Basic Electrical Diagnosis 34-Electrical Systems FCS-13449-REF FCS-13449-REFiigk Student Guide ORDER NUMBER: FCS-13449-REF COURSE CODE: 34S14TO March, 2006 Ford Customer Service Division Technical Training IMPORTANT SAFETY NOTICE Appropriate service methods and proper repair procedures are essential for the safe, reliable operation of all motor vehicles, as well as the personal safety of the individual doing the work This manual provides general directions for accomplishing service and repair work with tested, effective techniques Following them will help assure reliability There are numerous variations in procedures, techniques, tools and parts for servicing vehicles, as well as in the skill of the individual doing the work This manual cannot possibly anticipate all such variations and provide advice or cautions as to each Accordingly, anyone who departs from instructions provided in this manual must first establish that he compromises neither his personal safety nor the vehicle integrity by his choice of methods, tools or parts As you read through the procedures, you will come across NOTES, CAUTIONS, and WARNINGS Each one is there for a specific purpose NOTES give you added information that will help you to complete a particular procedure CAUTIONS are given to prevent you from making an error that could damage the vehicle WARNINGS remind you to be especially careful in those areas where carelessness can cause personal injury The following list contains some general WARNINGS that you should follow when you work on a vehicle • • Always wear safety glasses for eye protection • • • To prevent serious burns, avoid contact with hot metal parts such as the radiator, exhaust manifold, tail pipe, catalytic converter and muffler Be sure that the ignition switch is always in the OFF position, unless otherwise required by the procedure • • Do not smoke while working on the vehicle Set the parking brake when working on the vehicle If you have an automatic transmission, set it in PARK unless instructed otherwise for a specific service operation If you have a manual transmission it should be in REVERSE (engine OFF) or NEUTRAL (engine ON) unless instructed otherwise for a specific service operation • Keep hands and other objects clear of the radiator fan blades Electric cooling fans can start to operate at any time by an increase in underhood temperatures, even though the ignition is in the OFF position Therefore, care should be taken to ensure that the electric cooling fan is completely disconnected when working under the hood Use safety stands whenever a procedure requires you to be under the vehicle • Operate the engine only in a well-ventilated area to avoid the danger of carbon monoxide • Keep yourself and your clothing away from moving parts when the engine is running, especially the fan and belts To avoid injury, always remove rings, watches, loose hanging jewelry, and loose clothing before beginning to work on a vehicle Tie long hair securely behind your head The recommendations and suggestions contained in this manual are made to assist the dealer in improving his dealership parts and/or service department operations These recommendations and suggestions not supersede or override the provisions of the Warranty and Policy Manual, and in any cases where there may be a conflict, the provisions of the Warranty and Policy Manual shall govern The descriptions, testing procedures, and specifications in this handbook were in effect at the time the handbook was approved for printing Ford Motor Company reserves the right to discontinue models at any time, or change specifications, design, or testing procedures without notice and without incurring obligation Any reference to brand names in this manual is intended merely as an example of the types of tools, lubricants, materials, etc recommended for use Equivalents, if available, may be used The right is reserved to make changes at any time without notice WARNING: Many brake linings contain asbestos fibers When working on brake components, avoid breathing the dust Breathing the asbestos dust can cause asbestosis and cancer Breathing asbestos dust is harmful to your health Dust and dirt present on car wheel brake and clutch assemblies may contain asbestos fibers that are hazardous to your health when made airborne by cleaning with compressed air or by dry brushing Wheel brake assemblies and clutch facings should be cleaned using a vacuum cleaner recommended for use with asbestos fibers Dust and dirt should be disposed of in a manner that prevents dust exposure, such as sealed bags The bag must be labeled per OSHA instructions and the trash hauler notified as to the contents of the bag If a vacuum bag suitable for asbestos is not available, cleaning should be done wet If dust generation is still possible, technicians should wear government approved toxic dust purifying respirators OSHA requires areas where asbestos dust generation is possible to be isolated and posted with warning signs Only technicians concerned with performing brake or clutch service should be present in the area Copyright © 2006 Ford Motor Company Produced and Coordinated by Technical Support Operations Ford Customer Service Division March, 2006 CUSTOMER EXPECTATIONS Customer Expectations: Service Make it convenient to have my vehicle serviced at your dealership The Service Advisor should demonstrate a genuine concern for my service needs Fix it right the first time Complete servicing my vehicle in a timely and professional manner Provide me with a clear and thorough explanation of the service performed Call me within a reasonable amount of time after my service visit to ensure that I'm completly satisfied Be responsive to questions or concerns I bring to your attention Expectation “Fix It Right The First Time, On Time.” Both service advisors and technicians are important players when it comes to Expectation #3 Why Customers tell us “Fixing It Right The First Time, On Time” is one of the reasons they would decide to return to a dealer to buy a vehicle and get their vehicles serviced Technician Training It is our goal to help the technician acquire all of the skills and knowledge necessary to “Fix It Right The First Time, On Time.” We refer to this as “competency.” Technician’s Role Acquire the skills and knowledge for competency in your specialty via: STST New Model – Web Based Training – Web Based Training – Instructor Led – Instructor Led The Benefits The successful implementation of expectations means: – Satisfied customers – Repeat vehicle sales – Repeat service sales – Recognition that Ford and Lincoln/Mercury technicians are “the Best in the Business” TABLE OF CONTENTS CONTENTS COURSE INTRODUCTION COURSE INTRODUCTION–1 General Course Information Introduction–2 Course Requirements Introduction–2 Course Objectives Introduction–2 Agenda Introduction–2 LESSON ONE 1–1 Prerequisite Review 1–1 Activity 1–7 Activity 1–12 Activity 1–15 Activity 1–23 Progress Review 1–29 Activity 1–33 Activity 1–37 Activity 1–39 Progress Review 1–45 Activity 1–49 Homework 1–51 LESSON TWO 2–1 Workstation 2–1 Workstation 2–11 Workstation 2–25 Workstation 2–39 Homework 2–45 LESSON THREE 3–1 Instructor-led Demonstration 3–1 Workstation 3–5 Workstation 3–11 Workstation 3–19 Workstation 3–31 Homework 3–43 LESSON FOUR 4–1 Instructor-led Demonstration 4–1 Workstation 4–3 Workstation 4–7 Workstation 4–11 Workstation 4–21 Basic Electrical Diagnosis March, 2006 Table of Contents -i TABLE OF CONTENTS LESSON FIVE 5–1 Workstation 5–1 Workstation 5–5 Workstation 5–9 Workstation 5–13 Rotunda Order Form Table of Contents -ii March, 2006 Basic Electrical Diagnosis COURSE INTRODUCTION COURSE INTRODUCTION Basic Electrical Diagnosis March, 2006 Introduction - COURSE INTRODUCTION GENERAL COURSE INFORMATION Course Description This is the first instructor-led course in the Electrical/Electronics Curriculum This course is designed to provide hands-on opportunities for technicians to learn and improve their skills using tools and equipment, and to apply knowledge learned in previous curriculum courses in actual diagnostic situations Each day, students will have at least four opportunities to practice selected tasks Before the end of the course, they will have had at least 16 opportunities to practice diagnostic and service skills The results of the students’ work are recorded on worksheets Course Requirements Each technician attending this course will be required to pass a combination of hands-on and written evaluations The evaluations will be administered on the afternoon of the fifth day Written Test The student must answer at least 80% (24 out of 30) of the questions correctly to pass the written post-test Hands-On Evaluation In order to pass the course, the student must demonstrate mastery of the skills covered at the evaluated hands-on exercise z The hands-on evaluation is a pass/fail type It will be conducted with exercises in diagnosing electrical systems Course Objectives Upon successful completion of this course, the students will be able to: z Use the SSCC (Symptom-to-System-to-Component-to-Cause) diagnostic process relating to electrical concerns z Use special tools and service equipment associated with electrical diagnosis and repair z Use all service publications in their available formats to obtain needed information for diagnosis z Perform diagnostic test procedures Agenda DAY ONE: Introductions, Prerequisite Review, Lesson Workstations DAY TWO: Lesson Workstation Reviews, Lesson Workstations DAY THREE: Lesson Workstation Reviews, Lesson Workstations DAY FOUR: Lesson Workstation Reviews, Lesson Workstations DAY FIVE: Lesson Workstation Reviews, Lesson Workstations , Final Review, Post-Test Introduction - March, 2006 Basic Electrical Diagnosis LESSON ONE - PRERQUISITE REVIEW PREREQUISITE REVIEW Basic Electrical Diagnosis March, 2006 1-1 LESSON ONE - PREREQUISITE REVIEW PREREQUISITE REVIEW Identify the elements of a circuit: B C E D A 12V F BED106-A/VF A B C D E F Give three examples of good conductive materials and three examples of good insulating materials: Conductors 1-2 Insulators March, 2006 Basic Electrical Diagnosis LESSON FIVE - WORKSTATION NOTES March, 2006 Basic Electrical Diagnosis LESSON FIVE - WORKSTATION WORKSTATION Basic Electrical Diagnosis March, 2006 5-9 LESSON FIVE - WORKSTATION WORKSTATION STARTING SYSTEM DIAGNOSIS DIRECTIONS: In this workstation you will diagnose a starting system concern using a workshop manual and a DMM Answer the following questions as a group What is the symptom? What system(s) may be at fault? What components or circuits could be the cause of the concern? Diagnose the concern and use the spaces below to record what actions/tests you performed and the result of each Test Step - 10 Results March, 2006 Basic Electrical Diagnosis LESSON FIVE - WORKSTATION What component is at fault? What is the cause of the concern? A High resistance B Open C Short to ground D Short to power What service actions would you take to resolve the concern? Workstation is complete Return it to its original condition Basic Electrical Diagnosis March, 2006 - 11 LESSON FIVE - WORKSTATION NOTES March, 2006 Basic Electrical Diagnosis LESSON FIVE - WORKSTATION WORKSTATION Basic Electrical Diagnosis March, 2006 - 13 LESSON FIVE - WORKSTATION WORKSTATION WIPER SYSTEM DIAGNOSIS DIRECTIONS: In this workstation you will diagnose an electrical concern in a wiper system using a DMM Wire the windshield wiper circuit, verify a concern and answer the following questions as a group What is the symptom? What system(s) may be at fault? - 14 March, 2006 Basic Electrical Diagnosis LESSON FIVE - WORKSTATION What components or circuits could be the cause of the concern? Diagnose the concern and use the spaces below to record what actions/tests you performed and the result of each Test Step Results What component is at fault? What is the cause of the concern? A High resistance B Open C Short to ground D Short to power What service actions would you take to resolve the concern? Disconnect all jumper wires and return the workstation to its original condition Basic Electrical Diagnosis March, 2006 - 15 LESSON FIVE - WORKSTATION NOTES March, 2006 Basic Electrical Diagnosis GLOSSARY ABS Anti-lock Brake System Advance Trac Ford stability assist system BOO Brake ON/OFF BPP Switch Brake Pedal Position Brake Pedal Reserve The distance between the bottom of the brake pedal and the floor Brake Pedal Free Play The distance that the brake pedal is applied before braking begins to occur CAN Controller Area Network DOT Department of Transportation DTC Diagnostic Trouble Code DTV Disc Thickness Variation EBD Electronic Brake Distribution EHCU Electronic Hydraulic Control Unit (ABS module that is co-located with HCU) HCU Hydraulic Control Uni Hydro-Boost Hydraulic brake boosting system IVD Interactive Vehicle Dynamics (another term for Advance Trac) KOEO Key On Engine Off KOER Key On Engine Running LED Light Emitting Diode LPA Low Pressure Accumulator MIL Malfunction Indicator Lamp Multiplexing A computer strategy that allows module-to-module communication during normal vehicle operation NGS New Generation STAR Tester OBD On-board Diagnostics PC/ED Powertrain Control/Emission Diagnosis PCM Powertrain Control Module PID Parameter Identification Protocol A computer language that allows communication between control modules PSI Pounds per Square Inch PWM Pulse Width Modulated RPM Revolutions Per Minute Brake System Diagnosis and Repair September, 2005 Glossary - GLOSSARY SIG RTN Signal Return SSCC Symptom-to-System-to-Component-to-Cause SW B+ Switched Battery Voltage TC Traction Control TPS Throttle Position Sensor TSB Technical Service Bulletin VECI Vehicle Emissions Control Information VIN Vehicle Identification Number VSS Vehicle Speed Sensor WSS Wheel Speed Sensor WDS World Diagnostic System WOT Wide Open Throttle Glossary - September, 2005 Brake System Diagnosis and Repair TOOL LIST TOOL LIST z Rotunda Pro-Cut On Car Brake Lathe 201-00002 z Vise-Grip Type Dial Indicator 134-R0199 (Shipped w/Rotunda Brake Lathe) z Rotunda Brake Pedal Effort Gauge 014-R1051 z Rotunda Vacuum Bleeder 164-R1570 z Accutorq® Wheel Nut Tightening Sockets 164-R0324 z Rotunda ABS and Brake Pressure Test Kit 107-02353 z Disc Brake Caliper Lubricant (XG-3-A) z Silicone Brake Caliper Grease and Dielectric Compound (XG-3-A) or equivalent meeting Ford specifications ESE-M1C171-A z Ford Premium Long Life Grease (XG-1-C) Brake System Diagnosis and Repair September, 2005 Tool - TOOL LIST Tool - September, 2005 Brake System Diagnosis and Repair QTY PART I BAL OF NO ITEM NUMBER PREFIX Dealer Parts Code #: Dealer Name: Address: City, State, Zip: Phone #: Fax #: Attention: Order Date: Ship to arrive by (Date or ASAP): Address: City, State, Zip: (if required) COL ADDITIONAL SPECIFICATIONS COL ORDER FORM OPTIONAL: CATALOG PAGE NO PART II DESCRIPTION Prices subject to change without notice EXTENDED TOTAL AUTHORIZED DEALERSHIP SIGNATURE (BUYER) PRINT NAME FCSD CREDIT MANAGER APPROVAL (ORDERS OVER $4,000) PART III TOTAL UNIT PRICE FAX NUMBER 1-800-762-6181 ❏ 36 Mo (Minimum $5,000) Buyer, having been quoted both an installment Price and a lesser Cash Price, hereby purchases from Seller on installment price basis, upon the terms and conditions set forth on the face hereof, the equipment to be delivered and installed at Buyer’s premises, as described above and agrees to pay Seller the Installment Price therefore as so set forth until paid in full ❏ 30 Day Open Account Installment Plan (Fixed Rate) ❏ 12 Mo (Minimum $1,000) ❏ 24 Mo (Minimum $3,000) ❏ 48 Mo (Minimum $10,000) ❏ 60 Mo (Minimum $15,000) (Reverse side must be completed) ❏ 90 Days Same as Cash (Minimum $1,000) Notice To Buyer: 315-195 Do not sign this contract before you read it or if it contains any blank spaces You are entitled to an exact copy of the contract you sign Under the law you have the right to pay off in advance the full amount due and under certain circumstances to obtain partial refund of the time charge BUYER ACKNOWLEDGES RECEIPT OF A TRUE AND COMPLETELY FILLED IN COPY OF THIS CONTRACT AT THE TIME OF SIGNING September 1999 FOR TELEPHONE ORDERS USE THE ROTUNDA TOLL-FREE NUMBER 1-800-ROTUNDA (768-8632) DEALER: Be sure you have completed Parts I and II for all orders, Part III for Installment Plan Orders 315-195 (Previous editions may not be used) Payment and Terms of Payment a If Buyer has requested the Dealer Open Account payment plan via the Ford Dealer Statement in Part II of the order form, and Seller agrees to sell pursuant to such plan, then Buyer shall pay the total purchase price shown on the invoice b If Buyer has requested the Installment Plan (Fixed Rate) in Part II of the order form, and Seller agrees to sell pursuant to such Plan, then Buyer shall pay the Down Payment (if any), and the Time Balance in equal monthly installments in accordance with the terms set forth below c If Buyer has requested the Installment Plan (Variable Rate) in Part II of the order form, and Seller agrees to sell pursuant to such Plan, then Buyer shall pay the Total Cash Price and any interest thereon in accordance with the Loan and Security Agreement to be executed by Buyer and Seller Title Title to Equipment purchased by Buyer from Seller shall pass to Buyer upon Seller’s receipt of all amounts owing by Buyer to Seller hereunder Risk of Loss Seller shall be responsible for risk of loss until Equipment is delivered to the location set forth herein, at which time risk of loss shall be the responsibility of Buyer Acceptance and Inspection Buyer shall be deemed to have accepted Equipment upon Seller’s delivery Equipment shall be deemed to have been delivered in good condition unless Buyer gives Seller notice to the contrary within 10 days after Seller’s delivery Delays Seller shall not be liable for any failure or delay in delivering Equipment, or for any failure to perform any provision hereof, resulting from fire, flood or other casualty, riot, strike or other labor difficulty, governmental regulation or other restriction, or any other cause beyond Seller’s control Unconditional Obligation Buyer’s obligation to make payments to Seller or its assignee shall be absolute and unconditional and shall continue unmodified despite any loss, damage or other interruption in the use of Equipment The obligation of Buyer to pay in full any amounts due under this contract shall not be subject to dispute, claim, counterclaim, defense or other right which Buyer may have to assert against Seller or the manufacturer of Equipment Buyer acknowledges that: (a) Buyer has selected Equipment and Manufacturer, and Buyer has determined Equipment’s suitability and fitness for the Buyer’s purpose, (b) Seller is not the manufacturer of Equipment, and (c) Manufacturer issues its own warranty and performs the obligations under such warranty Warranty THE MANUFACTURER’S WARRANTY SHALL BE BUYER’S EXCLUSIVE REMEDY, RECOURSE OR DAMAGE FOR ANY DEFECT IN WORKMANSHIP OR MATERIAL OR ANY FAILURE OF THE EQUIPMENT SELLER MAKES NO WARRANTIES, REPRESENTATIONS, INDEMNITIES OR GUARANTEES WHATSOEVER WITH RESPECT TO EQUIPMENT EITHER EXPRESS OR IMPLIED, ARISING BY LAW OR CUSTOM, INCLUDING ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THE LIABILITY OF THE SELLER SHALL BE LIMITED TO EXPRESS OBLIGATION TO DELIVER THE EQUIPMENT UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE OR RESPONSIBLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, WHETHER FORESEEABLE OR UNFORESEEABLE, WHICH BUYER MAY INCUR, EXPERIENCE OR CLAIM, INCLUDING, BUT NOT LIMITED TO, CLAIMS FOR LOSS OF PROFITS, INTERRUPTION IN BUSINESS, LOST OPPORTUNITY, WORK STOPPAGE OR OTHER IMPAIRMENT OF ASSETS, ARISING OUT OF MISREPRESENTATION, NEGLIGENCE, STRICT LIABILITY, IN TORT OR OTHERWISE, ON ACCOUNT OF ENTERING INTO OR RELYING ON THIS AGREEMENT, EVEN IF SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Freight and Taxes Freight costs and applicable taxes will be added to the final invoice and will be borne by Buyer Security Interest Buyer hereby grants to Seller a continuing security interest in the Equipment, including all products and proceeds thereof, until all amounts due hereunder are paid Buyer agrees to execute, and pay filing fees for, any financing statement or other documents deemed necessary by Seller to maintain a valid security interest in the Equipment 10 Maintenance Buyer shall use the Equipment carefully and properly Buyer, at Buyer’s own expense, shall maintain and repair all items of the Equipment in order to keep them TERMS & CONDITIONS in good order and condition and, in particular, shall comply fully with the maintenance, operating, usage or other instructions provided by the manufacturer Buyer authorizes Seller, or any third party appointed by Seller, to inspect the Equipment when necessary Buyer shall at all times keep the Equipment free and clear of all liens, charges or encumbrances 11 Personal Property Ford proprietary diagnostic equipment (including the software, if applicable) shall be kept at Buyer’s premises as listed on the reverse side and shall remain personal property regardless of how and to what degree it may be affixed or attached to any building or structure or what may be the consequence of its removal from such building or structure Buyer shall not encumber the Equipment (including software, if applicable) until all amounts owing to Seller hereunder are paid In addition, Seller grants to Buyer, and Buyer accepts, a non-exclusive license to use the Equipment (including the software, if applicable) in accordance with the terms and conditions set forth herein The license (and Equipment) shall not be leased, sold, assigned or otherwise transferred, in whole or in part In the event, Buyer proposes to lease, sell assign or otherwise transfer the Equipment (and/or its software, if applicable), in whole or in part, to any person or entity, Ford Motor Company shall have a Right of First Refusal to purchase the Equipment (including all software, if applicable) for Ten and 00/100 Dollars ($10.00) in U.S currency 12 Insurance and Indemnification Buyer shall defend, indemnify and hold harmless Seller from and against, and at Buyer’s own expense provide insurance satisfactory to Seller covering any and all losses, damages, claims, expenses and other liabilities (including attorney’s fees,) relating to or arising out of: (I) damage, loss, theft, or destruction of the Equipment, or (ii) death, injury or property damage connected with the use, operation or condition (including without limitation, defects whether or not discoverable by any party) of the Equipment Buyer shall promptly notify Seller of any such claim Seller shall have the right to participate, at its own expense, in any proceeding for which Buyer has undertaken the defense of Seller, and in no event shall Buyer settle any claim against Seller without Seller’s prior written consent, Buyer shall provide evidence of such insurance to Seller upon demand Seller is under no obligation to examine any insurance certificate or advise Buyer that its insurance does not comply with the requirements set forth herein The losses covered by insurance shall in all cases be payable to Seller and Buyer as their interests may appear If Buyer fails to insure the Equipment as herein provided, Seller may, but is not obligated to, place such insurance upon the Equipment and the Buyer agrees to pay to Seller on demand the premiums for such insurance placed by Seller In no event shall any insurance coverage be deemed to limit or replace Buyer’s obligation to indemnify Seller as provided herein 13 Default In the event that Buyer: (a) fails to pay any amount due hereunder within ten (10) days of the due date, (b) fails to comply with any other provision hereof, (c) files, or if there is filed against Buyer, any petition under any bankruptcy or insolvency laws or suffers the appointment of any trustee or receiver for all or any part of Buyer’s business or assets, or (d) has any assignment (voluntarily or involuntarily), lien, attachment or levy issued against the Equipment (unless such petition, assignment or appointment, lien, attachment or levy is withdrawn or nullified within twenty (20) days) then Buyer shall be in default hereunder and all of Buyer’s indebtedness and obligations to Seller shall, at Seller’s option, become immediately due and payable, and Seller may, at its option, terminate this contract and repossess any and all items of Equipment with or without legal process and sell the same at private or public sale without prior notice to Buyer to the extent permitted by law Upon request, Buyer shall deliver the Equipment to Seller at a place designated by Seller Repossession and/or sales of the Equipment upon such default shall not affect the Seller’s right to retain all payments made prior to repossession or to recover the balance due hereunder for any deficiency Buyer shall reimburse Seller all costs of collection, repossession and resale (including reasonable attorneys’ fees, court costs and other expenses incurred by Seller.) Buyer hereby releases Seller from any liability for damages resulting from repossession hereunder The rights and remedies of Seller, in the event of default herein mentioned shall not be deemed exclusive but shall be cumulative and in addition to all other rights and remedies existing under law, and may be enforced successively or concurrently Waiver by Seller of any default shall not be deemed a waiver of any other default 14 General The waiver by either party of, or failure to claim, a breach of any provision of this contract shall not be deemed to be a waiver of any provision of this contract, shall not be deemed to be a waiver of any subsequent breach or to affect in any way the effectiveness of such provision This contract constitutes the entire agreement between the par- ties and may not be changed except by an instrument in writing signed by the party to be charged This contract may not be assigned by Buyer without the Seller’s prior written consent Seller may assign this contract at any time but shall not thereby be relieved from any liability hereunder In the event that one or more clauses of this contract are found to be unenforceable, illegal or contrary to public policy by court of competent jurisdiction, the remainder of this contract shall remain in full force and effect except for the unenforceable, illegal or other provisions This agreement is a Michigan agreement and shall be interpreted, construed and enforced in accordance with the laws of the State of Michigan, United States of America Each of the parties here to agrees that any legal or equitable action or proceeding with respect to this agreement shall be brought only in any court of the State of Michigan, or in any court of the United States of America sitting in Michigan, and each of the parties hereto submits to and accepts generally and unconditionally the jurisdiction of those courts with respect to such party’s person and property Each party hereby irrevocably waives any objection to the laying of venue of any such action or proceeding in the above described courts $ $ 15 Finance Charge Monthly portion of Finance Charge (Part III, Item 3) due is calculated each month by multiplying 1/12 of the annual finance charge rate times the remaining portion of the Unpaid Balance of Cash Price, and is added to the portion of the Unpaid Balance of Cash Price due each month PART III Cash Price $ Installment Plan Agreement Down Payment (if any) $ Unpaid Balance of Cash Price (Difference between and 2) Finance Charge (Finance charge will reduce each month) Call 1-800-768-8632 for the current finance charge rate $ $ Time Balance (3 + 4) Number of Installments ❏ 12 ❏ 24 ❏ 36 ❏ 48 ❏ 60 equal monthly installments Taxes and transportation (if any) will be billed separately Installment Payment Price (1 + 4) 315-195 Date: Prices subject to change without notice MAIL COMPLETED ORDER FORM TO: ROTUNDA EQUIPMENT PROGRAM P.O Box 1450 Kenosha, WI 53141 I agree to pay the time Balance set forth in accordance with the above schedule and the terms and conditions of this order form Dealer Signature: September 1999 ... YES NO Basic Electrical Diagnosis March, 2006 - 11 LESSON ONE - ACTIVITY NOTES - 12 March, 2006 Basic Electrical Diagnosis LESSON ONE - ACTIVITY ACTIVITY Basic Electrical Diagnosis March 2006 -... activity Basic Electrical Diagnosis March, 2006 - 21 LESSON ONE - ACTIVITY NOTES - 22 March, 2006 Basic Electrical Diagnosis LESSON ONE - ACTIVITY ACTIVITY Basic Electrical Diagnosis March, 2006. .. in a series circuit uses the most voltage March, 2006 Basic Electrical Diagnosis LESSON ONE - ACTIVITY ACTIVITY Basic Electrical Diagnosis March, 2006 1-7 LESSON ONE - ACTIVITY ACTIVITY RESISTANCE