;******************************************************************************* ; MSP430G2x11 Demo - Comp_A, Output Reference Voltages on P1.1 ; ; Description: Output comparator_A reference levels on P1.1 Program will ; cycle through the on-chip comparator_A reference voltages with output on ; P1.1 Normal mode is LPM0 with TA0 triggering interrupt for next mode ; ACLK = n/a, MCLK = SMCLK = default DCO ; ; MSP430G2x11 ; ; /|\| XIN|; | | | ; |RST XOUT|; | | ; | CA1/P1.1| >Vref ; | | ; ; D Dang ; Texas Instruments Inc ; October 2010 ; Built with IAR Embedded Workbench Version: 5.10 ;******************************************************************************* #include "msp430g2211.h" ; ORG 0F800h ; Program Reset ; RESET mov.w #0280h,SP ; Initialize stackpointer StopWDT mov.w #WDTPW+WDTHOLD,&WDTCTL ; Stop WDT mov.b #P2CA4,&CACTL2 ; CA1 SetupC0 mov.w #CCIE,&CCTL0 ; CCR0 interrupt enabled SetupTA mov.w #TASSEL_2+ID_3+MC_2,&TACTL ; SMCLK/8, contmode eint ; General enable interrupts ; Mainloop clr.b &CACTL1 ; No reference voltage bis.w #CPUOFF,SR ; CPU off Ref1 mov.b #CAREF0+CAON,&CACTL1 ; 0.25*Vcc, Comp on bis.w #CPUOFF,SR ; CPU off Ref2 mov.b #CAREF1+CAON,&CACTL1 ; 0.5*Vcc, Comp on bis.w #CPUOFF,SR ; CPU off Ref3 mov.b #CAREF1+CAREF0+CAON,&CACTL1 ; 0.55V on P2.3, Comp on bis.w #CPUOFF,SR ; CPU off jmp Mainloop ; ; TA0_ISR; Exit LPM0 ; bic.w #CPUOFF,0(SP) ; Exit LPM0 on RETI reti ; ; ; ; Interrupt Vectors ; ORG 0FFFEh ; MSP430 RESET Vector DW RESET ; ORG 0FFF2h ; Timer_A0 Vector DW TA0_ISR ; END