Thông tin tài liệu
SAFE Rein forced concrete design manual The computer program SAFE® and all associated documentation are proprietary and copyrighted products. Worldwide rights of ownership rest with Computers & Structures, Inc. Unlicensed use of this program or reproduction of documentation in any form, without prior written authorization from Computers & Structures, Inc., is explicitly prohibited.
Ngày đăng: 30/04/2018, 19:30
Xem thêm:
Từ khóa liên quan
Mục lục
Title Page
Copyright
Disclaimer
Contents
Chapter 1 Introduction
Chapter 2 Design for ACI 318-08
2.1 Notations
2.2 Design Load Combinations
2.3 Limits on Material Strength
2.4 Strength Reduction Factors
2.5 Beam Design
2.5.1 Design Flexural Reinforcement
2.5.1.1 Determine Factored Moments
2.5.1.2 Determine Required Flexural Reinforcement
2.5.1.2.1 Design of Rectangular Beams
2.5.1.2.2 Design of Flanged Beams
2.5.1.2.2.1 Flanged Beam Under Negative Moment
2.5.1.2.2.2 Flanged Beam Under Positive Moment
2.5.1.2.3 Minimum and Maximum Reinforcement
2.5.2 Design Beam Shear Reinforcement
2.5.2.1 Determine Factored Shear Force
2.5.2.2 Determine Concrete Shear Capacity
2.5.2.3 Determine Required Shear Reinforcement
2.5.3 Design Beam Torsion Reinforcement
2.5.3.1 Determine Factored Torsion
2.5.3.2 Determine Special Section Properties
2.5.3.3 Determine Critical Torsion Capacity
Tài liệu cùng người dùng
Tài liệu liên quan
