1. Trang chủ
  2. » Kỹ Thuật - Công Nghệ

cach chuyen mau mat dinh cua chi tiet

1 219 0

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 1
Dung lượng 14,62 KB

Nội dung

• • For Pro/ENGINEER and Wildfire 2.0 - 4.0 Open the model template or start part Click View > Color and Appearance > Select a color > Apply > Close File > Save • For Pro/ENGINEER and Creo Elements/Pro Wildfire 5.0 Open the model template or start part Click Apperance Gallery > Select a color > Click the model name at Model tree > OK File > Save • For Creo Parametric 1.0, 2.0 Open the model template or start part Click Apperance Gallery at View tab > Select a color > Click the model name at Model tree > OK File > Save It is achievable in Creo Parametric by modifying the default.dmt: In the Render tab, in the Apperance Gallery cascade button, click the Apperances Manager menu In the Apperances Manager, click the File button In the list, select Open In the Open window, in the \Common Files\\graphic-library\appearances folder, select the default.dmt file In the My Appearances list, select the ptc-default-surface, ptc-default5 solid or ptc-default-ecad Appearance In the Basic tab, in the Properties frame, click the Color button In the Color Editor, change the color as your need Click the OK button In the Appearances Manager window, in the File button, select Save As 10 In the Save As window, select the default.dmt file 11 Click the OK button 12 In the Duplicate File Name Found window, click the OK button 13 Click the Close button 14 Restart Creo Parametric

Ngày đăng: 19/05/2017, 11:24

TỪ KHÓA LIÊN QUAN

w