1. Trang chủ
  2. » Giáo án - Bài giảng

Corrosion control in the oil and gas industry

996 175 0

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 996
Dung lượng 39,06 MB

Nội dung

The annual cost of corrosion in the USA oil and gas industry is over 27 billion; leading some toestimate the global annual corrosion cost of the oil and gas industry as exceeding 60 billion. Forcompanies with oil or gas infrastructure, the need to reduce corrosionrelated costs is pressing. Further,public awareness and regulatory scrutiny of the environmental impact of releases of oil and gas haveenormously increased in recent years.

Ngày đăng: 17/10/2017, 13:40

Nguồn tham khảo

Tài liệu tham khảo Loại Chi tiết
1. Papavinasam S, Doiron A, Wu E, Revie RW. Determination of inhibitory and corrosive properties of condensates. Gas Research Institute (GRI)/Pipeline Research Council International (PRCI), GRI January 2005. 8705 Khác
2. J. Collier and S. Papavinasam, ‘Establishing a state-of-the-art corrosion laboratory: a journey towards ISO/IEC 17025’, NACE Northern Area Eastern Conference, Ottawa, Ontario, Canada, Oct. 15–18, 2011 Khác
3. Skoog DA, West DM, Holler FJ. Fundamentals of analytical chemistry. Adopted from Figure 1.1.Thomson Learning Academic Resource Center 1996:3. ISBN: 0-03-005938-0 Khác
4. Skoog DA, West DM, Holler FJ. Fundamentals of analytical chemistry. Adopted from Figure 2.2. Thomson Learning Academic Resource Center 1996:14. ISBN: 0-03–005938-0 Khác
5. Skoog DA, West DM, Holler FJ. Fundamentals of analytical chemistry. Adopted from Figure 3.1. Thomson Learning Academic Resource Center 1996:22. ISBN: 0-03-005938-0 Khác
6. Skoog DA, West DM, Holler FJ. Fundamentals of analytical chemistry. Adopted from Figure 3.4. Thomson Learning Academic Resource Center 1996:26. ISBN: 0-03-005938-0 Khác
7. Corrosion monitoring and control systems, Caproco (1987) Limited, ‘Applications and use of the caproco high pressure access system for corrosion and process monitoring control’ January 1998, 4615 Eleniak Road, Edmonton, Alberta, T6B 2N1 Khác
8. Smith HV. Chapter 12: Oil and gas separators. In: Petroleum Engineering Handbook. Society of Petroleum Engineers; 1987. ISBN: 1-55563-010-3 Khác
9. Dean SW. Velocity-accelerated corrosion testing and predictions – an overview. Materials Performance 1990;29(9):61 Khác
10. Gaverick L, editor. Corrosion in the petrochemical industry. Materials Park, OH: ASM International;1994 Khác
11. Gas Processors Suppliers Association (GPSA) Engineering Data Book, 13th Edition, ASIN: B000USKIKE, Publisher GPSA, 6526 E, 60th Street, Tulsa, OK, USA, 74145 Khác
12. Gutzeit J. Napthenic acid corrosion in oil refineries. Materials Performance 1977;16(10):47 Khác
13. White RA, Ehmke EF. Materials selection for refineries and associated facilities. Houston, TX: NACE;1991 Khác
14. Degremont SA. Water treatment handbook (translated from French into English by Language Consultants (France) Limited). New York, NY: Halsted Press; 1979 Khác
15. Drew principles of industrial water treatment. Boonton, NJ: Drew Industrial Div., Ashland Chemical Co;1995 Khác
16. The NALCO. Water Handbook. In: Kemmer FN, editor. 2nd ed. New York, NY: McGraw-Hill Book Co;1988 Khác
17. Ives DJG, Janz GJ. Reference electrodes – theory and practice. New York, NY: Academic Press; 1961.Reprinted by NACE with permission of Academic Press in 1996, Loc No. 60–16910 Khác
18. Salama MM. Performance of sand monitors. CORROSION/2000, Paper No. 00085. NACE International, Houston: TX, USA; 2000 Khác
19. Brown GK. Solids and sand monitoring – an overview. CORROSION/2000, Paper No. 00091. NACE In- ternational, Houston: TX, USA; 2000 Khác
20. Shirazi SA, McLaury BS, and Ali MM. ‘Sand monitor evaluation in multiphase flow’, CORROSION/2000, Paper No. 00084, NACE International, Houston, TX, USA (2000) Khác

TỪ KHÓA LIÊN QUAN