Giới thiệu máy JJS

CONFIDENTIAL 2009 HITACHI Washing Machine 2009 BWW Series USP Intelligent Spin High-performance Beat Wave Wash, now featuring newly developed spin control system – Intelligent Spin Various Spin-Dry setting for any laundry from the blanket to the very delicate clothes Air Jet Dry: Dries fast and clothes ready to wear Tangle Free Spin: Finish with less wrinkles and easy to unload Delicate Spin: Gentle spin-dry for delicate clothes Variable Spin Control For gentle drying, For fluffy finish Keeps clothes’ shape For thorough drying Beat Wave Wash New Deep Penetration Wash Makes concentrated detergent liquid that penetrates deep into clothes to wash out dirt New Active Beat Lifter Improved pulsator washes more elaborately and efficiently Beat Shower USP Grade H Series and J Series 2008: H Series Inverter 2009: J Series Non-Inverter Detergent Super Clean Maximizer Wash BWW INV Pulsator Shower Type Washing Type Beat Wing Triple Beat Shower Super Clean Wash Inverter Beat Lifter Beat Shower Intelligent Spin Super Clean Wash Pulsator Shower Type Active Beat Wing Triple Beat Shower Non-IS Washing Type New DWP Active Beat Lifter BWW Non-IS Non-Inverter BWW INV Detergent Maximizer BWW DM BWW SCW Intelligent Spin Beat Shower Tangle Free Spin Condition: -Load: 3kg (Mixed clothes) -Spin: Intelligent Spin - Intelligent Spin Control Panel Design ●New display using 7-segmented digits (Blue Color) ●Applying Pictorial symbol Change to Blue Color 7-segmented indications （Spin Speed and other Indication） 600 rpm 400 rpm (Spin Speed) (Spin Speed) Air Jet Intelligent Spin Power Off (Switch Off) Intelligent Spin Display - Blue digits Active Beat Lifter - Improved pulsator washes more elaborately and efficiently Color :Not Final Active Beat Lifter - Enhanced beating action -Enlarged area and stroke of Active Beat Lifter creates powerful beating action to clothes Active Beat Lifter spec: Beat Lifter spec: -Area: 2,950mm2 -Stroke: 3mm -Spring type: Plastic leaf -Area: 5,000mm2 →70% UP! -Stroke: 5mm →66% UP! -Spring type: SUS coil Creates powerful beating action to clothes Abolish Piston in center Current Active Beat Lifter 10 Basket difference 14 Basket Assembly 670 (16.0kg.) Current Model :670-H (16.0kg.) ■Basket Assembly (670-H) ■Detergent tray 670 ■Shower Inlet ■Filter Case (670) ■Jet Filter (610E) NEW Model :670-J (16.0kg.) ■Basket Assembly (670-J) ■Shower Inlet ■Shower case (670) ■Filter (610E) ■Detergent tray 670 ■ Filter net (610) ■Shower Inlet ■Filter Case (590) ■Shower Inlet ■New Shower case 610J CONFIDENTIAL 07A ASIA Meeting Washing Machine 13-14/Jun/2007＠ＨＣＰＴ Line up （2007-2008） 2006 2007 2008 ■Detergent Maximizer SF-150GJX SF-120GJX SF-110GJX SF-100GJX OCT FEB FEB NEW□590 SF-150KJX SF-120HJX SF-110HJX MAY SF-100HJX NEW□590 SF-80KJX ■Super Clean Wash OCT SF-140GJ SF-140KJ FEB SF-120HJ SF-120GJ DEC NEW□590 SF-100GJ SF-100HJ NEW□590 DEC SF-90HJ SF-95GJ OCT SF-80HJ/H NEW□590 SF-80GJ SF-70GJ Development Outline 2007 New Model SF80GJ 560□ （8.0kg） SF95GJ SF100GJ 570□ （9.5-10kg） SF100GJX 570□ （10kg・DM) New 8-10kg Model for ’07/B～ New Unified Design 8.0kg Current 8.0kg Tub （448φ） 9.0kg Current 9.0kg Tub （483φ） DM will be continued ■Change to New Cabinet in May/08 10.0kg Current 10.0kg Tub （483φ） Product Concept Pursue Basic Performance of WM Spin ＋ Ability Wash Ability available Clean Usability New Round Form Design Feature Develop Global Fighting （Auto） HITACHI Unique Feature High Value Added High Value ＋ Added D Maximizer Air Jet etergent available 10kg Available NEW ・Jet Cascade Flow （9-10kg Available） ・Newly Design Jet Pulsator NEW Round Form & Feminine Design ・Nano Titanium ・Antibacterial Lint Filter ・Tub Clean Feature Feature Adopt HITACHI Unique & Visible Features Wash Detergent Maximizer Wash Super Clean Wash Dry Air Jet Dry Clean 9.0kg 10.0kg Nano Titanium Wash Jet Cascade Flow Wash New Jet Pulsator Clean Anti-Bacterial Jet Filter (Lint Filter） Clean Tub Clean Mode Usability Auto Restart UsabilityChild Usability 8.0kg Lock System Drain Pump Hot Water Inlet （１） （２） （２） Thank You Wash cycle and an error check method Service switches  Simultaneously push the two buttons to select the service operations described in the following table  After the buttons are simultaneously pushed, a “beep” should sound approximately seconds later indicating successful activation of this function No Item Initial water level sensor LED full display Error indication Model indicate Operation button Wash + Water Level Spin Rinse + + Operation Program After push button both is on for 0.5 second, the machine will auto cut off switch + Every LED is illuminated Delay Program Power When these buttons are pressed, the most recent error number is indicated (See the table for details.) The segment is show “80” Wash cycle and the error check method Press Power ON/ OFF button (ON) button First time Second time Press wash + Power NO/OFF button Total of wash cycle It is total of the wash cycle when the point is illuminated First time Second time Press Delay start button number of the error Course code Press Program button The recent error check It is the recent error when the point is illuminated Wash cycle and the error check method (Cont.) Press Delay Start button The most error check from recent to first error It is the recent error when the point is illuminated Press Delay Start button Press Delay Start button Do not error Press Power NO/OFF (OFF) Formula for calculate the wash cycle and error Wash Cycle = [ n 163] + [ n 162] + [ n 161] + [ n 160] Calculation First time Show :2 sec Calculation [n.163] [n.160] + [ Not show : n.162] Second time Show :2 sec + + [ n.161] + 4696 256 16 10 1280 144 10 = 1434 Hexadenary 0=0 4=4 8=8 12 = C 1=1 5=5 9=9 13 = D 2=2 6=6 10 = A 14 = E 3=3 7=7 11 = B 15 = F Cài đặt Huỷ cài đặt Demo Mode Demo Mode lập trình sẵn cho tất model máy JJS CÀI ĐẶT DEMO MODE KHI SẢN PHẨM TRƯNG BÀY TẠI CỬA HÀNG Công suất tiêu thụ cho demo mode: Thấp 5W/ ① Nhấn đồng thời ‘SPIN’ ‘POWER’ khoảng giây ② Demo mode vận hành → Tính Demo mode lưu vào nhớ tự động vận hành mở máy Trong demo mode Đèn LED hiển thị tốc độ vắt thay đổi lên xuống từ 150 đến 800v/p Khi bấm phím sau đèn hiển thị thay đổi: SPIN CONTROL – Tốc độ thay đổi lên xuống hiển thị ‘ON’ & ‘OFF’ START/PAUSE – Hiển thị ‘SPN’ giây HUỶ CÀI ĐẶT DEMO MODE ③ Nhấn đồng thời ‘SPIN’ ‘POWER’ khoảng giây ④ Demo mode huỷ Preparation for ‘Tangle Free Finish’ Demonstration For setting up: ① W/M stand to secure enough height for drainage (Its height must be higher than a ③tub to drain water) ② Bucket or tank to put water for washing (*1) ③ Tub to drain water after washing (or a babies’ plastic pool would be most suitable) ④ Extension cord for power supply (*1: Max 90L is required for 12kg W/M) ② ③ For demonstration: ① ** Product Photo is not JJS series ⑤ Magnet (small) for release from lid lock ⑥ Clothes T-Shirt x Bath Towel x Face Towel x Shirt (Long Sleeve) x Underpants x ==================== Total Load: 3.5kg – 4.0kg ④ ... = E 3=3 7=7 11 = B 15 = F Cài đặt Huỷ cài đặt Demo Mode Demo Mode lập trình sẵn cho tất model máy JJS CÀI ĐẶT DEMO MODE KHI SẢN PHẨM TRƯNG BÀY TẠI CỬA HÀNG Công suất tiêu thụ cho demo mode: Thấp... ‘SPIN’ ‘POWER’ khoảng giây ② Demo mode vận hành → Tính Demo mode lưu vào nhớ tự động vận hành mở máy Trong demo mode Đèn LED hiển thị tốc độ vắt thay đổi lên xuống từ 150 đến 800v/p Khi bấm phím... supply (*1: Max 90L is required for 12kg W/M) ② ③ For demonstration: ① ** Product Photo is not JJS series ⑤ Magnet (small) for release from lid lock ⑥ Clothes T-Shirt x Bath Towel x Face Towel