;******************************************************************************* ; MSP430G2xx1 Demo - Reset on Invalid Address fetch, Toggle P1.0 ; ; Description: Toggle P1.0 by xor'ing P1.0 inside of a software loop that ; ends with TAR loaded with 3FFFh - op-code for "jmp $" This simulates a code ; error The MSP430F2xx will force a reset because it will not allow a fetch ; from within the address range of the peripheral memory, as is seen by ; return to the mainloop and LED flash ; In contrast, an MSP430F1xx device will "jmp $" stopping code execution with ; no LED flash ; ACLK = n/a, MCLK = SMCLK = default DCO ; ; MSP430G2xx1 ; ; /|\| XIN|; | | | ; |RST XOUT|; | | ; | P1.0| >LED ; ; D Dang ; Texas Instruments, Inc ; October 2010 ; Built with IAR Embedded Workbench Version: 5.10 ;******************************************************************************* #include "msp430g2231.h" ; ORG 0F800h ; Program Reset ; RESET mov.w #0280h,SP ; Initialize stackpointer StopWDT mov.w #WDTPW+WDTHOLD,&WDTCTL ; Stop WDT SetupP1 bis.b #001h,&P1DIR ; P1.0 output mov.w #03FFFh,&TAR ; "jmp $" ; Mainloop xor.b #001h,&P1OUT ; Toggle P1.0 Wait mov.w #050000,R15 ; Delay to R15 L1 dec.w R15 ; Decrement R15 jnz L1 ; Delay over? mov #0170h,PC ; Invalid fetch jmp Mainloop ; Again ; ; ; Interrupt Vectors Used MSP430 ; ORG 0FFFEh ; MSP430 RESET Vector DW RESET ; END