base that will form the absorptive capacity of the firm More specifically, the thesis examines the elements of quality management, education, and training activities will contribute to the absorptive capacity Based on the literature, the thesis will conduct other determinant factors that affected the innovation of the firm Next, a regression model will be built The influence of subcontracting activities on the innovation December 5, 2017 Secondly, the branches of state-owned bank support Small and medium-sized enterprises to approach financial sources and the local government assists experts to evaluate the innovation projects of Small and medium-sized enterprises In fact, Small and medium-sized enterprises are too hard to approach the loans due to lack of collateral The long-term loans thus are very important for Small and medium-sized enterprises to invest in innovation Besides, the local government proposes supporting programs to help Small and medium-sized enterprises enhance their perceptions of business and trade laws, training managing skills, giving legal, technological advice, and so on 5.2.2 Managing implication The entrepreneurs, who managing the subcontracting firms in this study, should plan a strategy to invest more in human capital and training activities to improve their employees’ skills and knowledge it, in turn, will build the absorptive capacity for the firm The innovative cognition of the staffs is also critical for firms Those are a premise to innovative activities that is the key for successful subcontractors The results suggest that entrepreneur should involve deeply and empowers more for middle-managers in the innovation process Participating in the industry forums and constructing the learning-sharing networks are the sources to create knowledge for narrowing the gap of technology and serving the innovation In addition, recognizing the information technology is seen as an inevitable trend of international economic integration make the motivation for the firm to change outdated working modes in order to take part in the global value chains 5.3 Limitations Although this study has achieved the insightful objetive of the nature of the manufacturing subcontractors in the Vietnamese Small and medium- 75 The influence of subcontracting activities on the innovation December 5, 2017 sized enterprises sector to contribute the literature There have much works to be done to understand deeply on this subject Firstly, the observations drawing from the SME dataset and omitting information of the respondents reduce the number of observations in the regression model Yet, the characteristics of these firms are relatively homogeneous comparing to the dataset Secondly, due to the number of observations and omitting information of the respondents, the thesis cannot evaluate the impact of subcontracting activities on each kind of innovation to give the subcontractor a more specific strategy for improving their competitive advantage Thirdly, since the dataset is not specifically designed for Vietnamese subcontractors, this study does not comprehend all aspects of Vietnamese enterprises It thus does not show completely the information of innovation operating and managing processes as well as cannot evaluate the innovation efficiencies 5.4 Future research Future research is needed to evaluate the impact of activities on each kind of innovations in order to consider which kind of innovation strongly affects the competitive advantage of the subcontractor 76 The influence of subcontracting activities on the innovation December 5, 2017 REFERENCES Abernathy, W J (1982) Competitive decline in U S innovation : the management factor Research management, 25(5), 34-41 Abraham, K G., & Taylor, S K (1993) Firms' use outside contractors: Theory and Evidence National Bureau of Economic Research Acemoglu, D., Aghion, P., Griffith, R., & Zilibotti, F (2004) Vertical integration and Technology: Theory and Evidence NBER working paper series Acs, Z J., & Audretsch, D B (1988) Innovation in Large and Small Firms: An Empirical Analysis American Economic Review, 678-690 ADB, A D (2014) Innovative ASIA Advancing the Knowledge-Based Economy Aghion, P., Bergeaud, A., Blundell, R., & Griffth, R (2017) Innovation, Firms and Wage Inequality Avermaete, T., Viaene, J., & Morgan, E J (2004) Determinant of product and process innovation in small food manufacturing firms Trends in Food Science & Technology, 15, 474–483 Basile, R (2001) Export behaviour of Italian manufacturing firms over the nineties: the role of innovation Research policy, 30, 1185–1201 Bayarỗelik, E B., Tael, F., & Apak, S (2014) A Research on Determining Innovation Factors for Small and medium-sized enterprises Procedia - Social and Behavioral Sciences, 202 – 211 Becker, S O., & Egger, P (2013) Endogenous product versus process innovation and process innovation and Empirical Economics, 329-354 Belenzon, S., & Patacconi, A (2008) Firm Size and Innovation: Evidence from European Panel Data Bhattacharya, M., & Bloch, H (2004) Determinants of innovation Small Business Economics, 155-162 Binh, T T., & Linh, N M (2011) Development of Automotive Industries in Vietnam with Improving the Network Capability ERIA Research Project Report, 273-307 Bocquet, R (2008) Organizing innovative activities relationships: empirical evidence from the Sillon Alpin 77 in subcontracting The influence of subcontracting activities on the innovation December 5, 2017 Bocquet, R (2011) Product and Process Innovations in Subcontracting Empirical Evidence from the French "Sillon Alpin" Industry and Innovation, 649-668 Bonanno, G., & B., H (2008) Intensity of competition and the choice between product and process innovation International Journal of Industrial Organization, 495-510 Bosma, N., & Wit, G d (2004) The influence of innovation on firm size Business & Policy Research (EIM) Bougrain, F., & Haudeville, B (2002) Innovation, collaboration and Small and medium-sized enterprises internal research capacities Research Policy, 735–747 Braga, H., & Willmore, L (1991) Technological imports and technological effort: an analysis of their determinants in Brazilian firms Journal of Industrial Economics, 421-432 Brouwer, E (1997) Into Innovation: Determinants and Indicators Utrecht: Drukkerij Elinkwijk Carlson, C R., & Wilmot, W W (2006) Cach tan (Innovation) (A Le, C Huynh, & L Nguyen, Trans.) Thoidai Cassiman, B., & Martinez-Ros, E (2003) Innovation Driving Export Performance: Evidence from Spanish Manufacturing Chandra, M., G Zarb, F., & P Neelankavil, J (n.d.) Product development and innovation for developing countries: Potential and challenges Journal of Management Development, 27(10), 1017 - 1025 Chen, L (2017) Globalisation and Trade Liberalisation in Supporting GVCs Upgrade: The Case of the Republic of Korea ERIA (Economic Research Institute of ASEAN and East Asia) Chen, Y., & Démurger, S (2002) Foreign Direct Investment and Manufacturing Productivity in China Clark, K B., & Fujimoto, T (1991) Product Development Performance Massachusett: Harvard Business Press Coase, R H (1937) The Nature of the Firm Economica, 386-405 Cohen, W M., & Levinthal, D A (1990) Absorptive Capacity: A New Perspective on Learning and Innovation Administrative Science Quarterly, 35, 128-152 Cohendet, P., & Llerena, P (2005) A Dual Theory of the Firm Between Transactions and Competences : Conceptual Analysis and Empirical Considerations Revue d économie industrielle , 110(1):175-198 78 The influence of subcontracting activities on the innovation December 5, 2017 Cooper, R., & Kleinschmidt, E (1995) Benchmarking the firm’s critical success factors in new product development Journal of Product Innovation Management, 374 –391 Crepon, B., Duguet, E., & Mairesse, J (1998) Research, Innovation, and Productivity: An Econometric Analysis at the Firm Level Economics of Innovation and New Technology, 115-158 Dosi, G., Freeman, C., Nelson, R., Silverberg, G., & Soete, L (1988) Technical Change and Economic Theory Pisa: Sant'Anna School of Advanced Studies Drucker, P (2002) The discipline of innovation Harvard Business Review, 95-100 Dyer, J H., & Nobeoka, K (2000) Creating and Managing a High-Performance Knowledge-Sharing Network: The Toyota Case Strategic Management Journal, 21, 345-367 EIM (2004) The influence of innovation on firm size Business and Policy Research EIM (2009) EU Small and medium-sized enterprises and subcontracting The Neitherlands: EIM Business & Policy Research Fontes, M., & Coombs, R (1996) New technology-based firm formation in a less advanced country: a learning process International Journal of Entrepreneurial Behaviour & Research, 82 - 101 Freel, M (2000) External linkages and product innovation in small manufacturing firms Entrepreneurship & Regional Development, 12(3), 245-266 Fritz, W (1989) Determinants of Product Innovation Activities European Journal of Marketing, 23(10), 32 - 43 Galende, J., & Fuente, J M (2003) Internal factors determining a firm’s innovative behaviour Research Policy, 715–736 Ghazal, R., & Zulkhibri, M (2015) Determinants of innovation outputs in developing countries:Evidence from panel data negative binomial approach Journal of Economic Studies, 42, 237-260 Girma, S., & Görg, H (2002) Outsourcing, foreign ownership and productivity: Evidence from UK establishment level data Global and Economic Policy Griffith, R., Huergo, E., Mairesse, J., & Peters, B (2006) Innovation and productivity across four European countries Oxford Review of Economic Policy, 22(4): 483–498 79 The influence of subcontracting activities on the innovation December 5, 2017 Grunert, K G., Hartvig Larsen, H L., Madsen, T K., & Baadsgaard (1996) Market orientation in food and agriculture Boston: Kluwer Academic Gujarati, D (2011) Econometrics by example Palgrave Macmillan Hadjimanolis, A (2000, 7) An investigation of innovation antecedents in small firms in the context of a small developing country R&D Management, 30(3), 235246 Harris, R., & Moffat, J (2011) R&D, Innovation and Exporting Harrison, R., & Hart, M (1987) Innovation and market development: the experience of small firms in a peripheral economy OMEGA International Journal of Management Science, 445-454 Harvie, C., Narjoko, D., & Oum, S (2010) Firm charasteristic determinants of SME participation in production networks Economic Research Institute for Asian and East Asian Higón, D A., & Driffield, N (2011) Exporting and innovation performance: Analysis of the annual Small Business Survey in the UK International Small Business Journal, 4-24 Hirsch, S., & Bijaoui, I (1985) R&D intensity and Export Performance: A Micro View Weltwirtschaftliches Archiv, 238-251 Hoang, T V., & Pham, H T (2010) Productivity Spillovers from Foreign Direct Investment: The Case of Vietnam Huiban, J P., & Bouhsina, Z (1998) Innovation and the quality of labor factor: An empirical investigation in the French food industry Small Business Economics, 389-400 Hyvarinen, L (1990) Innovativeness and its Indicators in Small- and Mediumsized Industrial Enterprises International Small Business Journal, 64-79 Jensen, M., & Meckling, W (1976) Theory of the Firm: Managerial Behavior,Agency Costs and Ownership Structure Journal of Financial Economics, 305-360 Jong, J P (2006) Determinants of Product Innovation in Small Firms: A Comparison Across Industry International Small Business Journal, 24(6), 587-609 Kamien, M I., & Schwartz, N L (1975) Market Structure and Innovation: A Survey Journal of Economic Literature, 1-37 Kamien, M I., & Schwartz, N L (1982) Market Structure and Innovation Cambridge: Cambridge University Press 80 The influence of subcontracting activities on the innovation December 5, 2017 Kamp, M E., & May, E (1981) Kleine und mittlere Unternehmen im Forschungsund Entwicklungsprozeß ZfB, 347-368 Kendall, J (2012) Local financial development and growth Journal of Banking and Finance 36, 1548-1562 Kim, Y., Kwangsun, S., & Jinjoo, L (1993) Determinants of technological innovation in the small firms of Korea R&D Management, 23(3), 215-226 Kimura, F (2001) Subcontracting and the Performance of Small and Medium Firms in Japan King, N., & West, M A (1990) Experiences of Innovation at Work Journal of Managerial Psychology, 6-10 Kleysen, R F., & Street, C T (2001) Toward a multi‐dimensional measure of individual innovative behavior Journal of Intellectual Capital, 284 - 296 Kogut, B., & Zander, U (1992) Knowledge of the Firm, Combinative Capabilities, and the Replication of Technology Organization Science, 383 - 397 Kraft, K (1990) Are product and Process Innovations Independent of Each Other? Applied Economics, 22(8), 1029-1038 Krugman, P (1979) A Model of Innovation, Technology Transfer, and the World Distribution of Income Journal of Political Economy, 87, 2, 253-266 Kumar, R S., & Subrahmanya, M H (2011) Subcontracting Relationship of Indian Small and medium-sized enterprises with a Global TNC: Do Small and medium-sized enterprises Gain? How? Lachenmaie, S., & Wưßmann, L (2006) Does Innovation Cause Exports? Evidence from Exogenous Innovation Impulses and Obstacles Using German Micro Data Oxford Economic Papers, 58, 2, 317-350 Lahtinen, U (2001) Changing subcontracting - A study on the evolution of supply chains and subcontractors Oulu University, Available on the internet at: http://jultika.oulu.fi/files/isbn9514265459.pdf Landau, D (1983) Government expenditure and ecnomic growth : a cross country study Southern Economic Journal., 783-793 Lehtinen, U (1999) Subcontractors in a partnership environment: A study on changing manufacturing strategy Production Economics , 165-170 Leonidou, L C., & Katsikeas, C S (1996) The export development process: an integrated review of empirical model Journal of International Business Studies , 517 of 517-551 81 The influence of subcontracting activities on the innovation December 5, 2017 Levin, D Z (2002) When Do Organizational Routines Work Well? A New Approach to Knowledge Management Li, C.-Y., & Hsieh, C.-T (2009) The impact of knowledge stickiness on knowledge transfer implementation, internalization, and satisfaction for multinational corporations International Journal of Information Management, 425–435 Lindsay, P H., & Norman, D A (1997) Human Information Processing: An Introduction to Psychology New York: Academic Press Lipparini, A (1994) The glue and the pieces: Entrepreneurship and innovation in small-firm networks Journal of Business Venturing, 9(2), 125–140 Lunn, J., & Martin, S (1986) Market structure, firm structure and research and development Quarterly Review of Economics and, 31-44 Lybaert, N (1998) The information use in a SME: its importance and some elements of influence Small Business Economics, 171–191 M Banbury, C., & Mitchell, W (1995) The effect of introducing important incremental innovations on market share and business survival Strategic Management Journal, 161-182 M Kabir Hassana, B S.-S (2011) Financial development and economic growth: New evidence from panel data The Quarterly Review of economics and Finance, 88-104 Mansfield, E (1981) Composition of R and D Expenditures: Relationship to Size of Firm, Concentration, and Innovative Output The Review of Economics and Statistics, 63(4), 610-615 Marcin, K (2007) How does FDI inflow affect productivity of domestic firms? The role of horizontal and vertical spillovers, absorptive capacity and competition The Journal of International Trade & Economic Development, 155-173 Martinez-Ros, E (2000) Explaining the decisions to carry out product and process innovations: The spanish case The Journal of High Technology Management Research, 223-242 Martins, P S., & Yang, Y (2009) The impact of exporting on firm productivity: a meta-analysis of the learning-by-exporting hypothesis Springer, 145:431–445 Mascitelli, R (2000) From Experience: Harnessing Tacit Knowledge to Achieve Breakthrough Innovation Journal of Product Innovation Management, 179-193 Meeus, M., Oerlemans, L., & Hage, J (1999) Sectoral patterns of interactive learning, an empirical exploration using an extended resource based model The Netherland: Eindhoven center for innovation studys 82 The influence of subcontracting activities on the innovation December 5, 2017 Meisel, J., & Lin, S (1983) The impact of market structure on the firm’s allocation of resources to research and development Quarterly Review of Economics and Business, 28-43 Meyer-Krahmer, F (1984) Recent results in measuring innovation output Research Policy, 175–182 Micheal, P (1986) Competition in global industry Boston: Harvard Business School Press Narula, R., & Wakelin, K (1998) Technological competitiveness, trade and foreign direct investment Structural Change and Economic Dynamics , 9,373–387 Nelson, R., & Winter, S (1982) An Evolutionary Theory of Economic Change Massachusetts: Harvard University Press Nobeoka, K., Dyer, J H., & Madhok, A (2002) The Influence of Customer Scope on Supplier Learning and Performance in the Japanese Automobile Industry Journal of International Business Studies, 717-736 Nonaka, I., & Takeuchi, H (1995) The knowledge-creating company: How Japanese copmanies create the dynmics of innovation New York/Oxford: Oxford Univesity Nonaka, I., Toyama, R., & Hirata, T (2008) Managing Flow: A Process Theory of the Knowledge-Based Firm PALGRAVE MACMILLAN UK OECD (1982) Innovation in Small and Medium Firms Paris: OECD OECD (1996) THE KNOWLEDGE-BASED ECONOMY OECD&Eurostat (2005) Oslo Manual: Guidelines for Collecting and Interpreting Innovation Data, 3rd Edition Paris: OECD Publishing Oerlemans, L., Meeus, M., & Boekema (1998) Do Networks Matter for Innovation? The usefulness of the economic network approach in analysing innovation Tijdschrift voor economische en sociale geografie, 298-309 Palangkaraya, A (2012) The Link between Innovation and Export:Evidence from Australia’s Small and Medium Enterprises Economic Research Institute of ASEAN and East Asia Pavitt K., R T (1987) The Size Distribution of Innovating Firms in the UK: 19451983 The Journal of Industrial Economics, 297-316 Pla-Baber, J., & Alegre, J (2007) Analysing the link between export intensity,innovation and firm size in a science-based industry International Business Review, 275-293 83 The influence of subcontracting activities on the innovation December 5, 2017 Quintane, E., Casselman, R M., Reiche, B S., & Nylund, P (2011) Innovation as a knowledge‐based outcome Journal of Knowledge Management Rogers, E M., & Floyd, S F (1971) Communication of Innovations: A CrossCultural Approach New York: The Free Press Rogers, M (2004) Networks, Firm Size, and Innovation Small Business Economics , 141–153 Romijn, H., & Albaladejo, M (2002) Determinants of innovation capability in small electronics and software firms in southeast England Research Policy, 1053– 1067 Roper, S., & Love, J H (2002) Innovation and export performance: evidence from the UK and German manufacturing plants research policy, 31, 1087–1102 Rothwell, R., & Dodgson, M (191) External linkages and innovation in smal l and medium-sized enterprises R& D M anagement, 125-137 Scherer, F (1992) Schumpeter and Plausible Capitalism, Journal of Economic Literature Journal of Economic Literature, 1416-1433 Scholz, L (1988) From the nnovation survey to the innovation flow matrix A new approach to measure technical progess and impact on growth and employment The group of national experts on science and technology indicator Paris Schumpeter, J (1942) Capitalism, Socialism and Democracy New York: Harper & Row Smith, V., Madsen, E S., & Dilling-Hansen, M (2002) Do R&D investments affect export performance? Stewart, K B., & Mitchell, P (2003) What separates the winners from the losers in new food product development? Trends in Food Science and Technology, 58-64 Symeonidis, G (1996) Innovation, firm size, market structure: Schumpeterian Hypotheses and some new themes Paris: London School of Economics Teece, D (1986) Profiting from technological innovation: Implications for integration, collaboration, licensing and public policy Research Policy, 15, 6, 285– 305 Teece, D J (1994) Firm organization, industrial structure, and technological innovation Journal of Economic Behavior & Organization, 193-224 Thangavelu, S M (2016) Globalization and Performance of Small and Large Firm: Case of Vietnamese Firms ERIA Research Project Report 84 The influence of subcontracting activities on the innovation December 5, 2017 Tidd, J., & Bessant, J (2009) Managing Innovation: Integrating technological, market and organizational change Chichester,: John Wiley Twiss, B (1992) Managing Technological Innovation London: Pitman Publishing Umidjon, A., Shuhua, H., Jayathilake, B., & Renyan, M (2014) Characteristics of Small and Medium Enterprise Innovativeness: Cases of Uzbekistan and China International Journal of Management Science and Business Administration, 12-27 Urban, G L., & Hauser, J R (1980) Design and Marketing of New Products Cambridge: Prentice-Hall Vega-Jurado, J., Gutierrez-Gracia, A., Fernandez-de-Lucio, I., & es-Henr´ıquez, L M (2008) The effect of external and internal factors on firms'product innovation Research Policy, 616-632 Vermeulena, P A., De Jongb, J P., & O'shaughnessyc, K (2005) Identifying key determinants for new product introductions and firm performance in small service firms The Service Industries Journal, 25(5), 625-640 Wakelin, K (1998) Innovation and export behaviour at the firm level Research Policy, 829–841 Wakelin, M B (2002) Efiiciency, innovation and exports Oxford bullentin if economics and atatistics Walsh, V (1984) Invention and innovation in the chemical industry: Demand-pull or discovery-push? Research Policy, 211-234 Weiß, P (2003) Adoption of Product and Process Innovations in Differentiated Markets: The Impact of Competition Review of Industrial Organization, 301–314 Wernerfelt, B (1984) A resource-based view of the firm Strategic Management Journal, 171-184 White, M., Braczyk, H., Ghobadian, A., & Niebuhr, J (1988) Small Firms' Innovation: Why Regions Differ London: Policy Studies Institute Whitley, R (2000) The Institutional Structuring of Innovation Strategies: Business Systems, Firm Types and Patterns of Technical Change in Different Market Economies Organization Studies, 855-886 Williamson, O E (1989) Handbook of lndustrial Organization Published by Elsevier B.V Wong, S K.-S (2014) Impacts of environmental turbulence on entrepreneurial orientation and new product success European Journal of Innovation Management, 17(2), 229-249 85 The influence of subcontracting activities on the innovation December 5, 2017 Yang, C.-H., & Chen, Y.-H (2012) R&D, productivity, and exports: Plant-level evidence from Indonesia Economic Modelling, 208-216 Yoshihara, K -i (1976) Limiting behavior of U-statistics for stationary, absolutely regular processes Zeitschrift für Wahrscheinlichkeitstheorie und Verwandte Gebiete , 237-252 Zachariadis, M (2003) R&D, innovation, and technological progress: a test of the Schumpeterian framework without scale effects Canadian Juornal Economic, 36, 566-586 86 The influence of subcontracting activities on the innovation APPENDIX 87 December 5, 2017 The influence of subcontracting activities on the innovation December 5, 2017 APPENDIX A – MARGINAL EFFECT margins, dydx(*) Average marginal effects Model VCE : OIM Number of obs = 72 Expression : Pr(INNO), predict() dy/dx w.r.t : SUB_CONTRACTS SUB_REVENUE SUB_FOREIGN QUAL_INT SKILLED TRAINING ENTREPR_EDU FIRM_SIZE INVEST_EQ SALES MEANWAGE MEANWAGE_SQ ASSET_LOCA ASSIST_SAME ASSIST_BANK ASSIST_LGOV METAL WOOD dy/dx SUB_CONTRACTS SUB_REVENUE SUB_FOREIGN QUAL_INT SKILLED TRAINING ENTREPR_EDU FIRM_SIZE INVEST_EQ SALES MEANWAGE MEANWAGE_SQ ASSET_LOCA ASSIST_SAME ASSIST_BANK ASSIST_LGOV METAL WOOD -.0233119 -.0004516 0418087 -1.567256 1.516455 4987541 -.5147969 0374346 0000282 -2.93e-08 0003226 -4.89e-08 0042511 0032496 -.0024279 0423955 2555274 0499622 Delta-method Std Err .008903 000095 0144743 3415706 735463 215984 1255943 0059588 0000921 9.42e-09 0000907 1.21e-08 0023638 0011465 0088226 014256 1097396 1286057 z -2.62 -4.75 2.89 -4.59 2.06 2.31 -4.10 6.28 0.31 -3.11 3.56 -4.03 1.80 2.83 -0.28 2.97 2.33 0.39 P>|z| 0.009 0.000 0.004 0.000 0.039 0.021 0.000 0.000 0.759 0.002 0.000 0.000 0.072 0.005 0.783 0.003 0.020 0.698 [95% Conf Interval] -.0407613 -.0006379 0134397 -2.236722 0749739 0754332 -.7609572 0257557 -.0001522 -4.77e-08 0001449 -7.27e-08 -.0003819 0010026 -.01972 0144542 0404418 -.2021003 88 -.0058624 -.0002654 0701777 -.8977903 2.957936 922075 -.2686366 0491136 0002086 -1.08e-08 0005003 -2.51e-08 0088842 0054966 0148641 0703369 470613 3020248 The influence of subcontracting activities on the innovation December 5, 2017 APPENDIX B – CORELATION OF EXPLANATORY VARIABLES corr SUB_CONTRACTS SUB_REVENUE SUB_FOREIGN QUAL_INT SKILLED TRAINING ENTREPR_EDU FIRM_SIZE INVEST_EQ SALES MEANWAGE if > subtor==1& SUB_CONTRACTS>0 (obs=153) SUB_CO~S SUB_RE~E SUB_FO~N QUAL_INT SUB_CONTRA~S SUB_REVENUE SUB_FOREIGN QUAL_INT SKILLED TRAINING ENTREPR_EDU FIRM_SIZE INVEST_EQ SALES MEANWAGE 1.0000 0.0379 0.2473 0.0324 -0.0564 -0.0200 -0.0900 -0.0019 -0.0405 -0.0020 -0.0319 1.0000 -0.0055 0.2857 0.0551 0.2786 0.1874 0.7021 0.1287 0.3788 0.0628 1.0000 0.0708 0.0185 -0.0412 0.0084 0.0155 -0.0524 0.0104 0.0627 1.0000 0.3951 0.3470 0.2390 0.4580 0.3960 0.5235 0.0999 SKILLED TRAINING ENTREP~U FIRM_S~E INVEST~Q 1.0000 0.0932 0.3414 0.1424 0.2405 0.2450 0.1214 1.0000 0.0431 0.2603 0.1569 0.2171 0.1143 89 1.0000 0.3893 0.2564 0.3367 0.1274 1.0000 0.3495 0.7546 0.1041 1.0000 0.6325 0.1954 SALES MEANWAGE 1.0000 0.2162 1.0000 ... rate of innovation of subcontractors 49 Table The rate of innovation of subcontractors of foreign-invest enterprises of the sample 49 Table Statistic of number of innovators of. .. activities on innovation decision of the subcontractor in manufacturing sector of Vietnamese small and medium-sized enterprises The data used for this thesis extracted from the rich dataset of Vietnamese. .. Small and Medium-Sized Enterprise (SME) sector The study approached two main theories of transaction cost (TCE) and knowledge-based theory The data was drawn from the rich data set of Vietnamese SMEs