Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống
1
/ 68 trang
THÔNG TIN TÀI LIỆU
Thông tin cơ bản
Định dạng
Số trang
68
Dung lượng
4,83 MB
Nội dung
Nhóm: Nguyễn Xuân Hàm – 07520103 Lê Cao Trí – 07520370 Nguyễn Minh Huy – 07520154 SDM – Security Device Manager: là công cụ cấu hình Router dựa trên nền web Cấu hình: interface LAN & WAN, routing, NAC, NAT, firewall, IPS, VPNs… Hỗ trợ: Cisco 830 – 7301 • Cấu hình • Kiểm tra kết nối • Giám sát Basic Configuration Interface Routing Access Lists NAT WAN Ping CPU, Memory, Flash Interface Firewall VPN Traffic QoS NAC Logging IPS This window shows the configuration for dynamic NATing with the address pool Click Designate NAT Interfaces Select Configure > VPN > Easy VPN Server from the Home window and click Launch Easy VPN Server Wizard AAA must be enabled on the router before the Easy VPN Server configuration starts Click Yes to continue with the configuration The 'AAA has been successfully enabled on the router' message displays on the window Click OK to start the Easy VPN Server configuration Click Next to start the Easy VPN Server Wizard Select the interface on which the client connections terminate and the authentication type Click Next to configure the Internet Key Exchange (IKE) policies and use the Add button to create the new policy Click Next to choose the default transform set or add the new transform set to specify the encryption and authentication algorithm. In this case, the default transform set is used Click Next to create a new Authentication, Authorization, and Accounting (AAA) authorization network method list for group policy lookup or to choose an existing network method list used for group authorization Configure user authentication on the Easy VPN Server This window allows you to add, edit, clone, or delete user group policies on the local database Enter a name for the Tunnel Group Name Supply the pre-shared key used for authentication information Create a new pool or select an existing pool used to allocate the IP addresses to the VPN Clients This window shows a summary of the actions that you have taken Click Finish if you are satisfied with your configuration The SDM sends the configuration to the router to update the running configuration Click OK to complete After completion, you can edit and modify the changes in the configuration, if needed. ... Chỉ sử dụng cho Router Cisco Chỉ quản trị Router Release Notes for Cisco Router and Security Device Manager 2.5 (June 16, 2009) Cisco Router and Security Device Manager http://www.cisco.com/en/US/products/sw/secur... SDM – Security Device Manager: là công cụ cấu hình Router dựa trên nền web Cấu hình: interface LAN & WAN, routing, NAC, ... Logging IPS SDM là công cụ cấu hình Router (NAT, VPNs, ACL…) Chức năng giám sát (Interface, NAT, Bandwith…) Test connection (Interface, Tunnel) Điểm mạnh: công cụ mạnh về cấu hình