Cách móc Búp bê thỏ Bunny dễ làm, siêu dễ thương, kiểu 2 mới lạ cho bé

Cách móc Búp bê thỏ Bunny dễ làm, siêu dễ thương, kiểu 2 mới lạ cho béCách móc Búp bê thỏ Bunny dễ làm, siêu dễ thương, kiểu 2 mới lạ cho béCách móc Búp bê thỏ Bunny dễ làm, siêu dễ thương, kiểu 2 mới lạ cho béCách móc Búp bê thỏ Bunny dễ làm, siêu dễ thương, kiểu 2 mới lạ cho béCách móc Búp bê thỏ Bunny dễ làm, siêu dễ thương, kiểu 2 mới lạ cho bé

This is a free amigurumi pattern that I have shared on my Etsy listing ages ago Decided to post it over here so that I not have to keep re-list the free pattern Materials:  Acrylic yarn - White (turquoise or blue, white, pale yellow or orange, grey)  Stuff of your choice (I normally prefer polyfill)  One pair of black beads / plastic eyes (size of your choice)  Black embroidery floss (for attaching the black beads as eyes) Tools:  Crochet hook size C (or any crochet hooks suitable for the yarn you use)  Tapestry needle & Sewing needle for yarn Finished Size: Approximately 11cm tall (I use a Clover size C crochet hook.) *Your finished doll might finish in bigger or smaller than mine depending on your tension and the yarn you use.* Abbreviation: R = Round ch = chain sc = single crochet st = stitch inc = increase (2sc in a stitch) dec = decrease (2sc off together) sl st = slip stitch(es) * = repeat directions between * and * as many as indicated () = number of stitches in each round NOTES: 1) Work in continuous spiral round; not join rounds unless otherwise stated Mark first stitch of each round 2) To change color, work last st of old color to last yarn over Yarn over with new color and draw through all loops on hook to complete st Penguin x (blue & white colour) Start with blue color; make adjustable rings R1: sc in rings (6) R2: inc (12) R3: *sc 1, inc 1*, repeat times (18) R4: *sc 2, inc 1*, repeat times (24) R5: *sc 3, inc 1*, repeat times (30) R6: *sc 4, inc 1*, repeat times (36) R7: *sc 5, inc 1*, repeat times (42) R8: sc in each stitch (42) R9: *sc 6, inc 1*, repeat times (48) R10: sc in each stitch (48) R11: *sc 7, inc 1*, repeat times (54) R12 - R15: sc in each stitch (54) Everything is in blue from R1 to R15 You need to change colour for the remaining rounds R16: sc 18 (blue), sc 18 (white), sc 18 (blue) (54) R17: sc 17 (blue), sc 20 (white), sc 17 (blue) (54) R18 - R22: sc 16 (blue), , sc 16 (blue) (54) R23: (blue), (white), (blue)(48) R24: (blue), (white), (blue) (42) R25: (blue), (white), (blue) (36) R26: (blue), (white), (blue) (30) R27: (blue), (white), (blue) (24) Change to white: R28: *sc 2, dec 1*, repeat times (18) R29: *sc 1, dec 1*, repeat times (12) R30: *dec 1*, repeat times (6) Close with sl st, leaving a long tail for sewing Weave tail through last round and gather tightly Knot to secure Edit: 21/12/2012 - There is slight error in R2 which i amend it Will post up either photo tutorial / video soon! thanks! Beak: (orange color) We are going to crochet an oval and fold into half before sew & attach it to the body of penguin Click here for the extra helpful video tutorial about how to crochet an oval (Note: the number of sc in my pattern & the video tutorial is different) Start with orange color, make 11 ch, (last chain is a 'turning chain' which will not be worked into later) R1: sc 9, inc 2, sc 8, inc 1, sl st (22) R2: Ch 1, inc 1, sc 8, inc 5, sc 8, inc 3, sl st (28) R3: Ch 1, inc 1, sc 9, inc 1, sc 1, inc 1, sc 1, inc 1, sc 9, inc 1, sc 1, inc 1, sc 1, sl st (34) R4: Ch 1, inc 1, sc 10, inc 1, sc 2, inc 1, sc 2, inc 1, sc 10, inc 1, sc 2, inc 1, sc 2, sl st (40) Fasten off & leave a long tail for sewing Remember to fold into half before sewing& attach it to the R15 of the penguin ** Alternatively, if you are still clueless on how to crochet an oval, you could try this pattern for making the beak Start with orange yarn, make adjustable rings R1: sc in rings (6) R2: inc (12) R3: *sc 1, inc 1*, repeat times (18) R4: *sc 2, inc 1*, repeat times (24) R5: *sc 3, inc 1*, repeat times (30) Fasten off & leave a long tail for sewing Remember to fold into half before sewing & attach it to the R15 of the penguin ** Wings: (Make 2, blue colour) Start with adjustable rings R1: sc in rings (6) R2: inc (12) R3: *sc 3, inc 1*, repeat times (15) R4: sc in each stitch (15) R5: sc in each stitch (15) R6: *sc 3, dec 1*, repeat times (12) Fasten off & leave a long tail for sewing Remember to fold into half before sewing & attach it to the R17 on each side of the penguin Feet: (Make 2, orange colour) Start with adjustable rings R1: sc in rings (6) R2: *inc 1, sc 1*, repeat times (9) R3: *inc 1, sc 2*, repeat times (12) R4: **sc 2, dec 1*, repeat times (9) R5: *sc 1, dec 1*, repeat times (6) Fasten off & leave a long tail for sewing *Sew all parts together & a pair of platic eyes* Materials:  Acrylic yarn -Purple, Lilac & White  One pair of black beads / plastic eyes (size of your choice)  Black embroidery floss (for attaching the black beads as eyes) Tools:  Crochet hook size C (or any crochet hooks suitable for the yarn you use)  Tapestry needle & Sewing needle for yarn Finished Size: Approximately 6cm tall (bottom to tip of the bunny ears), 11cm width (I use a Clover size C crochet hook.) *Your finished doll might finish in bigger or smaller than mine depending on your tension andthe yarn you use.* Abbreviation: R = Roundch = chain sc = single crochet st = stitch inc = increase (2sc in a stitch) dec = decrease (2sc off together) sl st = slip stitch(es) * = repeat directions between * and * as many as indicated () = number of stitches in each round NOTES: 1) Work in continuous spiral round; not join rounds unless otherwise stated Mark first stitch of each round 2) To change color, work last st of old color to last yarn over Yarn over with new color and draw through all loops on hook to complete st Bunny Ears x (Lilac & purple color) Start with lilac color; make adjustable rings R1: sc in rings (6) R2: inc (12) R3: *sc 1, inc 1*, repeat times (18) R4: (lilac), (purple), (lilac) (21) R5 - R13: (Lilac), (purple), (lilac) (21) Fasten off & leave a long tail for sewing Hat x (Lilac color) Start with lilac color; make adjustable rings R1: sc in rings (6) R2: inc (12) R3: *sc 1, inc 1*, repeat times (18) R4: *sc 2, inc 1*, repeat times (24) R5: *sc 3, inc 1*, repeat times (30) R6: *sc 4, inc 1*, repeat times (36) R7: *sc 5, inc 1*, repeat times (42) R8: *sc 6, inc 1*, repeat times (48) R9: sc in each stitch (48) R10: *sc 7, inc 1*, repeat times (54) R11 - R14: sc in each stitch (54) Fasten off & leave a long tail for sewing Bunny muzzle / nose x (White color) Start with white color; make adjustable rings R1: sc in rings (6) R2: inc (12) R3: *sc 3, inc 1*, repeat times (15) Fasten off & leave a long tail for sewing *Sew all parts together & a pair of plastic eyes + x black bead as nose Try pinning down the bunny ears before attaching them to the hat as it is quite tricky to fold and sew the ears.*