The rules for semirigid joints are not applicable for steels with grades greater than S460 up to S700. If nonlinear plastic global analysis considering the partial plastification of members in plastic zones is used, connections between members shall only be on the basis of fullstrength joints. If elastic global analysis is used, connection with partialstrength joints may be used, provided that the resistance of joints exceeds the actual internal forces and moments in the connected elements. In both cases the resistance of joints should be determined based on elastic distribution of forces over the components of a joint.
BS EN 1993-1-12:2007 BRITISH STANDARD Eurocode — Design of steel structures — Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700 The European Standard EN 1993-1-12:2007 has the status of a British Standard ICS 91.010.30; 91.080.10 12 &23[...]... 14 5 12 5 10 5 90 80 65 55 17 0 14 5 12 5 10 5 90 80 65 19 5 17 0 14 5 12 5 10 5 90 80 200 19 5 17 0 14 5 12 5 10 5 90 200 200 19 5 17 0 14 5 12 5 10 5 205 200 200 19 5 17 0 14 5 12 5 14 0 12 0 10 0 85 75 60 50 16 0 14 0 12 0 10 0 85 75 60 18 5 16 0 14 0 12 0 10 0 85 75 200 18 5 16 0 14 0 12 0 10 0 85 200 200 18 5 16 0 14 0 12 0 10 0 200 200 200 18 5 16 0 14 0 12 0 13 0 11 0 95 80 65 55 45 15 0 13 0 11 0 95 80 65 55 17 5 15 0 13 0 11 0 95 80 65 200 17 5 15 0 13 0... 19 93-6 (1) The design rules in the application parts EN 19 93-2 to EN 19 93-6 can also be applied to steels with grades greater than S460 up to S700 NOTE The National Annex to this Part may limit the range of applicable grades of steel for EN 19 93-2 to EN1993- 6 ```,,`,`````,,`,,``,`,,,,,`,,-`-`,,`,,`,`,,` - 9 BS EN 19 93 -1- 12: 2007 BSI — British Standards Institution BSI is the independent national body responsible... 13 0 11 0 95 80 200 200 17 5 15 0 13 0 11 0 95 200 200 200 17 5 15 0 13 0 11 0 12 0 10 0 85 75 60 50 45 14 0 12 0 10 0 85 75 60 50 16 5 14 0 12 0 10 0 85 75 60 19 0 16 5 14 0 12 0 10 0 85 75 200 19 0 16 5 14 0 12 0 10 0 85 200 200 19 0 16 5 14 0 12 0 10 0 -20 -20 -20 -20 -20 40 40 40 40 40 80 75 70 65 60 45 40 35 30 30 35 30 30 25 25 30 25 20 20 20 20 20 15 15 15 12 5 10 5 11 5 95 10 5 90 10 0 85 95 80 50 45 40 35 35 40 35 35 30 30 19 5 17 0... 17 0 14 5 12 5 10 5 18 5 16 0 14 0 12 0 10 0 18 0 15 5 13 0 11 0 95 17 0 14 5 12 5 10 5 90 16 5 14 0 12 0 10 0 85 65 60 55 50 45 55 50 45 40 35 85 80 75 70 65 70 65 60 55 50 60 55 50 45 45 90 85 80 75 70 80 75 70 65 60 2 .11 Additional rules to EN 19 93 -1- 11 The standard is applicable to steels with grades greater than S460 up to S700 without further additional rules 3 Additional rules to application parts EN 19 93-2 to EN 19 93-6...EN 19 93 -1- 12: 2007 (E) Table 4 — Maximum permissible values of element thickness t in mm Steel grade Subgrade EN 10 025-6 S500 Q Q QL QL QL1 QL1 S550 Q Q QL QL QL1 QL1 S620 Q Q QL QL QL1 QL1 S690 Q Q QL QL QL1 QL1 EN 10 149-2 S500 MC S550 MC S600 MC S650 MC S700 MC Charpy Reference temperature TEd [°C] energy CVN 10 0 -10 -20 -30 -40 -50 10 0 -10 -20 -30 -40 -50 10 0 -10 -20 -30 -40 -50 at T J σEd... those that have been published as British Standards, unless otherwise requested Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service Various BSI electronic information services are also available which give details on all its products and services Contact the Information Centre... Centre Tel: +44 (0)20 8996 711 1 Fax: +44 (0)20 8996 7048 Email: info@bsi-global.com Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details of these and other benefits contact Membership Administration Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 70 01 Email: membership@bsi-global.com Information regarding... Designs and Patents Act 19 88 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI BSI 389 Chiswick High Road London W4 4AL This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type... would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400 BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions... responsible for preparing British Standards It presents the UK view on standards in Europe and at the international level It is incorporated by Royal Charter Revisions British Standards are updated by amendment or revision Users of British Standards should make sure that they possess the latest amendments or editions It is the constant aim of BSI to improve the quality of our products and services We would